©2023 Moen Incorporated
4. Faults and damages were caused by external factors
such as force majeure;
5.Damages were caused by transportation, unloading
and extrusion, etc.
This warranty is valid for the original consumers only
(including hotel use), and excludes industrial and com-
mercial use of the product (except for hotel use). This
card is only responsible for product maintenance rather
than any other liabilities.
In the event that the product requires maintenance but
exceeds the warranty period, or that the product is not
covered by this warranty, labor cost and material cost
shall be charged as thecase may be.
Please call 400-630-8866 or contact local dealer for any
question.
We offer limited warranty and lifetime maintenance for
Moen products, which are all manufactured with high
standards of workmanship.
The period of warranty shall start from the date of
purchase of the product (according to the invoice or
receipt issued by Moen distributors) and shall cover a
period of the following: the warranty period for bathroom
accessories is 1 year.
This warranty is your coverage against material and
workmanship malfunction or defects in Moen products or
components. During the warranty period, we offer free
main tenance and changing of malfunctioned products or
product components. Moen’s after sales service liability
is limited to the maintenance of faulty items and does not
cover your other losses caused by product malfunction,
except for other wise stipulated by law.
Cosmetic damages (scratches, dents, etc.) and
malfunction or defects caused by abuse or improper
maintenance is not covered by this warranty. Although
the warranty period remains valid, in case of the following
conditions (1) - (5), the maintenance cost (material cost
and labor cost) shall still be charged as the case may be:
1. Corresponding warranty card and valid invoice cannot
be presented;
2. Faults were caused by the incompliance with the
instructions and precautions provided in the user’s
manual;
3. Damages and faults were caused by self-actuated
dismantling, repair and refit;
MOEN LIMITED WARRANTY
PLEASE CONTACT MOEN FIRST
For Installation Help,Missing or Replacement Parts
(China) 400-630-8866
www.moen.cn
CAUTIONS:
Bathroom products are made
with superb technology to ensure high quality,
beautiful and durable.
Be careful when cleaning the product to avoid
damage to the surface of the product.
Please clean the surface of the product with
water or neutral detergent, and then dry it with a
soft towel;
Do not use chemical or corrosive cleaners or
rough cloths.
It is recommended to clean the product regularly
to ensure its appearance is bright and clean.
When using acidic cleaners to clean nearby
items, it may damage the surface of the product.
Please be extra careful.
Drop Ell
Safety Glasses
Screwdriver
Teflon Tape
Flashlight
Pliers
Adjustable Wrench
Pencil
Plumber’s Putty
Saw
Sealant
Tool
Supply line
Mounting Dimensions
Installation steps
R1/2 thread on
supply lines
Supply line recessed behind
finished wall 6-10mm
Finished wall
surface, including
any ceramic tiles
Ø35mm hole
in wall
Teflon tape
Elbow
1. Install the Elbow (use teflon tape).
INS2248C - 6/01
Part List
1 Explosion Screw Pack
2Fting Pack
3Escutcheon
4Elbow
2. Make the Elbow vertical, fix the Fix Platewith Elbow, align it in level
then mark up 2drilling locations in the wall.
4. Fix theFix Plate by screws.
5. Fix theEscutcheon by Set Screws in right direction.
3. Drill 2 Dia. 6mm holes in the marking locationinthe wall, plug Screw
Anchors into holes.
Elbow raisedabove the wall
less than 30mm
Fix plate (pleasenoted the direction)
Elbow
Fix Plate Fix Plate
Fix Plate
Elbow
Elbow
SetScrews Set Screws
Escutcheon
Escutcheon
Screw Anchors
Screws
Fortune Brands Innovations (Shanghai) Co., Ltd
Room 207, Building 4, No.1, Lane 1800, XinyangHighway,
China (Shanghai) Pilot Free Trade Zone
Compliance Certification
Inspector
Product Name
Date of Production
Drop Ell
