moonboon Tripod stand for baby hamoock User manual

1
Brugermanual
Moonboon slyngevugge 1
User manual
Tripod stand for
baby hammock
User manual
Important: Read the user manual thoroughly and
keep the manual for future use.
Tripod stand for baby hammock

2
Brugermanual
Moonboon slyngevugge 2
User manual
Tripod stand for
baby hammock
What is included?
1 top assembly
6 connecting leg pipes
3 connecting leg pipes with nished ends (“feet”)
The stand is designed to hold a hammock or a hammock with a
motor. The stand will hold a maximum of 15 kg (33 lbs).
The stand is easily assembled, and no tools are needed.
Start by twisting together the legs. Each leg consists of 3 pipes. The
lower one is the one with a “foot”. Ensure that the pipes are rmly
twisted together.
Now attach the 3 legs to the top assembly. Ensure that each leg is
rmly twisted into the top assembly.
Adjust the “feet” so that they point outward from the stand and stand
rmly on the oor. Place the legs as far apart as possible to achieve the
maximum balance.
Now hang the hammock and, if applicable, the motor, on the stand.
See the next section for details.
3
2
1
The stand may only be placed
on a at oor. Maximal permitted
slope of the oor is 0.15 degrees.
Requirements for atness are
max. 2 mm (1/16 inch) measured
at 2 meters (6.5 feet).
4
Assembly Please note

3
Brugermanual
Moonboon slyngevugge 3
User manual
Tripod stand for
baby hammock
Mounting
Hanging the hammock
Connect the hammock spring to the hook of the stand with a safety
snap hook. Do not use any chain with the spring or the hammock.
Please read the user manual for your baby hammock thoroughly.
Mounting the hammock motor
The stand is custom designed and tall enough to hold a hammock
and a hammock motor.
First, attach the motor to the hook of the stand using a carabiner.
Then, attach the spring and then the hammock under the motor
using another carabiner.
Both carabiners are to be oriented with the narrow end pointing to
the motor. Check that the carabiners are locked properly.
Ensure that the power supply cord to the motor is kept away from
the hammock and the stand.
Please read the user manual for your motor thoroughly.
It is important to use a stainless
steel safety snap hook without
coating.
Moonboons stand has been
developed to work with Moonboons
baby hammock and motor. If
you use a baby hammock and/or
motor of a different brand, we can’t
quarantee that it can be mounted
properly or will function correctly.
Please note
Please note
Never push the hammock back and forth, sideways or otherwise
use it as a swing while it is hanging in the stand. This applies both
with and without use of a baby hammock motor.
Important!

4
Brugermanual
Moonboon slyngevugge 4
User manual
Tripod stand for
baby hammock
Transportation
The stand is easily disassembled for transport. Clear items from the
hook of the stand, and turn the stand on its side. Now untwist the
stand pipes for carrying.
Please note that the internal threaded rods are not fastened to the
legs and can become loose when the legs are unscrewed. They will
fasten again when the legs are screwed back together.
Never move the stand while your
baby is in the hammock.
Please note