Monogram Monogram ZVC48L2SS User manual

0
Custom Hood Inserts
Hotte encastrable et adaptable
Manuel du propri_taire
La section frangaise commence 6 la page 11
Campana a medida
Manual del propietado
La secci6n en espafiol empieza en la p6gina 21
I 49-80565 I
10-08JR
monogram.cam

Consumer Information
Custom Hood Insert
Contents Consumer Information
Important Phone Numbers ..................... 9
Model and Serial Numbers ...................... 2
Problem Solver.................................. 8
Safety Instructions .............................. /4
Warranty ...................................... 10
Controls and Features ......................... 5
Care and Cleaning
Light Bulbs...................................... 7
Metal Grease Filters............................. 6
StainlessSteel Hood Surfaces ................... 7
Before
using gour
custom
hood
insert
Readthis manual carefullg. It is intended to help
gou operate and maintain gour new custom hood
insert properlg.
Keep it handg for answers to gour questions.
If gou don't understand something or need more
help, there is a list of toll-free consumer service
numbers included in the back section of this
manual.
OR
Visit our Website at: monogram.com
Write
down the
model &
serial
numbers
You'llfind them on alabel behind the removable
filters.
These numbers are olso on the Consumer Product
Ownership Registration Card packed separatelg
with uour hood.
Visit monogram.com and click on "RegisterYour
Appliance" to register your custom hood insert.
Before sending in this card, please write these
numbers here:
Hodel Number
Serial Number
Usethese numbers in any correspondence or
service calls concerning gour hood.
If gou
received a
damaged
hood
Immediately contact the dealer (or builder) that
sold gou the hood.

Consumer Information
Custom Hood Insert
Save time
&money Before you request service, check the Problem
Solverin the back of this manual. It listscauses of minor operating problems that
you can correct yourself.
If you
need
service
Toobtain service, see the Consumer Servicespage
in the back of this manual.
We're proud of our service and want you to be
pleased. If for some reason you are not happy with
the service you receive,here are some stepsto
follow for further help.
FIRST,contact the people who serviced your
appliance. Explainwhy you are not pleased.
In most cases,this will solve the problem.
NEXT,if you are still not pleased, write all the
details-including your phone number-to:
Hanager, Customer Relations
GEAppliances
Appliance Park
Louisville,KY/40225

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING
SAFETY PRECAUTIONS
.Z_WAR NING-ToREDUCETHERISK
OF FIRE,ELECTRICSHOCKOR INJURYTO
PERSONS,OBSERVETHE FOLLOWING:
A. Use this unit only in the monner intended
by the monufocturer. If you hove questions,
contoct the monufocturer.
B. Before servicing or cleoning unit, switch
power off ot service ponel ond lock the service
disconnecting meons to prevent power from
being switched on occidentolly. When the
service disconnecting meons connot be
locked, securely fosten o prominent worning
device, such os o tog, to the service ponel.
C. Do not use this unit with ony solid-stote speed
control device.
D. This unit must be grounded.
.4LCAUTION-FoR GENERAL
VENTILATINGUSEONLY.DO NOT USETO
EXHAUSTHAZARDOUSOR EXPLOSIVE
MATERIALSAND VAPORS.
-& WAR NING-ToREDUCETHERISK
OF INJURYTO PERSONSIN THE EVENTOFA
RANGETOPGREASEFIRE,OBSERVETHE
FOLLOWING*:
A. SMOTHERFLAMESwith o close-fitting lid,
cookie sheet or metol troy, then turn off the
burner. BECAREFULTOPREVENTBURNS.If the
flumes do not go out immediotely, EVACUATE
AND CALLTHE FIREDEPARTMENT.
B. NEVERPICKUPA FLAMINGPAN--You moy be
burned.
C. DO NOTUSEWATER,including wet dishcloths
or towels-o violent steom explosion will
result.
D. Use on extinguisher ONLYif:
1. You know you hove o ClossABC
extinguisher, ond you olreody know
how to operote it.
2. The fire is smoll ond contoined in the
oreo where it storted.
3. The fire deportment is being coiled.
4. You con fight the fire with your bock
to on exit.
*Bosed on "Kitchen Firesofety Tips" published by
NFPA.
READ AND SAVE
THESE INSTRUCTIONS.
-_ WARNI NG-ToREDUCETHERISK
OFA RANGETOPGREASEFIRE:
A. Never leove surfoce units unottended ot high
settings. Boilovers couse smoking ond greosy
spillovers thot moy ignite. Heot oils slowly on
low or medium settings.
B. Alwoys turn hood ON when cooking ot high
heot or when flomb_ing food (i.e.Crepes
Suzette, Cherries Jubilee, Peppercorn Beef
Flomb_).
C. Clean ventilating fons frequently. Greose
should not be allowed to occumulote on
fon or filter.
D. Use properpon size.Alwoys usecookwore
opproprioteforthesizeofthesurfoce
element.
.4LWARNING-To REDUCETHERISK
OF FIRE,ELECTRICSHOCKOR INJURYTO
PERSONS,OBSERVETHE FOLLOWING:
A. Instollotion work ond electricol wiring must be
done by quolified person(s)in occordonce with
oil opplicoble codes ond stondords, including
fire-reloted construction.
B. Sufficient oir is needed for proper combustion
ond exhousting of goses through the flue
(chimney) of fuel burning equipment to
prevent bock drofting. Follow the heoting
equipment monufocturer's guidelines ond
sofety stondords such os those published by
the Notionol Fire Protection Associotion (NFPA),
ond the Americon Society for Heoting,
Refrigerotion ond Air Conditioning Engineers
(ASHRAE),ond the Iocol code outhorities.
C. When cutting or drilling into woll or ceiling, do
not domoge electricol wiring ond other hidden
utilities.
D. Ducted fons must olwoys be vented to the
outdoors.
-_ WARNING-To REDUCETHE RISK
OF FIRE,USEONLYMETALDUCTWORK.
• Do not ottempt to repoir or reploce ony
port of your hood unless it is specificolly
recommended in this monuol. All other
servicing should be referred to o quolified
technicion.
-4LCAU TI0 N--AUTOMAT,CALLY
OPERATED DEVICE. TO REDUCE THE RISK OF
INJURY, DISCONNECT FROM POWER SUPPLY
BEFORE SERVICING. THE UNIT IS EQUIPPED
WITH AN INTEGRAL DISCONNECTING SWITCH
LOCATED INSIDE THE BLOWER HOUSING.

Controls and Features
Custom Hood Insert
Controls NOTE:Avoid using food products that produce
flames under the range hood.
1o
2o
3o
4o
So
FAN DECREASE ON/OFR Press to turn on and
decrease fan settings. It remembers the last
fan level used. The buttons allow you to cycle
around to the desired setting. (Use to set the fan
speed to LOW, MED, HIGH, BOOST or OFF.)
FAN INCREASE ON/OFR Press to turn on and
increase fan settings. It remembers the last
fan level used. The buttons allow you to cycle
around to the desired setting. (Use to set the fan
speed to LOW, MED, HIGH, BOOST or OFF.)
SENSOR FEATURE--The hood fan will
automatically turn on atthe iVlEDsetting if
cooking temperatures become too hot. The fan
will stag on for a minimum of 3 minutes and will
then turn off when temperatures cool to an
appropriate level.
LIGHT DECREASE ON/OFR Press to turn on
and dim the lights. It remembers the last light
level used. The buttons allow you to cycle
around to the desired setting. (There are four
light levels/settings and OFF.)
LIGHT INCREASE ON/OFR Press to turn on
and brighten the lights. It remembers the last
light level used. The buttons allow you to cycle
around to the desired setting. (There are four
light levels/settings and OFF.)
POWER ON/OFR Press to activate (turn
on)/deactivate (turn off) the control buttons.
When the buttons are active (turned on), their
outer rings will be illuminated. When active
(turned on), the hood lights and fan will
automatically turn on at their lost settings.
NOTES:
• Always deactivate (turn off) the buttons when
the hood is not in use.
• If both the LIGHT and FAN are set to OFF,the
buttons will automatically deactivate (turn off)
after 10 seconds.
O
FAN
12
Monogram°
LIGHT
3 4 5

Careand Cleaning
Custom Hood Insert
For your
safety Before servicing or cleaning the unit, switch
power off at the service panel and lock the service
panel to prevent power from being switched on
accidentally. If the service panel cannot be locked,
fasten a tag or prominent warning label to the
panel.
Metal
grease
filters
The metal filters trap grease released bg foods
on the cooktop. The filters also help prevent flames
(from food, grease)from damaging the inside of the
hood.
Forthis reason, the filters must ALWAYSbe in place
when the hood is used.The grease filters should be
cleaned everg 6 months, or as needed.
To remove:
Support the filter with one hand while pulling down
filter clip with the other. Pullthe filter down and out.
To replace:
1.Tip the filter into the back tab slots and lift up.
2. While maintaining slight upward pressure on
filter,open clip and press into place with two
hands.
Toclean, swish the filter in hot soapg water and
rinse in clean water or wash it in the dishwasher.
Do not use abrasive cleansers.
Clip
\

Careand Cleaning
Custom Hood Insert
Stainless
steel hood
surfaces
Do not use a steel wool pad; it will scratch
the surface.
Toclean the stainless steel surface, usewarm
sudsu water or a stainless steel cleaner or polish.
Always wipe the surface in the direction of the
grain. Follow the cleaner instructions for cleaning
the stainless steel surface.
Toinquire about purchasing stainless steel
appliance cleaner or polish, or to find the location
of a dealer nearest gou, please call our toll-free
number:
National Parts Center 800.626.2002
monogram.com
Light bulbs Tochange the light bulbs:
1. Graspthe outer trim ring and twist until reaching
the unlock position.Then pull the ring straight out.
2. Graspthe bulb and twist until reaching the unlock
position. Then gentlu pull the bulb straight out.
3. Replacewith the same wattage, tgpe and size
bulb.Wear gloves. Do not touch bulb with gour
bare fingers.
These 120 volt, 50 watt halogen bulbs with a
GUIO baseare available at specialty lighting
stores and home building centers.
.Replacethe outer trim ring by inserting the two
retaining tabs into the two tab slots, pressing the
ring flush with the surface of the hood insert and
twisting until reaching the lock position.

Ouestions?
Use this
problem
solver!
The Problem Solver
Custom Hood Insert
PROBLEM
FAN AUTOMATICALLY
TURNS ON AND CAN
NOT BE TURNED OFF
FAN DOES NOT
OPERATE WHEN
TURNED ON
FAN FAILS TO CIRCULATE
AIR OR MOVES AIR
SLOWER THAN NORMAL
FAN KEEPS GOING
OFF AND ON
LIGHT WILL NOT STAY
ON HIGH SETTING
THE HOOD CONTROLS
ARE NOT OPERATING
CORRECTLY
SEQUENTIAL PRESSES
OF THE LIGHT OR FAN
BUTTONS WILL
SOMETIMES CHANGE
THE SETTING FROM THE
LOWEST SETTING-TO OFF-
TO THE HIGHEST SETTING,
OR FROM THE HIGHEST
SETTING-TO OFF-TO THE
LOWEST SETTING
WHEN PRESSING THE
POWER ON/OFF BUTTON
TO TURN ON THE LIGHT,
THE FAN COMES ON
INSTEAD
POSSIBLE CAUSE
The Sensor feature will automaticallg turn the fan on at the
MED setting if cooking temperatures become too hot. The fan
will stag on for a minimum of 3 minutes and will then turn off when
temperatures cool to an appropriate level.
A fuse mag be blown or a circuit breaker tripped. Replace fuse or
reset circuit breaker.
The power disconnect switch inside the hood mag be switched off.
Remove the metal grease filters and flip the switch on.
Check to be sure the metal grease filters are clean. Clean the metal
grease filters (seethe Metal greose filters section). If cleaning
the filters does not correct the problem, call for service.
The motor is probablg overheating and turning itself off. This can
be harmful to the motor. Check to be sure the filters are clean. If off
and on cgcling continues, call for service.
Use 120 volt, S0watt halogen bulbs with a GU10 base and make sure
theg are inserted securelg. Seethe Light bulbs section.
Disconnect power to the hood bg removing the fuse or turning the
circuit breaker off in the home fuse box. Wait 30 seconds to allow the
hood controls to reset and then replace the fuse or move the circuit
breaker back on.
It is normal for the light and fan buttons to cgcle around through the
settings so that gou can easilg set the controls to the desired setting.
For gour convenience, it is normal for the lights and fan to remember
their last setting when gou press the Power On/Off button. If gou
want onlg the lights on, press the "FAN +" (or the "FAN-" ) button until
the fan is off. When gou power the hood up next time, onlg the lights
will function.

Consumer Services
Custom Hood Insert
With the purchase of gour new Monogram appliance,
receive the assurance that if gou ever need information or
assistance from GE, we'll be there. All gou have to do is call--
toll-free!
GE Answer
Center _
800.626.2000
Whotever your question obout ony Monogrom mojor opplionce, GEAnswer Center®informotion
service isovoiloble to help. Your coll-ond your question-will be onswered promptly ond
courteously. GEAnswer Center®service is open 8 a.m. to 10 p.m. ESTMonday - Friday and
8 a.m. to 7 p.m. ESTSaturday.
OR
Visit our Website ot: monogram.cam
Monogram
Preferred
Service
800.444.1845
AGE consumer service professionol will provide expert repoir service, scheduled ot o time thot's
convenient for you. Mony GEConsumer Service compony-operoted Iocotions offer you service
todoy or tomorrow, or ot your convenience (7 o.m. to 10 p.m. ESTMondoy- Fridoy, 8 o.m. to
6 p.m. ESTSoturdoy ond Sundog). Our foctorg-troined technicions know your opplionce inside
ond out-so most repoirs con be hondled in just one visit.
For Customers
With Special
Needs...
800.626.2000
s_c'rloN A._
GEoffers, free of chorge, o brochure to ossist in plonning o borrier-free
kitchen for persons with limited mobility.
Consumers with impoired heoring or speech who hove occess to o TDD
or o conventionol teletypewriter moy coil 800.TDD.GEAC(800.833.4322)
to request informotion or service.
Service
Contracts
800.626.2224
You con hove the secure feeling thot GEConsumer Service will still be there ofter your
worronty expires. Purchose o GEcontroct while your worronty is still in effect ond you'll receive
o substontiol discount. With o multiple-yeor controct, you're ossured of future service ot
todoy's prices.
Parts and
Accessories
800.626.2002
Individuols quolified to service their own opplionces con hove ports or occessories sent directly
to their home. The GE ports system provides occess to over 47,000 ports...ond oil GEGenuine
Renewol Ports ore fully worronted. VISA,MosterCord ond Discover cords ore occepted.
User maintenance instructions contained in this manuel cover procedures intended to be
performed bg eng user. Other servicing generellg should be referred to qualified service
personnel. Caution must be exercised, since improper servicing meg cause unsafe operation.

Warranty
Custom Hood Insert
YOUR MONOGRAM HOOD WARRANTY
Staple sales slip or cancelled check here. Proof of original
purchase date is needed to obtain service under warranty.
WHAT IS
COVERED LIMITED ONE-YEAR WARRANTY
Forone year from date of original purchase, we will provide, free of charge, parts and
service labor in your home to repair or replace any part of the hood that fails because
of a manufacturing defect.
This warranty is extended to the original purchaser and any succeeding owner for products
purchased for ordinary home use in the/48 mainland states, Hawaii and Washington, D.C.
If the product is located in an area where service by a GEAuthorized Servicer is not available,
you may be responsible for a trip charge or you may be required to bring the product to an
Authorized GEService Location for service. In Alaska the warranty is the same except that it
is LIMITEDbecause you must pay to ship the product to the service shop or for the service
technician's travel costs to your home.
All warranty service will be provided by our Factory Service Centers or by our authorized
Customer Care®servicers during normal working hours.
Should your appliance need service, during warranty period or beyond, call 800.444.1845.
Pleasehave your serial number and model number available when calling for service.
WHAT IS NOT
COVERED Service trips to your home to teach you
how to use the product.
Replacement of house fuses or resetting
of circuit breakers.
Incidental or consequential damage
caused bg possible defects with this
appliance.
Replacement of the replaceable filters.
Damage to the product caused bg
accident, fire, floods or acts of God.
Damage caused after deliverg.
•Failure of the product if it is used for
other than its intended purpose or used
commercially.
•Improper installation.
If gou have an installation problem,
contact gour dealer or installer. You are
responsible for providing adequate
electrical, gas, exhausting and other
connecting facilities as described in the
Installation Instructions provided with
the product.
•Product not accessible to provide required
service.
EXCLUSIONOFIMPLIED WARRANTIES--Voursole and exclusive remedy is product repair
as provided in this Limited Warranty. Any implied warranties, including the implied
warranties of merchantability or fitness for a particular purpose, are limited to one
year or the shortest period allowed by law.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation or exclusion may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from state to state.
To know what your legal rights are in your state, consult your local or state consumer affairs
office or your state's Attorney General.
Warrantor: General Electric Compang. Louisville, KY40225
10