modway EEI-4439 User manual

x 9
x 9
x 18x 14
x 14
Thank you for purchasing the MODWAY CABINET !
Before you start, here are some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2.it is assembled by two adults, on a carpeted or
padded area, in the room that it is intended for. Approximate assembly time: 70 minutes.
3.Please do not use any tools other than those provided or recommended in these instructions.
4.Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the
components from time to time, so please save the tools that have been provided.
6.Please keep all pieces out of reach of children.
Owing to the size and weight of the Cabinet, we recommend that
x 8x 24

21 Support Drawer x1
10 10
11 12
5
1 2 3
67
4
8
9
Front Skirt 2 x1 Front Drawer 1 x1 Front Drawer 2 x1
Side Drawer Right 1 x2
Bottom Board x1 Side Board Left x1 Side Board Right x1 Front Skirt 1 x1
Side Drawer Left 1 x2
10 11 12
Back Drawer 1 x2 Side Drawer Left 2 x1 Side Drawer Right 2 x1
13 Support Drawer 1 x1 14 15 16
Support Drawer 2 x1 Bottom Drawer 1 x2 Back Drawer 2 x1
17 Bottom Drawer 2 x1 18 19 20
Back Skirt 1 x1 Back Skirt 2 x1 Front Skirt 3 x1

x 18
A S
x 2
x 2
8
9
11
12
14
10
11
12 10
10 11

13
14
11 13
14
12 K
10
10

W x 1
6
C x 8
8
9
8
21
9
C x 4
W x 1
17
7
7
7

16

MM
SW x 1
S
A S
Gx16 I x 8

TOP VIEW
U
U
U
U
UU
U U

Determine your desired height (Y),
then subtract by 106 mm.
This is the drill holes height from the
floor (Z).
( Z )
106
( Y ) Exclude height of basin
V
V

Different wall materials require unique wall fasteners.
The wall plugs (P) and screws (L) are designed for fixing to concrete walls only.
Please consult your local hardware store to ensure you are using the correct
hardware for your wall type.
L P
Q
* Long Bracket
group 1 group 2 group 3
Please use minimum 2 holes on group 1 and group 3, and minimum 1
hole on group 2, to apply the wall plug and screw. Use additional holes
when necessary.
Px5 Lx5Qx1
Hardware required.
Screwdriver not included
Wx1
L
Use Waterpass to ensure the drill position
Q

1
2
L
P

Sold Separately
Assembly is complete. The Cabinet is ready to enjoy now !