Mocka Kids Rocking Fox User manual

Kids Rocking Fox
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting. AGE RECOMMENDATION 18m+
WARNING: Due to the small size of the hardware
and the sharp points of the screws, they are
potentially hazardous.
Keep all assembly parts and packaging materials
out of reach of children
Retain packaging information for future reference
Adult assembly required
A
Hardware Supplied
screws
x8
E
rockers
x2
F
body
x1
B
nuts
x4
C
handles
x2
D
cross bars
x2

1
Kids Rocking Fox
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
WARNINGS:
• Dispose of all packaging carefully and responsibly.
• Colour reproduction is as accurate as possible within the
limitations of the manufacturing process. Also note, colours may
vary under different lighting.
• Children should always wear appropriate shoes/ trainers.
• Only one child at a time should ride this toy.
• Use under adult supervision.
• Do not leave children sitting or playing unattended.
• Ensure that all the screws are firmly screwed. Check and tighten
all screws and bolts periodically.
• Item to be fully assembled by an adult.
• Keep small parts out of reach from children and pets.
• We do not recommend the use of power tools for inserting screws,
as this could damage the item. Only use hand screwdrivers.
• For indoor use only. Never use near steps, slopes or water.
• Keep away from heat sources and fire.
• Use a clean work surface. Remove all fittings from the plastic
bags and separate into their groups, checking all components are
present before assembly
CARE AND MAINTENANCE:
• Wash surface only with a damp cloth.
• Do not use chemical abrasive cleaners, bleaches or furniture
polishes as the finish could be affected.
• Not suitable for children under 18 months.
• Max user weight – 30Kgs.
• Please retain this information for future reference.
Attach 2 x cross bars (D) to 2 x rockers (E) and secure with 8 x screws
(A). Tighten with a screwdriver.
D
D
E
E
AA
A A
A A
A A

2
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Kids Rocking Fox
3
Insert the ends of the legs into the 2 x cross bars (D) holes as shown.
If the holes on the cross bar (D) are not lining up, place one leg in the
hole on the cross bar (D) and then apply pressure to get the other leg
to match up with the second hole on the cross bar (D).
D
Attach 1 x body (F) to the assembled rocker and secure with 4 x nuts
(B) and tighten. Attach 2 x handles (C) onto the body (F) as shown and
rotate to tighten.
B
B
B
B
C
C