modway MOD-6672 User manual

MOD-6672
Component :
1- DRESSER
2- DRESSER LEGS
Page 1/3
Customer Service 908-368-1025 www.modway.com
1
2
Hardware for Dresser
A
B
C
JCBC SCREW M6 x 60MM
SPRING WASHER 1/4''
FLAT WASHER 1/4"
x8
x8
x8
DM4 ALLEN KEY (BALL SHAPE) LONG x1
x4
Anti Tipping Hardware
FWALL SCREW M4 x 18MM x1
GWALL SCREW M4 x 50MM x1
HL-BRACKET x2
KBELT x1
EFELT PROTECTOR
Thank you for purchasing the MODWAY DRESSER!
Before you start, here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the dresser, we recommend that it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.

Place
Place
A x 8 B x 8 C x 8
Hardware & Tool required
STEP 1:
Place Dresser (1) on a carpeted surface. Attach Dresser Legs (2) to the Dresser (1) by inserting JCBC
Screw M6x60mm (A), Spring Washer 1
4'' (B) and Flat Washer 1 4'' (C). Tighten with M4 Allen Key (D).
At last, put the Felt Protector (E) on the soles of Dresser (1) as shown in the picture.
STEP 2:
Page 2/3
D x 1
Customer Service 908-368-1025 www.modway.com
1
D
2
B
C
A
E
E x 4
F x 1 G x 1 H x 2
Hardware & Tool required
MOD-6672
H
F
G
H1x 1x
Attach one of the L-Bracket (H) to the wall by inserting Wall Screw M4x50mm (G). Then attach another
L-Bracket (H) to the backside center of the Dresser (1) by inserting Wall Screw M4x18mm (F).

Place
Place
Hardware & Tool required
Page 3/3
Hardware & Tool required
Customer Service 908-368-1025 www.modway.com
K x 1
MOD-6672
Attach the two L-Bracket (H) with the Belt (K).
K
1x
STEP 3:
STEP 4:
Assembly is complete. The Dresser is ready to be enjoyed now!