
4
1.
The appliance uses low-pressure LPG or piped gas (TPG).
Note: TPG needs to be adjusted.
2.
The appliance should be placed in a flat area and kept a minimum distance of 20cm away from the objects.
3.
There must be upper drainage or exhaust above the appliance.
4.
Adjsut the feet height to balance the appliance.
5.
Do not bend the gas pipelines to avoid congestion. Make sure the rubber tube connecting both ends is solid
and not leaking.
6.
Do not adjust the control valve. (Factory adjustments are well-adjusted).
1.
Check the gas before and after operating the main switch and the hole is tightly closed.
2.
Do not close the exhaust hole. Do not pile up flammable and explosive materials.
3.
Check the oil quality and time of its use.
4.
Discharging oil in the tank can be done when the temperature of oil has lowered down.
5.
Clean the tank off the impurities.
6.
Due to the insualting material, it is normal when the burning smell occurs in the first ignition.
7.
Do not drip the oil to the outlet.
1.
After filtratiion, discharge the oil.
2.
Clean up the tank (note that a temperature probe)
3.
Ensure the ignition key to open on the stop (off) position.
1.
Adopts scientific design, advanced technology, tube heating, and efficient use of gas.
2.
Do not use the re-used oil to maintain the quality.
3.
Automatic and accurate temperature control, producing delicious crispy food outside and tender inside.
4.
Accessories: a drip tray, a drip net, a pan and a strainer.
Part 1: Brief Introduction
Part 4: Appliance Features