Modus Furniture MEADOW 3F41D4 User manual

PARTS AND FITTING PACKAGING DETAIL
BOX #1
A. HEADBOARD 1 PC
MEADOW FULL/QUEEN/E.KING STORAGE ASSEMBLED HARDWARE* PACKED IN BOX #3
H1
YOUR BOX MAY CONTAIN EXTRA HARDWARE
4
PCS
A
BOX #2
B. FOOTBOARD 1 PC
BOX #3
C. SIDERAILS 2 PCS
BOX #4
G. BED SLATS 12 PCS
D. CENTER SUPPORT 1 PC
E. LEG SUPPORTS 2 PCS
F. HARDWARE BOX
E
D
G
C
B
H2 4
PCS H3 2 PCS
H4 36
PCS H5 1 PC
MEADOW
FULL/QUEEN/E.KING STORAGE BED
ASSEMBLY INSTRUCTIONS
PAGE 1 OF 2
A
C
B
H5
H1
H2
STEP 1: Attach one side rail (C) to the
Headboard (A) using one M8x20 Allen
Bolt and Washer (H2) through the metal 'L'
bracket and one M8x40 Allen Bolt (H1)
through the wooden cleat. Do not tighten
bolts completely. Repeat steps to attach
other end of the side rail to the Footboard
(B).
ALLEN BOLT (M6 x 50)
WOOD SCREWS (25MM) ALLEN KEY 4
ALLEN BOLT WITH FLAT
WASHER (M8 x 40)
ALLEN BOLT WITH FLAT
WASHER (M8 x 20)

PAGE 2 OF 2
A
C
B
A
C
B
D
E
H4
G
H5
H3
STEP 2: Repeat step 1 for the second side
rail. Tighten all bolts completely with the
provided Allen Key (H5)
STEP 3: Attach the support legs (E) to the
center support (D) using three M6x50
Allen Bolts.
STEP 4: Spread the slat roll (G) between
the wooden blocks on the side rails. Before
attaching with screws, position the center
slat support from step 3 underneath the slat
roll. Secure the slats with the provided
wood screws (H4).