Mocka Regent Bedhead Series User manual

Regent Bedhead - Double, Queen & King
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
ATTENTION:
DO NOT TIGHTEN THE SCREWS
FULLY DURING ASSEMBLY.
FULLY TIGHTEN SCREWS AFTER
THE FINAL ASSEMBLY STEP.
large bolt
x4
B
washer
x10
C
large allen
key
D
small bolt
x6
E
small allen
key
F
felt pad
x4

Regent Bedhead - Double, Queen & King
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 2 x legs to the back of the bedhead, at your preferred height,
and secure with 6 x washers (B) and 6 x bolts (D). Tighten with an Allen
Key (E). Attach the 4x felt pads (F) to the back corners of the bedhead
to prevent marking walls. Once assembled lift into place, do not drag.
You’re done, enjoy!
A
D
BD
BD
B
D
BD
BD
DE
B
B
Lift back the velcro flap on the back of the headboard. Attach panel [1]
and panel [2] together and secure with 4 x washers (B) and 4 x bolts
(A). Tighten with an Allen Key (C). Secure the flap back onto the
headboard by pressing down on the velcro.
1
2
A
A
AAA
BB
B
BB
C
1 2