MopRite DELUXE User manual

Please read all instructions and inspect parts before use.
Retain manual for future reference.
SPINNING MOPSPINNING MOP
SPINNING MOP
AND BUCKET SYSTEM WITH WHEELS
DELUXE

PARTS LISTING
MOP
HEAD
TOP
POLE
BUCKET
HANDLE
WRINGER
BASKET RETRACTING
PULL
HANDLE
BUCKET
CLEANING SOLUTION
DISPENSER
WASH
AGITATOR
BOTTOM
POLE
LOCKING
LATCH
MOP PLATE
DISK
SCRUB
BRUSH

ASSEMBLY INSTRUCTIONS
1. Before assembling, please make sure you have all the parts listed on the previous page.
2. Screw the top pole into the bottom pole by turning the top grip clockwise until they
are securely tightened together.
3. Attach the mop plate to the mop pole by pushing the bottom pole into the mop plate joint.
4. Assemble the mop head by stepping down on the
mop plate. The mop is assembled and ready
to use when you hear a “click” sound.
5. Assemble the scrub brush by stepping down
on the mop plate. The scrub brush is assembled
and ready to use when you hear a “click” sound.
6. Adjust the handle and use the lock to
secure the length you want.

CAUTION
DO NOT REMOVE MOP HEAD UNTIL
SPINNING MOTION HAS STOPPED.
CAUTION
DO NOT REMOVE MOP HEAD UNTIL
SPINNING MOTION HAS STOPPED.
CLEAN/WASHING FEATURE
Deluxe spin basket is constructed of stainless steel for durability.
1. Place the mop onto the wash agitator in the base of the bucket.
Keep the handle straight when inserting the mop head.
2. Be sure all mop fringe is in the bucket before engaging operation.
3. Release the locking mechanism on the handle.
4. Press the mop pole down 3-5 times to wash off
the dirt, dust and hair.
DRY/WRINGING FEATURE
1. Place the mop into the wringer basket, be sure to keep the handle vertical for the
mop to rotate properly.
2. Be sure all mop fringe is in the basket before engaging operation.
3. Release the locking mechanism on the handle.
4. Press the mop pole down 3-5 times
to dry the mop threads.
DAMP CONTROL
You can control how wet the mop head should be
by spinning off excess water in the wringer until the
desired dampness of the mop head is achieved.
This allows the mop to be used for different jobs
such as cleaning, dusting or mopping up spills.

CHANGING MOP OR SCRUB BRUSH HEADS
USAGE INSTRUCTIONS
Foot positioned in alignment with
direction of screw on mop plate.
ADJUST ANGLE
The angle of the handle can be adjusted from
0 to 180 degrees, by simply moving the handle
back and forth.
MAXIMUM WATER LEVEL
Do not fill past the “Max water level” mark to
prevent overflow when wringing out the mop.
CAUTION
FILLING ABOVE THE MAX FILL LINE
WILL CAUSE THE SPIN WRINGER BASKET
TO NOT FUNCTION PROPERLY,
SPILL WATER AND NOT DRY THE MOP.
1. Step on the threads of the mop head near the edge of the mop plate.
DO NOT step on the mop plate.
2. Spin the mop handle so that one of the screws near the base of the handle points toward
your feet.
3. Push the handle away from your body. This will separate the mop head from the mop plate.
4 . The scrub brush is separated by stepping on the tab (located on the side of the brush) and
pushing the handle away from your body.
MAX FILL LINE