Monoprice HDX-401E User manual

HDX-401E
INTRODUCTION
The HDMI Switch is with a remote control for easy switching within four digital
video sources. It allows four HDMI devices to one HDMI display that is a convenient
way of arranging the HDMI devices.
In addition, the HDMI SWITCH can help end-user to connect more digital devices
such as DVD player, PS3, Digicamf or Handcam.
FEATURES
• Compliant to HDMI 1.3a Category "Repeater" specification HDMI 1.3b
• Supports all resolutions including 1080p
• Supports bandwidth requirements up to 6.75Gbps(225MHz)
• Supports up to 36-bit color
• Compatible with HDCP compliant devices
SPECIFICATION
Function:
S p.ecif i cation'
PACKAGE CONTENTS
• 1 x HDMI 4x1 Switch
• 1 x DC 5V# 1.0A power adapter
• 1 x IR remote control
• 1 x User manual

INSTALLATION
Direct
input select
Next/Previous
input select
ON/OFF
+SVIN HDMI Out HDMI 4 HDMI 3 HDMI 2 HDMI 1
Input indication IR Receiver Power Input Select button
User Manual
Connect the HDMI cables from the HDMI source devices to the HDMI switch inputs.
Connect the HDMI cable from your display ( monitor or projector ) into the HDMI
switch output.
Plug the 5V DC power supply into the HDMI switch.
Select the desired input as follows:
® From the switch front panel-
Press the "Input Select" button repeatedly until the desired input is selected.
To switch off HDMI switch, press "Input Select" button on HDMI switch panel for 4
seconds. To switch on, simply press "Input Select" button.
<§> From the remote control-
1. Open remote control cover and the batteries package
2. Install the batteries into the remote control
3. Press the desired input button to go directly to the desired input (1-2-3-4 ) • or
4. Press the "< " or " ► " button to select the previous / next input.