Mocka Tahoe Buffet User manual

1
Phillips & Flathead screwdrivers and hammer required *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
ABC D E F
HIJK L M
G
Hardware Supplied
dowel
x32
bolt
x36
locking
nut x36
small
small
screw x24
long
screw x12
x18
long screw
X
Z
Y
W
safety
strap
x1
screw
x1
long
screw
x1
wall
anchor
x1
washer
x1
L + R
slide rail
x6
L + R
slide rail
x6
2
40
nut
x4
long
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note t hat different wall
materials may require different fixing devices from those supplied.
screw x4
hinge hinge
x4
x2
x36
N
long
screw x2
shelf
plug x2
O

2
12
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
A
5
5
5
1
A
A
A
A
YW
Insert 8 x bolts (A) into panels [5]. Tighten with a screwdriver.
A
A
B
BC
C
B
B
C
C
A
A
Insert 4 x locking nuts (B) into panel [1]. Attach 4 x bolts (A) into panel [1].
Attach 4 x dowels (C) ton panel [1] and secre with [5]. Attach 1 x wall strap
(W) to panel [1] using 1 x screw (Y). Tighten with a screwdriver.
Curved panel piece x 2

3
34
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
GG
3
A
EEEE
AAA
4
GG
GG
AAAA
EEEE
GG
66
Attach 1 x left slide rail (G) to panel [3] and secure with 2 x small screws (E).
Attach 1 x right slide rail (G) to panel [4] and secure with 2 x small screws (E).
Insert 4 x bolts (A) into panels [3] and [4]. Tighten with a screwdriver.
Attach 1 x left slide rail (G) and 1 x right slide rail (G) to panel [6] and secure
with 4 x small screws (E). Insert 4 x bolts (A) into panel [6]. Tighten with a
screwdriver.

4
56
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
GG
AAAA
EEEE
GG
99
10
4
9
C
C
C
C
B
B
B
B
B
Attach 1 x left slide rail (G) and 1 x right slide rail (G) to panel [9] and secure with
4 x small screws (E). Insert 4 x bolts (A) into panel [9]. Tighten with a screwdriver.
Insert 4 xdowels (C) into panel [10]. Attach panel [10] to panels [4] and [9]
and secure with 4 x locking nuts (B). Tighten with a screwdriver.

5
78
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
10
4
9B
B
Insert 4 x dowels (C) into panel [10]. Attach panel [10] to panels [3] and [6]
and secure with 4 x locking nuts (B). Tighten with a screwdriver.
6
11 B
B
B
C
C
C
C
10
6
11
10
9
4
3
C
C
B
B
B
B
B
Insert 4 x dowels (C) into panel [11]. Attach panel [11] to panels [6] and [9]
and secure with 4 x locking nuts (B). Tighten with a screwdriver.

6
910
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
4
9
63
C
2
I
8
8
7
7
II
J
J
I
J
J
I
with 4 x long bolts (J). Tighten with a screwdriver.
Insert 4 x nuts (I) into panels [8] . Attach panels [7] to panels [8] and secure
C
C
C
C
C
C
D
D
D
D
D
D
D
D
Insert 8 x dowels (C) into panel [2]. Attach panel [2] to panels [3]
[4], [6] and [9] and secure with 8 x long screws(D).
Tighten with a screwdriver.
C

7
11 12
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
D
D
D
D
D
D
D
D
D
D
Tighten with a screwdriver.
Attach panels [7] and [8] to panel [2] and secure with 10 x long screws (D).
Slide panels [12], [13] and [26] between the grooves on panels [3], [4], [6]
and [9] to form the back of the unit as shown.Tighten with a screwdriver.
3
4
9
6
12
13
26
3
2
8
7
N
N
O
N
O
Attach 2 x long screws (N) to centre support (O) as shown.

8
13 14
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
3
4
9
6
1
B
B
B
B
B
B
A
A
A
A
A
A
A
A
B
B
16
18
14
15
15
14
Tighten with a screwdriver.
Insert 8 x bolts (A) into panels [16] and [18] .Attach panels [14] and [15] to panels
[16] and [18]. Secure with 8 x locking nuts (B).
C
BB
BB
BBBB
C
CC
CC
CC
Insert 8 x dowels (C) into panel [1]. Attach panel [1] to panels [3], [4], [6] and [9]
and secure with 8 x locking nuts (B). Tighten with a screwdriver.

9
15 16
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
15
14
17
B
B
B
B
A
A
A
A
19
17 14 14
14
20
20
15
15
15
18
16
Tighten with a screwdriver.
Insert 4 x bolts (A) into panels [17]. Attach panels [14] and [15] to panel [17],
secure with 4 x locking nuts (B).
Slide panel [19] between the grooves on panels
[14] and [15] to form the base of the drawer as shown.
Slide panels [20] between the grooves on panels [14] and [15] to form the base
of the drawer as shown.
Tighten with a screwdriver.

10
17 18
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
F20
20
19
F
F
F
F
F
F
F
FF
FF
21
21
22
14
15
Tighten with a screwdriver.
Attach panels [21] and [22] to panels [14] and [15], secure with 12 x medium
screws (F).
15
15
14
14
Tighten with a screwdriver.
Attach 6 x slide rails (H) to panels [14] and [15] and secure with 12 x small
screws (E).
14
15
15
15
14
21
21
22
H
H
H
E
E
E
E
E
E
16
17
18
14
E
E
E
E
H
E
H
E
H

11
19 20
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
K
23
KLL
LL
K
L
25
LL
LL
K
K
K
L
M
24
MLL
LL
M
L
Attach 2 x hinges (M) to panel [24] and secure with 4 x small screws (L).
Tighten with a screwdriver.
Attach 2 x hinges (K) to panel [23] and secure with 4
x small screws (L).
Attach 2 x hinges (K) to panel [25] and secure with 4 x small screws (L).
Tighten with a screwdriver.

12
21 22
Tahoe Buffet
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au
NOTE: If the doors are
uneven or there is a gap in
the middle, loosen or tighten
the screw on the hinge until
Tighten with a screwdriver.
Move the unit into the desired location up against a wall. Use a drill to
create a small hole lining up with the top of the 1 x safety strap (W).
Fasten to the wall using 1 x wall anchor (X), 1x washer (Z) and 1x long
screw. Ensure the unit is balanced and steady before use. You’re done,
enjoy!
W
X
Z
K
K
L
L
25
24
23
16
17 18
Attach panels [23], [24] and [25] to panels as shown. Secure with 24 x
screws (L).