modway MOD-5244 User manual

A
B
C
D
JCBC SCREW M6 X 40MM
FLAT WASHER 1/4''
SPRING WASHER 1/4''
M4 ALLEN KEY (BALL SHAPE)LONG
F
G
H
I
EBOLT BASE GLIDE M6 x 23(C83)
JCBC SCREW M6 X 35MM
JCBC SCREW M6 X 40MM
SPRING WASHER 1/4''
FLAT WASHER 1/4''
Hardware for Headboard
Hardware for Bed Frame and Legs
Component :
1- HEADBOARD 3- MATTRESS PANEL
2- LEGS 4- WOODEN SUPPORT
Customer Service 908-368-1025 www.modwayfurniture.com Page 1/3
x12
x12
x12
x1
x2
x2
x12
x14
x14
JWOOD DOWEL DIA 8 x 30MM x2
1
3
2
4
Thank you for purchasing the MODWAY BED !
Before you start,here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the bed, we recommed that it is assembled by two adults,on a carpeted or
padded area, in the room that it is intended for.Approx assembly time:30 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or the instruction until you have checked all the components
and hardware and the furniture is fully assembled.Please ensure that the packaging is disposed of in a safe
environmentally friendly way.
5.Assemble all components loosely until advised to tighten.Depending on use, it may be necessary to tighten
the components from time to time,so please save the tools that has been provided.
6.Please keep all fitting out of reach of children.
MOD-5244 / MOD-5238

Place
Place
G x 12 H x 12 D x 1 I x 12
Hardware & Tool required
STEP 1 :
Place Mattress Panel (3) and Legs (2) on a carpeted or padded area as shown. Attach Legs (2) into Mattress Panel L & R (3) by
inserting JCBC SCREW M6 x 40mm(G),Spring Washer 1
4''(H) and Flat washer 1 4'' (I).Tighten with M4 Allen Key (Ball Shape)Long(D).
STEP 2 :
1. Secure the Wooden Support(4) by using Bolt Base Glide M6 x 23(C83)(E).Insert the wooden dowels into the bottom holes
on each side of the Wooden Support(4).
2. Attach Wooden Support(4) first by inserting the other end of the Wooden Dowels(J) into the corresponding holes on the
Mattress Panel (3),and then secure by inserting JCBC Screw M6 x 35mm(F),Spring Washer1
4''(H) and Flat Washer1 4''(I).
Then,tighten with M4 Allen Key(Ball Shape)Long(D).
F x 2 H x 2 DI x 2
Hardware & Tool required
E x 2
Page 2/3
Customer Service 908-368-1025 www.modwayfurniture.com
L
I
H
3
R
2
G
D
4
J
D
F
H
I
E
J x 2
MOD-5244 / MOD-5238

Place
Place
A x 12 C x 12 DB x 12
Hardware & Tool required
STEP 3 :
STEP 4 :
Flip the assembled Mattress Panel(3)over. Place the Headboard(1) on the Mattress Panel L&R(3) and attach them by inserting
JCBC Screw M6 x 40mm(A),Flat Washer1
4''(B) and Spring Washer1 4''.Tighten with M4 Allen Key(Ball Shape)Long(D).
Page 3/3
Customer Service 908-368-1025 www.modwayfurniture.com
1
C
A
D
B
Adjust Level
L
R
E
E
Remark: Do not sit or lie down on the
platform without the mattress
MOD-5244 / MOD-5238
Assembly is complete,the bed is ready to be enjoyed now!