modway EEI-1206 User manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 2
EEI -1206 COFFEE TABLE
Hardware:
Component:
A Bolt x16
C Allen Wrench x1
1 Top x1 2 Castor x4
B Flat Washer x16
Thank you for purchasing the GARRISON COFFEE TABLE！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Approximate assembly time: 15 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of small children.
2
1
2
2
2

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 2
EEI -1206 COFFEE TABLE
Ax16 Bx16 Cx1
STEP 1:
Hardware & Tool required
STEP 2:
Assembly is completed. The coffee table is ready to enjoy now!
2
1
1
22
2
2
Please put the Top (1) upside down on a carpeted or padded surface.
Attach one Castor (2) into the bottom of Top (1) by using Bolts (A) and Flat Washers (B) as shown.
Use the Allen Wrench (C) to tighten the Bolts (A) clockwise until secure.
Repeat the same steps for the other three Castors (2).
Carefully turn over the coffee table.