Moen MONTICELLO T2524W User manual

Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
MONTICELLO®
Single-Handle Shower Trim Only
Models: T2524, T2524CP, T2524P, T2524W
(Packed 1 per carton)
7"(178mm)
ESCUTCHEON
DIAMETER
HOT
INLET
COLD
INLET
FINISHED WALL LINE
FLOOR
L
C
45"-48"
(1143-1219mm)
8"
(203mm)
MIN.
H/A/F
6' - 6"
(1981mm)
NOMINAL
4-1/2" (114mm)
WALL OPENING
1-7/16" (36mm) MIN.
2-3/16" (55mm) MAX.
15/16"
FLOOR
PLASTER
GROUND
2-3/16"
(55mm)
MAX.
15/16"
PLASTIC
TUB/SHOWER
SURROUND
2-1/16"
(52mm)
REF.
3-1/2" (89mm) MAX.
2" (51mm) MIN.
DIAMETER
WALL OPENING
THIN WALL APPLICATION
THICK WALL APPLICATION
Rev. 6/05
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
ADA
FAUCET DESCRIPTION
• Metal construction with a chrome plated, LifeShine®
polished brass or glacier finish
• 1/2" CC connections
• Includes showerhead, arm and flange
OPERATION
• Pull-on/push-off design
• Lever style handle with optional interchangeable insert
• Allows control of both temperature selection and
volume with a single handle
FLOW
• Showerhead limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
• 1225 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified by CSA to meet CSA B-125,ASME
A112.18.1M and all applicable requirements referenced
therein and complies with the applicable requirements
of ANSI A117.1
WARRANTY
• Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
• 5 year warranty if used in commercial installations