Mocka Nava User manual

Nava Two Drawer Bedside Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
bolt
x6
x4
ABC D E F G HJ
KLM N
I
O P
dowel
x10
screw
x26
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
l ocking
nut x6
screw
x12 x4
x4 bolt
x8
locking
nut x8
small small
Q
wedge
x4
screw
x2
bracket
cover
x2
bolt
washer
x24
R
screw seal
x2
ST
key x1
Allen plastic
glide x4
U
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Hardware Supplied

Nava Two Drawer Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Attach 2x slide rails (F) and 2x slide rails (G) to panels [3] and [4] as shown
with 12x screws (E). Insert 2x bolts (C) into panels [3] and [4]. Tighten with
a screwdriver.
F
CL
E
Attach 2x brackets (M) to panels [5] and [2], secure with 4x
screws (E). Tighten with a screwdriver. Place 2x covers (N) over
the brackets (M) as shown.
G
CR
E
EE
M
N
M
E
E
E
E
E
F
E
E
E
E
E
E
F
GE
E
E
G
EE
M
C
C
4
3
2
5

Nava Two Drawer Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panel [3] and [4] to panel [5] with 2x dowels (A) and secure
with 2x locking nuts (D). Tighten with a screwdriver.
Insert 4x bolts (C) into panel [1] and tighten with a screwdriver.
A
A
D
DC
C
C
C
4
3
1
5
D

Nava Two Drawer Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panel [3] and [4] to [1] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
Slide panel [6] down along the grooves between the panels [3] and [4].
A
A
A
D
D
D
A
4
4
6
3
3
1

Nava Two Drawer Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panels [9] to panels [7] and [8] with 16x screws (R).
Tighten with a screwdriver.
B
B
B
B
A
A
A
R
R
R
R
4
3
7
8
8
7
9
9
9
9
2
R
Attach panel [2] to the rest of the unit using 4x dowels (A) and secure
with 4x screws (B) as shown. Tighten with a screwdriver.
B

Nava Two Drawer Bedside Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Attach panels [7] and [8] to panel [2] using 8x screws (B). Tighten with
a screwdriver.
Attach Legs [10] to panels [9] with 4x washers (L) and 4x bolts (Q).
Tighten with the Allen key (T). Attach 4x plastic glides (U) to the
legs using a hammer as shown.
T
B
B
BB
B
B
B
B
L
L
Q
U
U
U
U
Q
4
3
2
3
7
3
7
3
8
3
8
9
9
9
10
10
10
10
9

Nava Two Drawer Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
12 Drawers x211 Drawers x2
O
O
O
O
PP
PP
RR
RR
H
I
Insert 4x small bolts (O) to panel [11] and attach 1x seal (S) using 1x screw
(E) to panel [11]. Attach panels [12] and [13] to panel [11] with 4x small locking
nuts (P). Tighten with a screwdriver. Slide panel [14] along the grooves between
the panels [12] and [13] to form the base of the drawer.
E
S
E
E
E
E
11
11
12
12
12
12
14
15
13
13
13
13
Attach panels [12], [13] and [15] as shown using 4x screws (R).
Tighten with a screwdriver. Attach slide rail (I) and slide rail (H) to
the underside of the side panels as shown. Secure with 4x screws
(E) and tighten with a screwdriver.

Nava Two Drawer Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Insert the assembled drawers into the corresponding compartments as
shown. Ensure the drawers slide easily along the rails. If the door is not
catching or sitting flush, twist the end of the cover (N) until it catches on
the seal (S).
Attach 4x wedges (J) into the corners of the back of the unit and secure
with 4x screws (K). Tighten with a screwdriver. Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.
J
K
J
K
J
K
V
W
Z
J
K
K
J
screw
strap
washer
N
6
11
11

Nava Two Drawer Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Once assembled lift furniture into place, do not drag. Attach the other
end of the safety straps (V). Fasten to the wall using 1x washer (Z), 1x
wall anchor (X) and 1x screw (Y). Ensure the unit is balanced and steady
before use. You’re done, enjoy!
You’re done, enjoy!
X
Y
Z
wall
anchor
screw
strap
washer