modway 6412 User manual

Thank you for purchasing the MODWAY BED!
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step instructions.
2. Owing to the size and weight of the bed, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 35 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save tools that have been provided.
6. Please keep all fitting out of reach of children.
Hardware:
1JCBC BOLT M6 x 20mm 8 PCS
Component:
MOD - 6412
01 of 09
A. HEADBOARD x 1
B. HEADBOARD LEG x 2
C. HEADBOARD SUPPORT WOOD x 2
D. HEADBOARD SUPPORT RAIL x 1
E. x 1
F. SIDE RAIL x 2
G. HEADBOARD WING x 2
H. SIDE RAIL SUPPORT WOOD x 2
I. BED LEG x 4
J. CENTER RAIL x 1
K.
BED SLAT x 26
214 PCS
36 PCS
44 PCS
5M6 SPRING WASHER 8 PCS
6M6 FLAT WASHER 14 PCS
7
WOOD DOWEL M8 x 30mm
10 PCS
8
BED SLAT SIDE FITTER
10 PCS
9
BED SLAT CENTER FITTER
4 PCS
10
M4 ALLEN KEY (BALL SHAPE)
26 PCS
Customer Service 609-256-9000 www.modway.com
JCBC BOLT M6 x 45mm
JCBB BOLT M8 x 40mm
JCBB BOLT M8 x 45mm
M8 SPRING WASHER
M8 FLAT WASHER
13 PCS11
12 WOOD SCREW M3.5 x 16mm 8 PCS
WOOD SCREW M4 x 20mm 2 PCS
13
14
15 M5 ALLEN KEY (BALL SHAPE)
1 PC
1 PC
FOOTBOARD
L.
M.
CENTER SUPPORT LEG x 3
CENTER SUPPORT x 2
B
C
D
E
F
G
H
I
J
K
L
MA

STEP 1
02 of 09
1.1 Attach the Headboard Leg (B) & Headboard Support Wood (C) to the Headboard (A)
using hardware part BOLT (3), BOLT (4),SPRING WASHER (7), FLAT WASHER (8) &
ALLEN KEY (15).
3. JCBB BOLT M8 x 40mm x 4pcs 7. M8 SPRING WASHER x 8pcs 8. M8 FLAT WASHER x 8pcs
Customer Service 609-256-9000 www.modway.com
L
A
B
C
R
BC
A
4
4
3
15
3
7
8
15. ALLEN KEY (BALL SHAPE) M5
4. JCBB BOLT M8 x 45mm x 4pcs
MOD - 6412

STEP 2
03 of 09
3. JCBB BOLT M8 x 40mm x 2pcs 7. M8 SPRING WASHER x 2pcs 8. M8 FLAT WASHER x 2pcs 15. ALLEN KEY (BALL SHAPE) M5
2.1 Attach the Headboard Support Rail (D) to the Headboard (A) using hardware part
BOLT (3),SPRING WASHER (7), FLAT WASHER (8) &ALLEN KEY (15).
Customer Service 609-256-9000 www.modway.com
MOD - 6412
2.2 Loosen the pre-inserted bolt on the Headboard (A) & Footboard (E)
using hardware part ALLEN KEY (15).
A
E
15
15
D
15
3
7
8
STEP 2.1
STEP 2.2

STEP 3
STEP 4
04 of 09
3.1 Attach the Side Rails (F) to the Headboard (A) & Footboard (E)
using hardware part ALLEN KEY (15).
15. ALLEN KEY (BALL SHAPE) M5
Customer Service 609-256-9000 www.modway.com
MOD - 6412
15
A
E
F
F
x 2
4.1 Attach the hardware parts WOOD DOWEL (9) to the Headboard Wing (G).
G
9
9. WOOD DOWEL M8 x 30mm x 4pcs Rubber Mallet

STEP 5
05 of 09
Customer Service 609-256-9000 www.modway.com
STEP 6
MOD - 6412
x 2
5.1 Attach the Headboard Wing (G) to the Headboard (A) using hardware parts
BOLT (2) , FLAT WASHER (6) & ALLEN KEY (14).
14
2
6
2. JCBC BOLT M6 x 45mm x 4pcs 6. M6 FLAT WASHER x 4pcs 14. ALLEN KEY (BALL SHAPE) M4
G
G
A
6.1 Attach the Headboard Wing (G) to the Side Rail (F) using hardware parts
BOLT (2) , FLAT WASHER (6) & ALLEN KEY (14).
2. JCBC BOLT M6 x 45mm x 2pcs 6. M6 FLAT WASHER x 2pcs 14. ALLEN KEY (BALL SHAPE) M4
2
6
14
G
F
F

STEP 7
STEP 8
06 of 09
Customer Service 609-256-9000 www.modway.com
MOD - 6412
8.1 Attach the Bed Leg (I) to the Headboard (A) and Footboard (E) using hardware parts
BOLT (1),SPRING WASHER (5), FLAT WASHER (6) &ALLEN KEY (14).
NOTE :
Make sure the floor is clean and smooth,when put down the bed to prevent scratches.
(Need two men to lift)
1. JCBC BOLT M6 x 20mm x 8pcs 5. M6 SPRING WASHER x 8pcs 6. M6 FLAT WASHER x 8pcs 14. ALLEN KEY (BALL SHAPE) M4
I
A B
156
14
7.1 Attach the Side Rails Support Wood (H) to the Side Rail (F) using hardware parts
BOLT (2) &ALLEN KEY (14).
2. JCBC BOLT M6 x 45mm x 8pcs 14. ALLEN KEY (BALL SHAPE) M4
2
14
H
F
F

9.1 Fasten Center Support Leg (K) to Center Rail (J) attach by screwing the protruding nut
into the corresponding holes.
J
K
STEP 9
STEP 10
07 of 09
Customer Service 609-256-9000 www.modway.com
MOD - 6412
10.2 Locate Center Rail (J) into the corresponding brackets inside of Headboard (A)
and Footboard (E) using hardware parts WOOD SCREW (13) .
10.1 Make sure the sticker "HEADBOARD" faced to Headboard (A)
13. SCREW M4 x 20mm x 2pcs Screw Driver
STEP 10.2 STEP 10.1
J
E
A
J
13

12.1 Insert the Slats (M) into the end SLAT CAP (10) & (11) and fix it to the corresponding
holes on the Side Rail (F) .
10. BED SLAT SIDE FITTER x 26pcs 11. BED SLAT CENTER FITTER x 13pcs
11.1 Insert and secure the Center Support (L) to the Center Rail (J) & Side Rail (F)
using hardware parts WOOD SCREW (12).
STEP 11
STEP 12
08 of 09
Customer Service 609-256-9000 www.modway.com
MOD - 6412
12. SCREW M3.5 x 16mm x 8pcs Screw Driver
F
F
L
J
12
L
Palm
Palm
STEP 12.1
STEP 12.2
M
M
11
10
10
11
M
M
M
10

13.1 Carefully position the assembled bed to the desired location by four adults.
Assembly is complete. The bed is ready to use now!
NOTE: Hardware may loosen over time. Periodically check that all connections are tight.
STEP 13
09 of 09
Customer Service 609-256-9000 www.modway.com
MOD - 6412