URBAN OUTFITTERS NYLA User manual

Assembly Instructions
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 1 of 3
NYLA SHELF
HARDWARE LIST
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips Head Screw Driver
PARTS INCLUDED
(2) Small allen bolt
M6 x 25mm
Quantity: 22pcs
(3) Cross nut
Quantity: 16pcs
(A) Side frame
Quantity: 2pc
(5) Allen key
Quantity: 1pcs
(1) Large allen bolt
M6 x 65mm
Quantity: 16pcs
(B) Front Support
Quantity: 4pc (C) Back support Quantity: 2pc (D) Shelf
Quantity: 4pc
(4) Dowel
M8 x 30mm
Quantity: 12pcs

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 2 of 3
STEP 1.
STEP 2.
A
A
C
C
B
B B
Lay Side frame (A) over onto a clean smooth surface. Align Front support (B) and Back support (C). Insert Dowel
(4) as shown. Insert Cross nut (3) into Back Support (C) and Front Support (B) paying attention to alignment of
cross nut . Insert Large Allen Bolt (1) into drill hole on side frame (A) and tighten with Allen key (5) provided.
Align Shelf (D) with the holes on the underside of shelf to the corresponding holes on the Side frame (A). Then
insert Small Allen Bolt (2) into hole on Side frame (A) and tighten with Allen key (5) provided.
1
D
D
D
D
2
D
5
NYLA SHELF
3
4
5

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 3 of 3
STEP 3.
STEP 4.
Insert Small Allen Bolt (2) into drill hole on Back support (C) and tighten with Allen key (5) provided.
Turn the adjustable feet so it sits flat on the ground.
NYLA SHELF
5
2