modway EEI-3889 User manual

EEI-3889 COFFEE TABLE
Customer Service 609-256-9000︱www.modway.com
Page 1of 3
Thank you for purchasing the MODWAY COFFEE TABLE!
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the coffee table, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
Hardware:
Components:
Bolt M8x25mm x6
A.
Allen Wrench x1
1. Top x1 2. Base x2
C.
Flat Washer M8 x8
D.
Connector x2
B.
Nut M8 x2
E.
Spring Washer M8 x4
F.
Wrench x1
G.
Foot Pin x4
H.

EEI-3889 COFFEE TABLE
Customer Service 609-256-9000︱www.modway.com
Page 2of 3
STEP 1:
1. Please put Top (1) upside down on a carpeted or padded surface.
2. Attach 2 pieces of Bases (2)to the Top (1) by using 4 pieces of Bolts (A) with 4 pieces of
Flat Washers (B) and 4 pieces of Spring Washers (C) as shown.
3. Use Allen Wrench (D) to tighten Bolts (A) as shown. Don’t fully tight Bolts (A).
STEP 2:
1. Attach the 2 pieces of Connecters (G)to the 2 pieces of Bases (2) by using 2 pieces of Bolts (A)
with 4 pieces of Flat Washers (B) and 2 pieces of Nuts (E) as shown.
2. Use Allen Wench (D) and Wench (F) tighten Bolts (A) and Nuts (E) clockwise as shown.
3. When all components are fixed, please fully tighten all Bolts (A).

EEI-3889 COFFEE TABLE
Customer Service 609-256-9000︱www.modway.com
Page 3of 3
STEP 3:
1. Glue 4 pieces of Foot Pins (H) to the 2 pieces of Bases (2) as shown.
STEP 4:
Carefully turn over the assembled coffee table by two adults.
Your coffee table is ready to be used now!