modway 1204 User manual

Hardware:
Component:
A Bolt x4
C Allen Wrench x1
1 Table Top x1 2 Table Base x1
B Flat Washer x4
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of small children.
2
1
COFFEE TABLE
Page 1 of 2
Thank you for purchasing this COFFEE TABLE！
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the table, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 15 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.

Ax4 Bx4 Cx1
STEP 1:
Hardware & Tool required
STEP 2:
Assembly is completed. The coffee table is ready to enjoy now!
Please put the Table Top (1) upside down on a carpeted or padded surface.
Attach Table Base (2) into the bottom of Top (1) by using Bolts (A) and Flat Washers (B) as shown.
Use Allen Wrench (C) to tighten the Bolts (A) clockwise until secure.
Carefully turn over the coffee table.
2
11
2
COFFEE TABLE
Page 2 of 2