Moduspace DF60 User manual

Version 2.0
Bespoke Showcase Engineers
DF60 Assembly Guide

Side Frame
Back Bar x 2
Back Frame Top
Bottom Bar x2
Side Frame
Front Bar x 2
Front Frame Top
Bottom Bar x 2
Side Frame Top
Bottom Bar x 4
Vertical
C-Channel x 4
Horizontal
C-Channel x 4 Conduits x 2
BarsDF60 Assembly Guide
Bespoke Showcase Engineers
1

M5-Long Screw x 16 M5-Short Screw x 8M4 Stacking Screw x 8
Stacking Bracket x 4
M5 Washer x 16
M5 Nuts x 8
Back Frame Foot Pad x 2
Front Frame Foot Pad x 2
M5 T-Handle
Allen Key x 1
Front Panel
Safety Screw x 1
Bespoke Showcase Engineers
2
Horizontal Bracket x 4
Accessories for connecting display cases
M4 Allen Key x 1
DF60 Assembly Guide Toolkit
Attention: If you are connecting multiple display cases, please refer to
“Connecting Display Cases” assembly guide before commencing.

Back Panel x 1
Top Panel x 1 Laminate Base x 1
Plexiglass Side Panel x 2 Plexiglass Front Panel x 1
Bespoke Showcase Engineers
3
DF60 Assembly Guide Panels

Magnet Magnet
Magnet
Magnet
Magnet
Magnet
Safety Pilot Hole
Side Frame
Top Bottom Bar
Bespoke Showcase Engineers
4
Attention: If you have a floor that could easily
scratched or damaged, please ensure you
cover the surface with a protective cover.
Attention: Please ensure you have all the
parts before commencing assembly. Please
read all of the instructions before commencing.
Attention: If you have purchased optional accessories,
please refer to the Optional Accessories assembly
instructions which are supplied separately.
DF60 Assembly Guide Overview
Side Frame
Back Bar
Back Frame
Top Bottom Bar
Side Frame
Top Bottom Bar
Side Frame
Front Bar
Back Frame
Top Bottom Bar
Side Frame
Top Bottom Bar Front Frame
Top Bottom Bar
Side Frame
Back Bar
Side Frame
Top Bottom Bar
Side Frame
Front Bar
Front Frame
Top Bottom Bar

Bespoke Showcase Engineers
5
DF60 Assembly Guide Preparation Work
You will need
If you are joining the display cases
horizontally, do not insert the C-Channel
on the connecting bar.
If you are joining the display cases
horizontally, do not insert the C-Channel
on the connecting bar.
Please make sure the C-channel
does not cover the pilot hole.
Please make sure the C-channel
does not cover the pilot hole.
C-Channel
Pilot Hole
• Side Frame Top Bottom Bar x 4
• Side Frame Back Bar x 2
• Side Frame Front Bar x 2
• Horizontal C-Channel x 4
• Vertical C-Channel x 4
Side Frame Top Bottom Bar
Position the bar on any side. Install a Horizontal
C-Channel into the top slit of the bar. Repeat for all bars.
Side Frame Front Bar
Place a bar with the magnets facing down.
Install a Vertical C-Channel into the top slit.
Repeat for all bars.
Side Frame Back Bar
Position the bar with the pilot holes facing
the flat surface. Install a Vertical C-Channel
into the top slit of the bar. Repeat for all bars.
Steps to install C-Channel
Step 1. Flatten one end of the C-Channel by
pressing the open edges together.
Step 2. Push the compressed tip into the slit
of the bar.
Step 3. Press down the rest of the C-Channel
You will need
Steps to insert M5-Long Screw
Step 1. Insert the M5-Long Screw fully into
the M5-Washer.
Step 2. Position the screw with washer into
the pilot hole on the left side of the
bar. Turn clockwise to tighten the
screw. Leave a 15mm gap between
the washer and bar.
Step 3. Repeat steps 1-2 for the other side
of the bar.
Step 4. Repeat steps 1-3 for
15mm
M5 Washer
M5 Washer
M5 Washer
• M5-Long Screw x 16
• M5-Washer x 16
• Side Frame Top Bottom Bar x 4
• Back Frame Top Bottom Bar x 2
• Front Frame Top Bottom Bar x 2
• Side Frame Top Bottom Bar x 4
• Front Frame Top Bottom Bar x 2
•Back Frame Top Bottom Bar x 2

Side Frame
Top Bottom Bar
Side Frame
Back Bar
Step 1.
Connect Side Frame Back Bar to Side Frame
Top Bottom Bar. Tighten the connecting
screw using the T-Allen Key.
Side Frame
Back Bar
Side Frame
Front Bar
Side Frame
Top Bottom Bar
Side Frame
Top Bottom Bar
Step 2.
Slide in the Plexiglass Side
Panel diagonally into the
C-Channels of the bars.
Step 4.
Press down the Side Frame Horizontal Bar
into the Plexiglass Side Panel. Tighten the
connecting screw using the T-Allen Key.
Plexiglass Side Panel Plexiglass Side Panel
C-Channel
C-Channel
DF60 Assembly Guide Left Side Panel
Bespoke Showcase Engineers
6
Check that the pilot holes
are facing outwards.
15mm
M5 Washer
15mm
M5 Washer
Step 3.
Connect Side Frame
Front Bar to Side Frame
Top Bottom Bar (Refer to
Step 1). Tighten the
connecting screw using
the T-Allen Key.
Pilot Hole

Side Frame
Top Bottom Bar
Side Frame Back Bar
Step 5.
Connect Side Frame Back Bar to Side
Frame Top Bottom Bar. Tighten the
connecting screw using the T-Allen Key.
Side Frame
Back Bar
Side Frame
Front Bar
Side Frame
Top Bottom Bar
Side Frame
Top Bottom Bar
Step 6.
Slide in the Plexiglass Side Panel
diagonally into the C-Channels of
the bars.
Step 8.
Press down the Side Frame
Top Bottom Bar into the
Plexiglass Side Panel.
C-Channel
C-Channel
DF60 Assembly Guide Right Side Panel
Bespoke Showcase Engineers
7
15mm
M5 Washer
Step 7.
Connect Side Frame Front
Bar to Side Frame Top
Bottom Bar (Refer to Step 1).
Plexiglass Side Panel
Plexiglass Side Panel

DF60 Assembly Guide Back Panel
Bespoke Showcase Engineers
8
Step 12.
Press Back Frame Top Bottom Bar
into Back Panel.
Step 11.
Slide in the Back Panel.
Step 10.
Connect Back Frame Top
Bottom Bar to Left Side Panel.
Step 9.
Connect Front Frame Top
Bottom Bar to Left Side Panel.
Magnet
15mm
M5 Washer
Plexiglass
Left Side Panel Back Panel
Please ensure the longer
notch is at the bottom.
Magnet

Step 13.
Connect Front Frame Top Bottom
Bar to Side Frame Front Bar.
DF60 Assembly Guide Top Panel
Bespoke Showcase Engineers
9
Plexiglass
Left Side Panel
Front Frame
Top Bottom Bar
Magnet
Magnet
Safety Pilot Hole
Back Panel
Top Panel
Back Panel
Step 14.
Slide in the Top Panel
between the bars.
Step 15.
Slide in the Right Side Panel.
Please ensure the Side Frame
Front bar Lip is on the right side
of the panel before sliding it down.
Please ensure the
longer notch is facing
the Back Panel.
15mm
M5 Washer
15mm
M5 Washer

Step 17.
Attach the Plexiglass Front Panel
and insert the Safety Screw.
Step 16.
Tilt and insert the
Laminate Base.
Laminate Base
Back Panel
Magnet
Magnet
Magnet
Magnet
Safety Pilot Hole
Plexiglass
Front Panel
DF60 Assembly Guide Front Panel
Bespoke Showcase Engineers
10