Monoprice 43795 User manual

3-in-1 Magnetic Wireless Charging Stand
P/N 43795
User's Manual

2
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these
safety warnings and guidelines. Please keep this manual in a safe place for future reference.
•This device is intended for indoor use only.
•Do not expose this device to water or moisture of any kind. Do not place drinks or
other containers with moisture on or near the device. If moisture does get in or on
the device, immediately remove it from its power source and allow it to fully dry
before reapplying power.
•Do not expose this device to excessive vibration or extreme force, shock, or
fluctuations in temperature or humidity.
•Do not expose this device to excessively high temperatures. Do not place it in, on,
or near a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in
direct sunlight.
•Do not place or install this device in an area where it can be exposed to excessive
amounts of dust, humidity, oil, smoke, or combustible vapors.
•Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or
detergents. For stubborn deposits, moisten the cloth with warm water.
•This device has no user serviceable parts. Do not attempt to open, service, or
modify this device.

3
INTRODUCTION
This 3-in-1 Magnetic Wireless Charging Stand allows you to simultaneously charge an
iPhone® 12 or iPhone 13, an Apple Watch®, and a pair of AirPods®. It features a small
footprint to save desk space and requires only a single USB power source. The Charging
Stand uses the Qi® wireless charging standard.
CUSTOMER SERVICE
The Monoprice™ Customer Service department is dedicated to ensuring that your ordering,
purchasing, and delivery experience is second to none. If you have any problem with your
order, please give us an opportunity to make it right. You can contact a Monoprice
Customer Service representative through the Live Chat link on our website
www.monoprice.com or via email at [e-mail]. Check the website for
support times and links.
PACKAGE CONTENTS
Please take an inventory of the package contents to ensure you have all the items listed
below. If anything is missing or damaged, please contact Monoprice™ Customer Service for
a replacement.
1x 3-in-1 Magnetic Wireless Charging Stand
1x USB Charging Cable (Type-A to Type-C®)
1x USB Wall Charger with Qualcomm® Quick Charge™ 3.0

4
PRODUCT OVERVIEW
ASSEMBLY AND OPERATION
1. Insert the T-Shaped Bracket into the base at an angle
of 45°.

5
2. Slide the Wireless Charging Area onto the T-Shaped
Bracket.
3. Insert the Apple Watch® charging pad into the circular
opening, then insert the charging cable into the
groove on the back of the T-Shaped Bracket.
4. Pass the USB Type-A connector on the Apple Watch
through the hole.

6
5. Coil the Apple Watch® cable into a loop.
6. Insert the looped cable into the opening on the base.
7. Plug the USB Type-A connector on the Apple Watch
cable into the USB port inside the base.

7
8. Slide the cover into place on the base.
9. Plug one end of the included USB Charging Cable into the USB Type-C® port on the
rear of the base, then plug it into the included USB charger. For best results, the
power source should have a variable output power of at least 5 VDC/3A or 9
VDC/2A or 12 VDC/1.5A.
10. You can now charge your
iPhone® 12, iPhone 13, or another
phone with a magnetic case and
Qi® wireless charging by placing
it on the Magnetic Wireless
Charging Area. Charge your
Apple Watch® by placing it on
the Magnetic Apple Watch
Charging Pad. Charge your
AirPods® by placing them in the case and then placing the case on the Charging
Area on the base. Alternatively, you can charge a phone with Qi wireless charging
by placing it on the Charging Area on the base.

8
LED INDICATIONS
Condition
LED Indication
Standby Mode
LED off
Charging Complete
LED off
Power On
Green LED for 3 seconds
Charging in Progress
Solid green
Foreign object on charging area
Flashing green
COMPATIBLE DEVICES
The following devices are known to be compatible with the 3-in-1 Magnetic Wireless
Charging Stand. Other devices may be compatible. Newer devices from the named brands
will most like be compatible. Note that any device with USB charging can be charged when
plugged into the USB port on the Charging Stand.
Phones
Apple: iPhone® 12, iPhone 13, any other phone with Qi® wireless charging
Watches
Apple: Apple Watch® series 7, Apple Watch series 6, Apple Watch series SE, Apple Watch
series 5, Apple Watch series 4, Apple Watch series 3, Apple Watch series 2
Earphones
Apple: AirPods® Pro, AirPods 3, AirPods 2, AirPods 1

9
TECHNICAL SUPPORT
Monoprice™ is pleased to provide free, live, online technical support to assist you with any
questions you may have about installation, setup, troubleshooting, or product
recommendations. If you ever need assistance with your new product, please come online
to talk to one of our friendly and knowledgeable Tech Support Associates. Technical
support is available through the online chat button on our website www.monoprice.com
or through email by sending a message to [e-mail]. Check the website for
support times and links.
To download the latest drivers, firmware, manuals, etc., go to www.monoprice.com and
type the P/N into the search bar. If available, support files are linked at the bottom of the
product page.
SPECIFICATIONS
P/N
43795
Input Connection
USB Type-C®
Input Power
5 VDC, 3A or 9 VDC, 3A or 12 VDC, 3A
Phone Output Power
5 ~ 15 W
Apple Watch® Output Power
2.5W
AirPods® Output Power
2.5W

10
REGULATORY COMPLIANCE
Notice for FCC
FCC ID: 2AUJH-Q820
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
Modifying the equipment without Monoprice's authorization may result in the equipment
no longer complying with FCC requirements for Class B digital devices. In that event, your
right to use the equipment may be limited by FCC regulations, and you may be required to
correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.

11
Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.
Apple®, Apple Watch®, AirPods®, and iPhone® are trademarks of Apple Inc., registered in
the U.S. and other countries.
Qi® and the Qi symbol are trademarks of the Wireless Power Consortium.
USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.
Qualcomm® is a trademark of Qualcomm Incorporated, registered in the United States and
other countries. Qualcomm® Quick Charge™ and the Quick Charge logo are trademarks of
Qualcomm Technologies International, Ltd., registered in the United States and other
countries. Qualcomm® Quick Charge™ is a product of Qualcomm Technologies
International, Ltd.