momit Smart Thermostat User manual

momit Smart Thermostat
Thermostat installation guide

To open momit ST, introduce the at screwdriver tip in the openings that you ll nd at the bottom of the device.
Press gently pry openings. Realize a hinge movement to nish opening the thermostat housing without forcing the connec-
tion pins.
Opening the case of momit
Remove the back of the case. There you will see positions of the wires market from your heating and / or air conditioning.
You will also see several openings in which the xations of the thermostat will be xed to the wall.

In here you are can identify the wiring diagram marked on the clamps.
C W C2 Y L N
heating A/C power
heating heating A/C
Wiring diagram:
2
2
2

With the help of a screwdriver put the wires in the right position, considering the marks you will see inside the box.
Through the center hole of the back of the case you have to introduce ST momit wires from your previous installation or,
alternatively, those who come preinstalled on a thermostat in your home.
Take the front side of momit ST. You will see that on the top there are two projections which with the rear of the case will
hinge. Place properly and support the rest of the thermostat by pressing it gently. Keep pressing until they the tabs of the
bottom of the case have make a sound a sign that it has engaged properly
Closure of the momit ST