modway EEI-5083-NAT User manual

EEI-5083-NAT VANITY CABINET
Thank you for purchasing the MODWAY Vanity!
Before you start, here is some helpful advice:
1. We suggest you take SHORT time to read through this leaflet and then follow the simple step-by-step
instructions.
2. Due to the size and weight of the Vanity Cabinet EEI-5083-NAT, we recommend to assembly the leg
by two adults, on a carpeted or padded area, in the room that it is intended for. Approximate
assembly time:30minutes.
3. Please do not use any tools other than those provided or recommendedin theseinstructions.
4. Please do not throw away any of the packaging or instructions until you have checked all the components and
hardware and the furniture is fully assembled.
5. Assemble all components loosely until advised to tighten. Depending on use, it maybe necessary to tighten the
componentsfrom time to time, so please save the tools that have been provided.
6. Please keep all pieces out of reach of children.
Hardware:
ABolt M4x30mmx 4
BScrewdriver ( Not Include ) x 1
EEI-5083-NAT Vanity Cabinet
Customer Service 908-368-1025︱www.modway.com Page 1 of 3
CBrass Handle x 2

EEI-5083-NAT VANITY CABINET
STEP 1:
Please put the foot (2) into the hardware insert nut hole (1) then turn the leg in the right direction and glue it.
STEP 2:
Ensure that the bolt has been inserted into the hole previously drilled in part (1) and attach the brass handle
(C) as shown in the picture and secure it using a screwdriver (B).
Page 2 of 3
Customer Service 908-368-1025︱www.modway.com
2
C
1
2
A
B
Ax4 Bx1 Hardware required. Screwdriver not included
1
A
A
1
2
1
C
A
Insert Nut

EEI-5083-NAT VANITY CABINET
STEP 3:
Assembly is complete
Page 3 of 3
Customer Service 908-368-1025︱www.modway.com