Mocka Bronte User manual

Bronte Four Drawer
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
WARNING: Any furniture that is not anchored to a wall
has the potential to tip over in certain circumstances, ie. if a
child attempts to climb on the furniture or in the event
of an earthquake. Accordingly, we recommend that all
furniture is anchored to a wall. We supply a free safety wall
anchor with all furniture sold and we recommend these are
used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that
different wall materials may require different fixing devices
from those supplied.
Wall
attachment
S
Hardware Supplied
screw
x2
A
screw
x20
F
rail
x4
K
dowel
x14
L
screw
x4
M
allen key
x1
N
brace
x12
O
screw
x12
T
screw
x16
G
guide
x4
H
screw
x4
I
left rail
x4
J
right rail
x4
B
locking nut
x38
C
bolt
x38
D
screw
x32
E
handle
x8
P
wall plug
x2
R
screw
x2
Q
wall strap
x2
U
screw
x10

1x4 2x4
Bronte Four Drawer
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [2], [4] and [3] to panel [1] as shown and secure with
5 x bolts (C) and 5 x locking nuts (B). Tighten with a screwdriver.
Slide panel [5] into position as shown.
B
C
5
2
1
4
3

3x4
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 2 x handles (E) to assembled frame and secure with 4 x screws
(T). Tighten with a screwdriver.
Attach panel [6] to assembled frame as shown and secure with 5 x
screws (A). Tighten with a screwdriver.
Bronte Four Drawer
4x4
6
T
A
A
E

5x4
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 1 x left rail (F) and 1 x right rail (G) to assembled frame as
shown and secure with 4 x screws (D). Tighten with a screwdriver.
Attach 4 x left rails (I) and 4 x right rails (J) to panels [7] and [8] as
shown and secure with 16 x screws (D). Tighten with a screwdriver.
Bronte Four Drawer
6
D
F
G
D D
JI
7 8

7
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [9] and [10] to panel [7] and secure with 7 x bolts (C),
3 x dowels (K) and 7 x locking nuts (B). Tighten with a screwdriver.
Slide panel [12] into position as shown. Attach panel [8] to assembled
frame and secure with 7 x bolts (C), 3 x dowels (K) and 7 x locking nuts
(B). Tighten with a screwdriver.
Bronte Four Drawer
8
B
B
B
C
C
B
K
C
C
K
9
7
9
9
10
12
8

9
6
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [11] to assembled frame as shown and secure with 4 x
bolts (C), 4 x dowels (K) and 4 x locking nuts (B). Tighten with a
screwdriver.
Attach panel [14] to assembled frame as shown and secure with 4 x
bolts (H) and 4 x dowels (K). Tighten with a screwdriver.
Bronte Four Drawer
10
B
K
H
CK
14
11

11
7
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [15] and [16] to assembled frame as shown and secure
with 4 x bolts (L) and 10 x screws (U). Tighten bolts with an Allen Key (M)
and screws with screwdriver.
Attach 12 x braces (N) to assembled frame and secure with 12 x
screws (O). Tighten with a screwdriver.
Bronte Four Drawer
12
U
L
N
O
15
15
16
16
M
L

13
8
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the 2 x safety straps (Q).
Fasten to the wall using 2 x wall anchors (P), 2 x screws (R) and 2 x
screws (S). Ensure unit is balanced and steady before use. You’re
done, enjoy!
Bronte Four Drawer
R
P
Q
S