modway EEI-4343 User manual

EEI-4343 Side Table
Customer Service 609-256-9000︱www.modway.com
Page 1of 4
Thank you for purchasing the MODWAY SIDE TABLE.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.Owing to the size and weight of the Side Table, we recommend that it is assembled by two adults, on a
carpeted or padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe
and environmentally friendly way.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten
the components from time to time, so please save the tools that have been provided.
6.Please keep all the pieces out of reach of children.
Components:
1. Table Body ×1 2. Leg ×2 3. Batten ×2

EEI-4343 Side Table
Customer Service 609-256-9000︱www.modway.com
Page 2of 4
STEP 1:
Insert 2 pieces of Wooden Plug (A) into 1 piece of Leg (2) by hand as shown.
Repeat the same step for the other piece of Leg (2).
STEP 2 :
1.Attach 2 pieces of Legs (2) and 2 pieces of Battens (3) together as shown, insert 4 pieces of Bolts (B)
Use Allen Wrench (C) to tighten Bolts (B) as shown .
2.When all Legs are fixed, please fully tighten all Bolts (B).

EEI-4343 Side Table
Customer Service 609-256-9000︱www.modway.com
Page 3of 4
STEP 3 :
Attach assembled Legs (2) and Batten (3) to the Table Body (1) as shown, insert 4 pieces of Bolts (E) and
Use Allen Wrench (D) to tighten Bolts (E) as shown .
STEP 4 :
Carefully turn over the assembled Side Table.
Assembly is complete. Your side table is ready to enjoy now！

EEI-4343 Side Table
Customer Service 609-256-9000︱www.modway.com
Page 4of 4
STEP 5 :
Take the plug out of the hole at the back of the side table and connect it to your home outlet
STEP 6 :
Open the top panel of the side table, the power sockets provides complex elements combined with easier
installation.
-