Mooreco Makerspace 91413 User manual

Makerspace 3D Printer Cart - with Hinged Door
UPDATED AS OF: 09/15/2020
Part Numbers: 91413
1 of 10
INSTRUCCIONES DE ENSEMBLAJE
NO LA TIRE
INSTRUCTIONS DE MONTAGE
NE PAS JETER
ASSEMBLY INSTRUCTIONS
DO NOT THROW AWAY!

O - Tapped Rivet x10
Parts
UPDATED AS OF: 09/15/2020 2 of 10
P1 - Top
P2 - Base
P3 - Side Panel
Right
P4 - Side Panel
Left
P5 - Back Panel
P6 - Side Shelf
P7 - Door
P8 - Shelf
P9 - Upright
P10 - Handle
P11 - Reel Hanger
x1
x1
x1
x1
x1
x1
x1
x4
x2
x2
x6
A - Locking Caster
B - Non-Locking Caster
C - Back Shelf Bracket
D - Front Shelf Bracket
E - Screw M3x12mm
F - Magnetic Door Catch
G - Cam Lock
H - Cam Post
I - Wood Dowel
J - Shelf Pin
K - Screw M6x15mm
L - Screw M6x25mm
M - Screw M6x38mm
N - CS Screw #4x16mm
x2
x2
x1
x1
x4
x1
x12
x12
x12
x16
x36
x4
x4
x6
Hardware
-Key
-Allen Wrench x2 x2 Q - Lock Components x1
Q1, Q2, Q3, Q4, Q5

For full product warranty details, please visit:
Para obtener información sobre la garantía del producto, consulte este sitio (ingles):
Pour plus d’informations sur la garantie du produit, consultez ce site (anglais):
For questions on assembly or missing/damaged parts, please contact us using the
following information.
Para preguntas sobre el ensamblaje o piezas faltantes o dañadas, por favor
contáctenos usando la siguiente información.
Pour toute question sur le montage l-assamblage manquantes ou endommagées,
veuillez nous contacter en utilisant les l’information ci-dessous.
To register your product for warranty, please visit:
Para registrar la garantía del producto, vea este sitio (en ingles):
Pour enregistrer la garantie de votre produit, consultez ce site (en anglais):
Review full assembly instructions and
check that all parts are present before
beginning assembly. Heavy or large
furniture may require multiple persons in
order to properly assemble. If you have
questions regarding assembly, contact
the manufacturer before continuing.
Damage due to incorrect assembly may
not be covered by warranty. Do not use
product unless all screws are tight. Check
all screws for tightness at least every
six months. If parts are broken, missing,
damaged, or worn, stop use of the product
until repairs are made by your dealer using
factory authorized parts.
WARNINGS AND DISCLAIMERS
WARRANTY
CARE & MAINTENANCE
PRODUCT REGISTRATION
UPDATED AS OF: 09/15/2020 3 of 10
Phone:
1.800.749.2258
(Monday – Friday, 8AM – 5PM
Central Time)
http://moorecoinc.com/warranty
https://moorecoinc.com/register
Email:
[e-mail]
Previo a comenzar el proceso de
ensamblaje favor de revisar las
instruccionesyasegurarsequecuentacon
todas las partes y materiales necesarios.
Es posible que los muebles grandes o
pesados, requieran mas de una persona
para ensamblarlos correctamente. Por
favor contacte al fabricante directamente
si tiene alguna duda o pregunta antes de
continuar con el proceso de armado del
producto. La garantía no cubrirá daños
que ocurrieron por errores cometidos
durante el proceso de ensamblaje. Todos
los tornillos deben estar ajustados previo
el uso del producto. Debe revisar los
tornillos periódicamente, por lo menos
cada seis meses y asegurarse de que
estén bien ajustados. Por favor detenga
el uso del producto si partes del producto
se pierden, rompen, se deterioran por uso
o se rompen. Favor de contactar a su
distribuidor para que le envíen las partes
necesarias o realice las reparaciones
necesarias con partes autorizadas por el
fabricante.
Avant de commencer l’ assamblage
veuillez consulter les instructions
complètes et vérier si vous avez toutes
les pièces nécessaires. Ill est possible que
plusieurs personnes soient nécessaires
pour assemble des meubles grand ou
lourds. En cas de doute sur l assamblage
contactez le fabricant avant de continuer.
Les dommages encourus pendant
l’assamblage ne seront pas couvert par
la garantie. Ne pas utiliser le produit sans
vérier que tous les vis soient serrées.
Vériez que les vis sont serrées au moins
tous le 6 mois. Si aucune pièce se casse,
manque, est endommagée ou usée,
arrêtez d’ utiliser de produit jusqu’à ce
que le vendeur le repaire a l’aide de pièces
autorisées par la fabricant.
ADVERTENCIAS Y RENUNCIAS AVERTISSEMENTS

STEP 1
UPDATED AS OF: 09/15/2020 4 of 10
STEP 2
Attach Back Panel to Side Panels with Tapped Rivets.
Insert Cam Posts and Dowels into Top.
P3
P4
P1
I
O
P5
H

STEP 3
UPDATED AS OF: 09/15/2020 5 of
STEP 4
Set Side and Back Panels onto Top. Rotate all Cam Locks to fix to Top.
Insert screws to panel tabs to secure to top. Mount Door Catch
to underside of Top using wood screws.
K
E
F

STEP 5
UPDATED AS OF: 09/15/2020 6 of 10
STEP 6
Set Uprights on Top and secure with one screw each.
Insert Cam Posts and Dowels to Base. Add Cam Locks to Side and Back Panels then set
Base onto panels. Rotate Cam Locks to secure.
I
P9
K
H
P2
G

STEP 7
UPDATED AS OF: 09/15/2020 7 of 10
STEP 8
Set Casters on Base and secure each with three 18mm screws through inserts and one 25mm
screw and Tapped Rivet in the corner. Install both Locking Casters in front and Non-Locking
Casters in the back.
Flip cart upright and install Handles using two screws each.
P10
M
K
L
O
A
A
B

STEP 9
UPDATED AS OF: 09/15/2020 8 of 10
STEP 10
Insert Shelf Brackets (Left and Right) through slots in side panel on cart. Set shelf on
brackets and secure with screws.
Insert Shelf Pins to inside of cart and set in Shelves by aligning routed slots with pins.
D
P6
J
P8
C
K

STEP 11
Install door by placing three wood screws through each hinge and tightening into door.
UPDATED AS OF: 09/15/2020 9 of 10
STEP 12
Install lock on Door.
Door Inside Face
Q1
Q2
Q3
Q4
Q5
P7
N
N

STEP 13
Insert Trays to corresponding shelves.
THIS COMPLETES ASSEMBLY INSTRUCTION
UPDATED AS OF: 09/15/2020 10 of 10
STEP 14
Mount Wire Hangers to side of cart using two screws each.
K