Monitor Audio GSW12 User manual

Set Up Guide
GSW12
All manuals and user guides at all-guides.com
all-guides.com

Key
1
= Auto Timer
AV = Audio Visual
= Caution
EQ = Equaliser Graphic Interface
= Factory Default Setting
= For Advanced Operations only
LFE = Low Frequency Enhancement
= GSW12 Manual Page Reference
Please read all the safety information in the
manual before proceeding to connect and
power up your GSW12
= No
Inp = Stereo
= User Setting
= Volume
= Volume Adjustment
= Yes
= 12v Trigger
Using the AV/
Receiver LFE out
Refer to page 3
Recommend connection
12v DC trigger (if available)
Connecting your GSW12
2
Rear panel view
AV
Stereo
Using a Stereo / 2 Channel
Amplier
Refer to page 5
3
3a
3b
Rear panel view
1
2-9
7 7
All manuals and user guides at all-guides.com

6
EQ FACTORY SETTINGS
NIGHT MODE x 1 = Nigh ON
x 2 = Nigh OFF
x 1 = OFF (STAND BY)
x 2 = ON (POWER UP)
LFE x 1 = Inp (STEREO)
x 2 = LFE (AV)
MUTE x 1 = ON
x 2 = OFF
EXIT
MOVIES x 1 = Movi
x 2 = USER
MUSIC x 1 = Musi
x 2 = USER
IMPACT x 1 = Impa
x 2 = USER
DYNAMIC x 1 = Dyna
x 2 = USER
Graphic Output LevelLFE / Input
EXAMPLE
OR
For Basic Operations
Initial setup - using the 4 factory
pre-sets
5
How to use the factory pre-sets:
DYNAMIC
IMPACT
MUSIC
MOVIES }Factory pre-set EQ settings
Refer to your AV Amplier/Receiver manual to set up the
appropriate crossover settings on your AV/Receiver
EQ Setting
Movies
Music
Impact
Dynamic
User }Level Setting
+
_
4 metres
160o
4
2
10
8
All manuals and user guides at all-guides.com

4. Sub-Sonic
Filter
5. User EQ
Setting
7. Night Mode 8. Phase
10. Auto-OFF
11. Save Data
On/Off Select
0,90,180,270O
Select
5,10,15,20,25
minutes
Save to Flash
memory
4a. Push for
Sub-sonic
FRQ
4b. Turn for
Sub-sonic
Slope
5a. Push for
EQ FRQ
5b. Turn for
EQ Boost
Cut level
Functions & Operations
Advanced Set-up for LFE
Input Connection
Volume
1. Welcome
Screen
Level Up/Down
2. Default Screen
3. Menu Screen
9. 12v Trigger
Overview
LFE
Press
3.
OR
2.
1.
To adjust the User EQ Settings, please ensure you are in the User mode.
Please refer to step in Initial Set-Up Guide. All other Settings can be
adjusted in any of the Factory Pre-set EQ’s.
6
All screens will time out in 7 seconds. No
settings will be lost UNLESS the GSW12
is powered off or put into stand-by mode.
3
4.
4a.
4b.
EXIT
Press
OR
Press
OR
OR
Subsonic
Filter
Frequency
16 Hz
20 Hz
25 Hz
31 Hz
Slope Angle
Flat
6 dB / Oct
12 dB / Oct
18 dB / Oct
24 dB / Oct
30 dB / Oct
36 dB / Oct
42 dB / Oct
48 dB / Oct
54 dB / Oct
5.
EXIT
Press
OR
OR
5a. OR
Press
5b. OR
= 0 dB
6. Preset EQ
10
10
All manuals and user guides at all-guides.com

9.
11.
10.
Information only
6.
7.
EXIT
When in night mode, the display will change from
volume level will be reduced
= OFF
Press
OR
OR
OR
Graphic EQ
Curves
Flat (user before
adjustment)
Movies
Music
Dynamic
Impact
4
11.
Press
OR
OR
8.
EXIT
Press
OR
OR
OR
Phase Shift
(Degrees)
0
90
180
270
EXIT
10.
Press
OR
OR
OR
Time Scales
(Minutes)
5
10
15
25
10
10
7
10
10
factory setting to night setting and the
All manuals and user guides at all-guides.com

8. Night Mode 9. Phase
11. Auto-OFF
12. Save Data
On/Off Select
0,90,180,270O
Select
5,10,15,20,25
minutes
Save to Flash
memory
Volume
1. Welcome
Screen
Level Up/Down
2. Default Screen
3. Menu Screen
10. 12v Trigger
6. User EQ
Setting
5. Sub-Sonic
Filter
5a. Push for
Sub-sonic
FRQ
5b. Turn for
Sub-sonic
Slope
6a. Push for
EQ FRQ
6b. Turn for
EQ Boost
Cut level
7. Preset EQ
LFE
2.
1.
To adjust the User EQ Settings, please ensure you are in the User mode.
Please refer to step in Initial Set-Up Guide. All other Settings can be
adjusted in any of the Factory Pre-set EQ’s.
6
All screens will time out in 7 seconds. No
settings will be lost UNLESS the GSW12
is powered off or put into stand-by mode.
3.
Press
OR
Please refer to step of the
LFE Advanced Set-Up (page 4) to
continue to the next stages of
setting up your GSW12.
4.
5
4.
4a.
4b.
EXIT
Press
OR
Press
OR
OR
Crossover
Frequency
40 Hz
50 Hz
83 Hz
90 Hz
100 Hz
125 Hz
160 Hz
Slope Angle
Flat
6 dB / Oct
12 dB / Oct
18 dB / Oct
24 dB / Oct
30 dB / Oct
36 dB / Oct
42 dB / Oct
48 dB / Oct
54 dB / Oct
4. Crossover
4a. Push for
Low Pass
FRQ
5b. Turn for
Low Pass
Slope
Functions & Operations
Advanced Set-up for Stereo / 2 Channel
Input Connection
Overview
10
All manuals and user guides at all-guides.com
all-guides.com

monitoraudio.co.uk
All manuals and user guides at all-guides.com

®
Monitor Audio Ltd
Unit 2, 24 Brook Road
Rayleigh, Essex
SS6 7XL
England
Tel: [phone]
Fax: [phone]
Email: [e-mail]
www.monitoraudio.co.uk
Designed in the United Kingdom
Version 1
All manuals and user guides at all-guides.com