Modal Electronics CRAFTsynth 2.0 User manual

UI COMBINATIONS
SHIFT + DIAL = BLUE PARAMETER
PRESET + DIAL = GREY PARAMETER
PRESET + KEY 1-8 = LOAD PRESET
PRESET + HOLD KEY 1-8 = SAVE PRESET
PRESET + KEY+ = PRESET BANK UP
PRESET + KEY- = PRESET BANK DOWN
PRESET + KEY- + KEY+ = INIT PRESET
ARP-SEQ = ARPEGGIATOR ON/OFF
ARP-SEQ + KEY 1-8 | EXT MIDI NOTE = INPUT NOTE IN ARPEGGIATOR PATTERN
ARP-SEQ + EG = INPUT REST IN ARPEGGIATOR PATTERN
TURN RATE/TIME DIAL BELOW ZERO = MIDI SYNC (LFO1, LFO2 + DELAY)
CLOCK PRIORITY = 1) SYNC 2) EXT MIDI 3) INTERNAL
MOD SOURCES ON CRAFT = LFO1, LFO2 + MOD-EG
MOD SOURCES ON MODALapp = NOTE, VELOCITY, AFTERTOUCH, MODWHEEL + EXT CC
HOLD LFO1 | LFO2 | MOD-EG = ASSIGN MODE
ASSIGN + PARAMETER = MOD SLOT PARAM + DEPTH
ASSIGN + LED FLASH = INVALID DESTINATION
KEY- + KEY+ = SUSTAIN ON/OFF
EG + A/D/S/R = ALL ENV A/D/S/R
LFO1 | LFO2 = SWITCH RATE/SHAPE DIAL TO EFFECT LFO1 OR LFO2
HOLD SHIFT + PRESET FOR 4 SECONDS - USE KEY- | KEY+ = MIDI CHANNEL
DIALS
PRESET
ARP-SEQ
CLOCK
MODULATION
OTHER

BATTERY INSTALLATION
ENSURE CORRECT BATTERY POLARITY - FAILURE TO INSTALL CORRECTLY MAY CAUSE PERMANENT DAMAGE