modway EEI-2035 User manual

Customer Service 908-368-1025︱
︱︱
︱www.modwayfurniture.com Page 1 of 3
EEI –2035/2036 TABLE
Hardware:
Component:
A Bolt M6x14mm x 16
B Allen Wrench M6 x 1
1 Table Top x1 3 X Support x1
Thank you for purchasing the MODWAY TABLE!
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of small children.
1
2
2 2 2
3
2 Table Leg x4

Customer Service 908-368-1025︱
︱︱
︱www.modwayfurniture.com Page 2 of 3
EEI –2035/2036 TABLE
STEP 1:
STEP 2:
Put the Table Top (1) upside down on a carpeted or padded area.
Attach one piece of Table Leg (2) to the bottom of Table Top (1) by using 3 piece of Bolt (A) as shown.
Repeat the same steps for the remaining three Table Legs (B).
Use Allen Wrench (B) to tighten the Bolts (A), Do not full tighten the bolts at this step.
1
A
Ax12 Bx1 Hardware & Tool required
Ax4 Bx1 Hardware & Tool required
Attach the X Support (3) to the Table Legs (2) by using 4 piece of Bolt (A) as shown.
Use Allen Wrench (B) to tighten all the Bolts (A) from step 1 and step 2 clockwise until secure.
A
B
2 1
3
3
1
2
2
2
2
A
A
A A
A
A A
2
2 2
2
A
B
2
1

Customer Service 908-368-1025︱
︱︱
︱www.modwayfurniture.com Page 3 of 3
EEI –2035/2036 TABLE
STEP 3:
Assembly is completed. The table is ready to enjoy now!
Carefully turn over the table.