momit Bevel User manual

Installation guide

Index
- What is? .............................................................................................................................................pág 1
- How to use it?....................................................................................................................................pág 1
- momit Bevel Devices ........................................................................................................................pág 1
- Installation .........................................................................................................................................pág 2
- Technical specifiction .......................................................................................................................pág 4

What is momit Bevel?
Is the NEW smart thermostat with which heating can be
control from any mobile device with Bevel App.
Duetoitsintegrateddesignthere’snoneedofanyadditional
device to prioritize the temperature of any chosen room.
Only taking off the thermostat from the magnetized base
and moving it from room to room.
Thanks to its 360º screen it turns around automatically to
show all the information, so it could be placed in any position.
momit Bevel Devices
prioritize the temperature of any chosen room only
taking o the thermostat from the magnetized base.
How to use it?
momit Bevel It can be used in two different ways:
_Placed on the wall to replace an old thermostat
_Separated from the magnetic base to carry from room to room to priori-
tize the temperature.
momit Gateway allows the
thermostat connects to the
Internet.
It shows the status of the
heating system and allows
control it.
BASE
GATEWAY
THERMOSTAT

Before you start you must:
Have Internet connection to perform properly the installation of the
devices.
Download the Bevel App from Google Play or App Store.
1. Install the Gateway, you must connect it to the current through the
micro USB cable and power adapter; as well as the router via ethernet
cable.
2. When the 3 LEDs stop blinking, the Gateway installation will
have been completed successfully.
3. Register your Gateway in the Bevel App, by capturing the QR
code found on the back of the device or manually by entering
the serial number found on the device.
4. Separate both parts, thermostat (A) and base (B).
5. Remove the base lid (B) pressing on its two slots with a
screwdriver, then remove the battery plastic strip.
6. Register the base (B) on the Bevel App and scan the
QR code found on the device or by manually entering the
serial number.
1.
2. 3.
4.
5. 6.
B.
A.

7. If you have a thermostat currently installed, remove it to install the
base (B) in its place.
8. Place the base (B) on the wall and insert the 2 boiler cables through
the lower opening of the base.
9. Fix the base (B) to the wall with screws included in the package.
10. Connect the 2 wires in the 2 inputs. You can place whichever
wire in any of the 2 inputs and then put the base lid (B) back on.
11. Remove the thermostat lid (A) and remove the battery plastic
strip.
12. Register the thermostat (A) on the Bevel App
Now you can place the thermostat (A) over the base (B) or
take the thermostat anywhere you prefer.
11. 12.
8-10

Technical specifications Thermostat
• 2 AA batteries
•Temperature and humidity
sensor
• Temperature precision ±
0.3ºC
•E-Ink Screen
•Radio communication
with Gateway
•Not suitable for outside
usage
• Dimensions:
144,55x80x25,35mm
• Weight: 118g
Base
•2 AA batteries
• Relay:
2A to 30 VDC
0.5A to 125 VAC
• Dimensions:
144,55x80x29,63mm
• Weight: 70g
Gateway
•Input 5V (USB)
•Radio communication
with the thermostat
•Not suitable for outside
usage
• Dimensions:
70x45x20mm
• Weight: 40g

How the thermostat’s LED Wifi works:
Connected to momit server.
Connected to Internet but not to momit server.
Connected to our gateway but not to internet.
There’s no internal connection or the display does not
communicate with the base.
1. Reduce temperature
2. On/Of
3. Increase temperature
4. Indoor temperature
5. Weather forecast
6. Internet conection
7. Batery level
8. Boiler
SCREEN

Green momit 2016®
www.momit.com