moonboon Spring for Baby Hammock User manual

1
Brugermanual
Moonboon slyngevugge 1
User Manual
Spring for Baby Hammock
User manual
Important: Read the user manual carefully
and keep it for future use.
Spring for Baby Hammock

2
Brugermanual
Moonboon slyngevugge 2
User Manual
Spring for Baby Hammock
The Moonboon baby hammock spring is designed for use with the
Moonboon hammock. The spring is compatible with the Moonboon
hammock motor.
User Manual
1 spring with safety strap and swivel snap hook
1 cotton cover
1 safety snap hook with plastic parts
1 extra plastic part
What is included?

3
Brugermanual
Moonboon slyngevugge 3
User Manual
Spring for Baby Hammock
Assembly
First see to the mounting: ceiling hook, door frame clamp, or tripod stand.
Place the cover around the spring. Tie the cover with a bow in the top
and bottom and stretch out the spring by pulling in each end to spread
the cover out evenly.
The spring comes with 1 extra plastic part. This plastic part prevents the
metal parts of the hammock from grinding against each other. Before
hanging the spring, attach the plastic part to the swivel snap hook, as
shown in the illustration on the right. Ensure that the plastic part click
audibly into place.
Hang the spring using the snap hook provided in the package. Note that
the spring swivel snap hook must point down as shown in the illustration.
3
2
1
3
2

4
Brugermanual
Moonboon slyngevugge 4
User Manual
Spring for Baby Hammock
• The spring will hold newborns and children up to 15 kg (33 lbs). Never
place a child heavier than 15 kg (33 lbs) in the baby hammock.
• Always hang the baby hammock and spring in a closed hook and
system. Always check that the carabiners are locked properly.
• Never use the spring without the safety strap.
• The child is never to be left in the hammock without supervision.
• Do not use the spring for any other purpose than to operate a baby
hammock.
Safety Checklist