Monster iCruze MPC FX IC-AUD1 Operation manual

ICRUZE INTERFACE CABLE
MPC FX IC-AUD1
INSTALLATION & USER GUIDE

IMPORTANT NOTE:
This cable and/or module is for use in installations
that typically have a CD changer installed from
the factory or are prewired for one in a non-dash
location. It is a complicated installation
and professional installation is HIGHLY
recommended.
The installation of iCruze® will disconnect
and cease the normal operation and function
of the factory-installed CD changer, satellite
radio, and/or DVD entertainment systems.
This Interface Cable is designed to work with
Monster® Factory•Linx™ Interface Module IM-VW1.
Make certain you have purchased this Interface
Module and Extension Cable or your iCruze
installation will not function.
The Monster Factory•Linx Interface Cable(s)
and/or Module(s) enclosed are custom designed
for your particular vehicle. Because every vehicle
is different, unique adaptors are required to make
your iCruze installation and operation function
exactly as it was designed. Each is designed
and tested to fit correctly and made from the top
quality materials for trouble-free operation.

A NOTE FROM THE HEAD MONSTER
Thank you for purchasing the Monster
Factory•Linx™ iCruze®—one of the most exciting
products Monster has ever offered. Monster
worked closely with the engineers at Apple
to design iCruze to give you the most reliable,
most complete control of your iPod® through
your factory car stereo. iCruze also gives
you a direct connection for crystal clear
sound quality. And it charges your iPod
the entire time you’re driving, so when
you leave the car your iPod is charged up
and ready to go. You’ll soon be wondering
how you ever got along without your iPod
and iCruze in your car.
When you put music, driving and iPod
together, Life is Good.
Monsterously,
Noel Lee,
The Head Monster
Noel Lee,
The Head Monster

LOSS OF CERTAIN EXISTING FUNCTIONS
Use and installation of iCruze® requires disconnection and loss
of use of any existing factory installed non-integrated CD-changer
(i.e. trunk, center console, under seat).
iCruze is not compatible with some vehicles that have existing,
factory installed integrated CD changers. Typically this is an in-dash
CD changer. Call your dealer and ask if your factory stereo has a CD
or CD changer port/option on the rear of the stereo. If yes,
then it is iCruze compatible.
Existing factory installed vehicle features, such as Satellite Radio,
DVD entertainment systems, navigation systems and video cameras
may be impacted by or cease to function with use and installation
of iCruze, if these components were connected to the CD changer
port. Check the iCruze in-store selection guide, visit iPodiCruze.com,
or call customer service at 1-415-840-2000 (9am–5pm Monday
through Friday PT) for more details.
INSTALLATION SAFETY PRECAUTIONS & WARNINGS
Monster is not responsible for any damage to your vehicle while
installing iCruze. The wiring and installation of the iCruze requires
technical skill. Monster recommends iCruze installation by a MECP
certified professional car audio technician. If you choose to install
yourself, be aware that specialized car stereo removal tools
may be needed and can be found available for purchase
on our website iPodiCruze.com.
Make sure you have purchased the correct Monster Factory•Linx
Interface Cable and/or Module. See the iCruze Factory•Linx
in-store selection guide or visit iPodiCruze.com to ensure you have
everything you need to install iCruze in your car. Double check

the iCruze in-store selection guide, visit iPodiCruze.com,
or call customer service at 1-415-840-2000 (9am–5pm
Monday through Friday PT) for more details.
If your factory stereo is protected by an anti-theft code,
have the code available so you can use your stereo once
re-connected. Consult your car owner’s manual or contact
your local car dealer for more information.
Before installing iCruze, remove the cable from the negative
battery terminal. Failure to do so may cause electrical shock
and/or injury.
iCruze is designed to be installed in the dash near the car stereo.
Installation elsewhere or in a dusty or moist area may cause
problems or product failure.
Many connectors in your car may look the same. Do not force
or alter the cable connectors to fit. Failure to do so may damage
your vehicle’s electronics, cause shock or fire.
While installing iCruze, make sure to avoid sharp edges which
can damage wiring. Failure in doing so may cause iCruze
to not work or result in a fire.
Do not attempt to take iCruze apart. The internal circuits
are static sensitive and contain no user serviceable parts.
IMPORTANT iPOD® FUNCTION NOTES & SAFETY
Monster is not responsible for any lost data on your iPod®
even during normal use of this product.
Monster is not responsible for damage caused to your iPod
from misuse.

iCruze® is compatible with iPod® models with dock connector.
You should never leave or store your iPod in your vehicle
for an extended amount of time. Failure to do so may damage
your iPod from heat, cold and moisture extremes. See your iPod
manual for acceptable temperature ranges.
For added safety and security while driving, Monster recommends
placing the iPod in your glove box or other stow-away location
such as a center console.
Your iPod must have certain firmware for proper iCruze
compatibility. Minimum Version 1.2 for iPod Mini, version 1.0
for iPod Photo, iPod Nano, and iPod Video and version 2.2 for iPod.
Visit apple.com/support for more information.
When you unplug the iPod from the iCruze, you will notice that
the iPod will display the iCruze logo for a short time which is normal.
It will revert back to the usual screen shortly after this time period.
The functions and control of your iPod may differ depending
on your radio. iCruze is limited by the available functions of your
radio. I.E.- If your radio does not have a shuffle/random this feature
will not be available.
iCruze utilizes playlists on your iPod to access music. Be sure
to refer to your installation and user guide that came with iCruze
for more details on how to optimize your playlist for use with
the main iCruze unit.
iCruze is not compatible with Bose audio systems. If your AUDI
says Bose on the stereo or any of the speaker covers,
iCruze is not compatible.

INCLUDED ITEMS
(1) Monster Performance
Car™ Factory•Linx™
iCruze® Interface Cable
Part #151465 for certain
1998-2003 Audi®
BEFORE YOU BEGIN
The IC-AUD1 Cable ONLY works with the IM-VW1 module
(sold separately). Discard the IM-VW1 instructions
and use these only.
Because iCruze emulates a CD changer, if your vehicle currently has
a CD changer installed, it will need to be unplugged for the iCruze
to operate. Should you experience a problem, please call Customer
Service at 1-415-840-2000 (9am–5pm Monday through Friday PT)
to report it.
IMPORTANT: Please completely read and review the installation
guide that came with iCruze BEFORE you begin this installation
for steps required prior to Interface Cable installation.

Installation Diagram/ Location Overview
















INSTALLATION
Review the installation guide that came with the main iCruze® Unit.
WARNING:
IF YOU HAVE NOT ALREADY DISCONNECTED THE NEGATIVE
TERMINAL OF THE BATTERY, DO SO NOW.
Step 1
Get the Interface Cable from the main iCruze package. The yellow
wire needs to be connected to constant, unswitched power.
This should be available from the car stereo wire harness.
Consult your car’s factory service manual for the location of this wire.
An MECP certified installation professional can also help.
To prevent cutting the car’s wire harness, a T-Tap type connector
is recommended (be certain to use the proper size T-Tap to ensure
a reliable connection).

Step 2
WARNING:
DO NOT ATTEMPT TO MAKE THIS CONNECTION UNLESS
YOU HAVE THE EXPERIENCE AND KNOWLEDGE TO DO SO.
INCORRECT CONNECTIONS MAY CAUSE MALFUNCTION OF CAR
STEREO AND OTHER ELECTRICAL SYSTEM COMPONENTS.
CONSULT AN MECP CERTIFIED INSTALLER IF YOU DO NOT HAVE
THE TOOLS OR KNOWLEDGE TO MAKE THIS CONNECTION.
Connect the free end of the yellow wire to constant power.
Step 3
The blue with white stripe wire
goes between both ends of the cable.
In the middle is a connector that comes
apart. Pull the ends to disconnect them.
The female end is not used and can be
left alone.
Step 4
Cut off the male “bullet” end and
connect this to 12-volt accessory power.
Step 5
The other cable interfaces included
in Interface Module IM-VW1 will not
be used. Use the Interface Cable
IC-AUD1 and remove the cable inside.
Interface Cable IC-AUD1 has a loose
Step 3
Step 5