STEP 1 Secure both docking stations to
the wall/mounting surface: Pre-drill holes
using a 1/8” drill bit. Use at head screws or
lag bolts to secure the docking stations to the
mounting surface.
STEP 2 Secure the television to the mounting
plate: Line up the hole pattern on your television
with the matching hole pattern on the mounting
plate. Using the appropriate mounting hardware
and washers, secure the television to the
mounting plate.
CAUTION:
Using a screw or bolt length
that is too long for your application may
result in puncturing exterior structure.
STEP 3 Slide mounting plate with television into desired docking station:
Optional Washer (4)
Lock Washer (4)Bolt (4)
