modway EEI-3572 User manual

EEI-3572 TABLE
Customer Service 609-256-9000︱www.modway.com
Page 1 of 3
Thank you for purchasing the MODWAY Table.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Owing to the size and weight of the Table, we recommend that it is assembled by two adults, on a carpeted
or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3. Please do not use any tools other than those provided or recommended in these instructions.
4. Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5. Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of children.
Hardware:
Components:
Bolt M8x45mm x4
Flat Washer x4
1. Top x1 2. Leg x2 3. Stretcher x2
C.
Allen Wrench M8 x1
E.
Bolt M8x20mm x8
B.
A.
Spring Washer x4
D.

EEI-3572 TABLE
Customer Service 609-256-9000︱www.modway.com
Page 2 of 3
STEP 1:
Please put Top (1) upside down on a carpeted or padded surface by two adults.
STEP 2:
1. Attach 1 piece of Leg (2) to the Top (1) by using 2 pieces of Bolts (A) with 2 pieces of Spring Washers (D)
and 2 pieces of Flat Washers (C) as shown.
2. Use Allen Wrench (E) to tighten Bolts (A) as shown.Don’t tight Bolts (A) fully.
3. Repeat the same steps for the other Leg (2). Don’t tight Bolts (A) fully.

EEI-3572 TABLE
Customer Service 609-256-9000︱www.modway.com
Page 3 of 3
STEP 3:
1. Attach 1 piece of Stretcher (3) to 2 sides of Legs (2) by using 4 pieces of Bolts (B) as shown.
2. Use Allen Wrench (E) to tighten Bolts (B) as shown.Don’t tight all Bolts (B) fully.
3. Repeat the same steps for the other Stretcher (3).
4. When two Stretchers (3) are fixed, please fully tighten all Bolts (A) and all Bolts (B).
STEP 4:
Carefully turn over the assembled Top (1) and Legs (2) by two adults.
Assembly is complete. Your Table is ready to enjoy now!