modway EEI-2732 User manual

Customer Service 908-368-1025︱www.modwayfurniture.com Page 1 of 3
EEI –2732/2733 CHAIR
Thank you for purchasing the MODWAY CHAIR！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 15 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components and
hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and
environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all fitting out of reach of children.
Hardware:
A
B Allen Wrench M5 x1
Components:
1 Chair Body x1 2 Leg x4
Bolt M8x25mm x12
1
2
2 2
2

Customer Service 908-368-1025︱www.modwayfurniture.com Page 2 of 3
EEI –2732/2733 CHAIR
STEP 1:
STEP 2:
Please find the package of 4 pieces of Leg (2) on the top of chair seat.
Take out 4 pieces of Leg (2) and hardware from the package as shown.
Hardware & Tools required
1
Ax12 Bx1
Put Chair Body (1) upside down on a carpeted or padded surface.
Make the position for assembling Legs(2) fully visible.
Place 4 pieces of Leg (2) to the bottom of Chair Body (1).
Attach by using 12 pieces of Bolts (A) as shown.
Use Allen Wrench (B) to tighten Bolts (A) clockwise until secure.
2
1
A
A
Package of legs and hardware
Package of legs and hardware = 4 x + hardware
2
2
2
A A
A
A
A
A
A
A
A
A
B
2

Customer Service 908-368-1025︱www.modwayfurniture.com Page 3 of 3
EEI –2732/2733 CHAIR
STEP 3:
Carefully turn over the assembled chair by two adults.
Assembly is complete. Your chair is ready to be used now!