modway EEI-2547 User manual

Chair Back ×1
EEI-2547
Bolt M8×65mm ×8
Spring Washer M8 ×8
Flat Washer M8 ×8
Chair Seat ×1
and then follow the simple step-by-step
f reach of children.

EEI-2547
A×4 B×4 C×4
STEP1:
STEP2:
A×4 B×4 C×4
Legs Package
+
Hardware Package
Please open the Velcro on the bottom of Chair Seat (2).
Insert 1 piece of Front Leg (3) into the bottom of Chair Seat (2) as shown.
Attach by 2 pieces of Bolt (A), 2 pieces of Spring Washer (B), and 2 pieces of Flat Washer (C) as
shown.
Repeat the same steps for another Front Leg (3).
Do not fully tighten Bolts (A) for either leg.
Please put Chair Back (1) upside down on a carpeted or padded area.
Then attach Chair Seat (2) to Chair Back (1) by using 2 pieces of Bolt (A), 2 pieces of Spring
Washer (B), and 2 pieces of Flat Washer (C) for each corner as shown.
Do not fully tighten all Bolts (A).
D×1
D×1

EEI-2547
D×1
STEP3: Carefully turn over the chair.
Please put a heavy object or seat one adult on top of the Chair Seat (2) to pressure the
chair for leveling.
Fully tighten all Bolts (A) with Allen Wrench (D).
STEP4: Recover the Velcro on the bottom of Chair Seat (2).
Assembly is complete.
The chair is ready to use now!