Monster iCarPlay Wireless 1000 Instruction Manual

iCarPlay® Wireless 1000
Car Stereo FM Transmitter/Charger
User Guide &Warranty
Information

iCarPlay® Wireless 1000 Features
• High-quality stereo audio
• Full range of FM stations, from 88.1 to 107.9
• 3 "favorite station" programmable presets
• AutoScan 3Dn" automatically finds best FM frequency*
• Charges iPod® and iPhonen"
• Can charge other USB devices
• Powered by 12V car cigarette lighter adapter
• Dielectric cable insulation reduces interference
• Line-level audio reduces distortion
• 3D-ft. maximum range
* Depending on variable environmental factors
INSTRUCTIONS
Connecting to iPod or iPhone and Car
1. Plug the iCarPlay Wireless 1000 power adapter into
your car's 12V accessory outlet (cigarette lighter
socket) and turn your iPod or iPhone on.
~
e"" ~
'-'-', ( ..... 1
Note: Illustrations may vary in appearance from actual product.

2. Press the "M" button again to tune up, or
press the middle "D" button to tune down .
t@j
Manual Tuning
1. Press and hold the top button
labeled" M" (for manual) until
the LCD display flashes.
~
..
II" --II
t \
=
~
I ,
@
2. Plug the iCarPlay Wireless 1000 dock connector unit
into your iPod or iPhone. The LCD screen will light
up to confirm power reception and display the most
recently used station preset.

3. Press the 1/ S 1/ button to set the channel.
~ ~
@
Press SButton
~- to Set the Channel
4. Tune your FM radio to the same channel.
5. To avoid unwanted sudden loud playback, set car
audio system volume to low before pressing play.
6. Press the 1/ Play" button on your iPod or iPhone.
7. Use your car radio's volume knob to adjust
sound level.

Selecting Memory Presets
Each of the three buttons on the iCarPlay Wireless 1000
can be used to store and instantly recall a stored channel.
First, tune to the channel you want to store to memory.
Now press and hold the button that you want to program
until the screen flashes and displays Pl, P2, or P3. The
channel is now set to memory for automatic recall.
NOTE: After using
AutoScan 3D, the
selected frequency
will automatically
be stored to the 1/ S"
button's memory for
instant recall.
1J
@
Press and Hold
\' __ .. '~ any Button to
Set Memory
~ &Preset
Selecting Memory Presets
Simply press any of the three buttons and the iCarPlay
Wireless 1000 will tune to the channel that you have
stored in memory.
lI
@
Press any Button
to select
Memory
Preset

Using AutoScan 3D™ Automatic
FM Frequency Selection (recommended)
The iCarPlay Wireless 1000 features Aut05can 3D to
automatically find the best, clearest FM channel in your
local area. Remember that as you drive through different
areas the FM signal conditions change, so when driving
long distances, you can repeat the Aut05can 3D
selection whenever FM interference occurs.
1. Press and hold the bottom" 5" (scan) button until the
LCD screen begins scanning. The iCarPlay Wireless
1000 will rapidly scan the entire FM spectrum three
times, to ensure the best possible signal~ The LCD
will then display the frequency that Aut05can 3D
has selected. Tune your car radio to that frequency.
NOTE: After using Aut05can 3D, the selected
frequency will be automatically stored to the
"5" button's memory for instant recall.
.. Depending on variable environmental factors
,
IlL \\\1
-@
Hold Down
"'.- the 5 Button
to Begin
AutoScan 3D
2. Tune your FM radio to the same channel.
LCD Screen Timer Settings
Press and hold the D (display) button to change the
LCD illumination between Auto-Off, which will turn the
display off after a few seconds, and ON which leaves
the display on until the unit is unplugged.

Charging Other USB Devices in the Car
The iCarPlay Wireless 1000 power adapter can also
function as a car charger for almost any USB 2.0
device such as a cell phone, camera, or MP3 player.
1. Disconnect the iCarPlay Wireless 1000 transmitter
from the power adapter by removing the USB cable.
2. Plug power adapter into your car's cigarette lighter.
3. Insert your USB device's USB cable into power
adapter's USB port, and connect your device
to the other end of the USB cable.
NOTE: Some USB 2.0 devices will not properly
charge with a generic USB cable. You may need
to use the USB cable that originally came with
your device to ensure proper voltage regulation
and device authentication. Charging may not
$
begin automatically, you may need to activate
charging mode on your USB device. Refer to the
manufacturer's instruction manual.
Alternative Home/Office Use
You can also listen to iPod or iPhone music with the
iCarPlay Wireless 1000 outside of the car, in your
home, office, or wherever there is a device with a USB
2.0 port for power and a nearby FM radio to receive
the signal. Disconnect the iCarPlay Wireless 1000
transmitter from the power adapter by removing
the USB Cable.
1. Insert the iCarPlay Wireless 1000 transmitter's USB
cable into a USB 2.0 compliant port. USB 2.0
ports are commonly found on laptop and desktop
computers, newer DVD players, HDTVs, and other
electronics, such as the Monster iCharger® Travel.

2. Connect iPod or iPhone to the iCarPlay Wireless
1000 and tune manually or with AutoScan 3D
as previously described.
3. Tune a nearby FM radio (AV receiver, clock radio) to
the channel displayed on the iCarPlay Wireless 1000.
4. Press play on iPod or iPhone, and adjust volume
on FM radio.
NOTE: You may need to adjust the location of
the iCarPlay Wireless 1000 closer to the FM radio
for clear reception.
t
J
/I

Performance &Safety Tips:
• Connect iCarPlay Wireless 1000 and select channels BEFORE
operating your vehicle; never while driving.
• For best performance, select an iCarPlay Wireless
1000 channel that is not occupied by a strong local
FM radio station.
• AutoScan 3D can find the channel that offers clearest sound
with the least interference automatically. Remember that
signal conditions change as your car moves, and re-scanning
may be necessary.
• Certain car radios may experience more difficulty receiving
clear signals than others. Location of the antenna can affect
signal strength. Some vehicles have a metallic film in the
windows that can also make it harder to receive clear
signals from the iCarPlay Wireless 1000.
• In dense metropolitan areas, there are cases where all iCarPlay
Wireless 1000 pre-set stations are occupied by local radio
stations. Sometimes a station setting next to a local station
may be strong enough to 'bleed' over to the adjacent
frequencies. Use manual tuning to eliminate interference.
• Radio frequencies from local stations can 'bounce' from hills
and buildings and may cause momentary interference.
• A steel bridge or parking garage may act like an antenna,
strengthening local and distant radio station signals. You
may need to wait until you are /I over the bridge /I or /I out
ofthe structure /I for clearest reception.
• The iCarPlay Wireless 1000 transmitter strength is regulated
and limited by the FCC. iCarPlay Wireless 1000 transmits at
the power allowable by law.
• iCarPlay Wireless 1000 is designed to transmit within your
car's perimeter while not interfering with the surrounding
public airwaves.
Note: Illustrations may vary in appearance from
actual product.

FCC Notice: This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Caution: Changes or modifications not expressly approved
by Monster Cable Produds, Inc. may void the users authority
to operate this device.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by tuning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radiolTV technician for help
FCC ID : RJE 190075-00
LIMITED WARRANTY FOR CONSUMERS
Monster Cable Products, Inc., 455 Valley Drive, Brisbane, CA
94005, USA, [phone] ("Monster") extends You this
Limited Warranty Statutory or common law may provide You
with additional rights or remedies, which shall not be affected
by this Limited Warranty
DEFINITIONS
"Adequate Use" means use of the Product (i) within a home or
dwelling, (ii) for private (as opposed to commercial) purposes, (iii) in
conformance with all applicable local, state or federal law, code or
regulations (including without limitation building and/or electrical
codes), (iv) in accordance with manufadurer recommendations and/