Monoprice 33124 User manual

Wireless Smart Water Leak/Flood Sensor
P/N 33124
User's Manual

2
CONTENTS
INTRODUCTION................................................................................................................................................................................................3
FEATURES.............................................................................................................................................................................................................. 3
CUSTOMER SERVICE.................................................................................................................................................................................... 3
PACKAGE CONTENTS.................................................................................................................................................................................4
PRODUCT OVERVIEW.................................................................................................................................................................................5
PHYSICAL INSTALLATION.......................................................................................................................................................................5
APP INSTALLATION AND LOGIN ......................................................................................................................................................6
ADD A DEVICE .................................................................................................................................................................................................. 7
Smart Inclusion Installation ............................................................................................................................................................ 7
AP Mode Installation..........................................................................................................................................................................10
APP FEATURES................................................................................................................................................................................................12
LED INDICATOR STATUS........................................................................................................................................................................13
TECHNICAL SUPPORT...............................................................................................................................................................................13
SPECIFICATIONS............................................................................................................................................................................................14
REGULATORY COMPLIANCE..............................................................................................................................................................15
Notice for FCC ..........................................................................................................................................................................................15
RF Exposure Statement for FCC...............................................................................................................................................15
Notice for Industry Canada...........................................................................................................................................................15
Radio Notice for Industry Canada...........................................................................................................................................16
RF Exposure Statement for Industry Canada ...............................................................................................................16

3
INTRODUCTION
This Wireless Smart Water Leak/Flood Sensor allows you to remotely monitor your home
using your Android™ or iOS® smartphone or tablet. The sensor communicates with your
phone through your local Wi-Fi® network, so you won't need any separate mesh network
hubs or controllers. Be the first to receive instant notifications to your phone whenever a
leak is detected.
FEATURES
Provides simple 24/7 remote monitoring of your home water system
Set push notifications to your mobile devices and be alerted whenever a leak is
detected
Reports battery level and logs events
Detachable probe provides extension to tight or hard to reach areas
Supports scene control and works with other "smart" devices
Works with STITCH by Monoprice smart devices (sold separately)
CUSTOMER SERVICE
The Monoprice Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your
order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-
6pm PT) or via email at [email protected]

4
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice Customer Service for a
replacement.
1x Water/Flood Sensor
1x Mounting Bracket
1x Probe
1x User's Manual
APPLICATIONS
Place the device under sinks, near bathtubs, water heaters, pipes, filters, and anywhere a
leak may be present.

5
PRODUCT OVERVIEW
PHYSICAL INSTALLATION
1. Remove the bracket from the device and place the device directly in areas where a
leak may be present. When water touches the metal sensors located at the bottom
of the unit or on the probe, the device will beep.
2. Attach the bracket if you choose to mount the device at higher locations or on
walls. When the bracket is attached to the device, connect the probe to the bracket
for an extended reach.
3. Use the probe for extended reach in tight spaces or hard to reach areas.

6
APP INSTALLATION AND LOGIN
1. Download and install the free STITCH by Monoprice app from Google Play™ or the
App Store. Scan one of the two QR codes below to go directly to the appropriate
app store.
2. Once it has been installed, launch the app.
3. If you have already used the STITCH app, tap the Login button, then enter your
STITCH account information. If you have not installed and used the STITCH app
before, proceed to app registration. You can register using your phone number or
by using your email address. Follow the on-screen app instructions for more details.
Note that the password must contain 6-20 characters and must include at least one
number.

7
ADD A DEVICE
Smart Inclusion Installation
Smart Inclusion is the default mode for installing your device. It uses your wireless network
to communicate between your smartphone and the smart device. If you do not have a
Wi-Fi® network or do not wish to include the sensor in your network, see the AP Mode
Installation section.
1. Tap +on the Add Devices screen to add a new device.
2. Scroll through the list and select Water Sensor to add your new device to the
STITCH app.

8
3. The LED indicator should be flashing red rapidly, indicating that it is ready to be
paired with your network. Tap Confirm on the app to continue, input the password
to your wireless network, then tap Confirm again.
4. The app will start connecting to the device. Tap Done once it is completed.

9
5. If the device is not flashing red rapidly, twist open the device cover and hold the
Reset button for 5-6 seconds. The LED will flash red rapidly, indicating the device
has been successfully reset.

10
AP Mode Installation
AP mode differs from Smart Inclusion mode in that it does not use your Wi-Fi® network to
manage the communications between your smartphone and the device. Instead, it
connects your phone's Wi-Fi directly to the device's built-in hotspot network.
1. Launch the STITCH by Monoprice app.
2. Tap +on the Add Devices screen to add a new device.
3. Scroll through the list and select Water Sensor to add your new device to the
STITCH app.

11
4. Tap AP Mode at the top right.
5. The LED should be slowly blinking, indicating that it is ready to be added in AP
mode.
6. If it does begin blinking slowly, tap Confirm on the app to continue, input the
password to your wireless network, then tap Confirm again.

12
7. In the wireless settings, select the Stitch-XXXX entry, then tap Connect Now to
continue. The app will begin connecting to the device.
APP FEATURES
Check battery level
Review event history and logs
Set device notifications

13
LED INDICATOR STATUS
LED Activity
Description
Rapidly flashing RED
Smart Inclusion Mode
Slowly flashing RED
AP Mode
LED flashes three time and the alarm rings
three times, then the LED begins rapidly
flashing after flashing once.
Alarm
LED is on for 4 seconds then turns off. After
3 seconds the LED will flash rapidly (first
time reset) or flashes slowly (second time
reset).
Reset
TECHNICAL SUPPORT
Monoprice is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
during regular business hours, 7 days a week. You can also get assistance through email by
sending a message to [e-mail]

14
SPECIFICATIONS
Radio Frequency
2.4GHz
Supported Network Protocols
IEEE802.11 b/g/n
Wireless Range
Up to 147 feet (45m)
Power Source
1x CR2 battery
Standby Current
10µA
Battery Life
Up to 5 years in standby, up to 4 years
when triggered twice each month
Ingress Rating
IP67
Buoyancy
Supported
Operating Temperature
+32 ~ +104°F (0 ~ +40°C)
Storage Temperature
+32 ~ +140°F (0 ~ +60°C)
Storage Humidity
0 ~ 90% RH, non-condensing
Sensor Dimensions
ø2.6" x 1.0" (ø67 x 24 mm)
Probe Length
About 3.8 feet (115.8 cm)

15
REGULATORY COMPLIANCE
Notice for FCC
Modifying the equipment without Monoprice’s authorization may result in the equipment
no longer complying with FCC requirements for Class A digital devices. In that event, your
right to use the equipment may be limited by FCC regulations, and you may be required to
correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a commercial installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his own
expense.
RF Exposure Statement for FCC
Caution
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must be at least 20 cm from the user and must not
be collocated or operated in conjunction with any other antenna or transmitter.
Notice for Industry Canada
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

16
Radio Notice for Industry Canada
Caution
This IC RSS-210 radio device operates on a non-interference basis with other devices
operating at this frequency. Any changes or modification to said product not expressly
approved by Monoprice, including the use of non-approved antennas, could void the user’s
authority to operate this device.
This device complies with IC RSS-210. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
RF Exposure Statement for Industry Canada
Caution
This equipment complies with radiation exposure limits set forth for an uncontrolled
environment. End users must follow the specific operating instructions for satisfying RF
exposure compliance. This transmitter must be at least 20 cm from the user and must not
be collocated or operated in conjunction with any other antenna or transmitter.
Android™ and Google Play™ are trademarks of Google LLC.
Cisco® and IOS® are registered trademarks or trademarks of Cisco Systems, Inc. and/or its
affiliates in the United States and certain other countries.
Wi-Fi® is a registered trademark of Wi-Fi Alliance.