morse 285SX-NT User manual

The Specialist In Drum Handling Equipment
Model 285SX-NT
Super-Duty Forklift-Karrier with No Tilt
CONTENTS
Page
Receiving Procedures. . . . . . . . . . . . . . . 1
Warranty. . . . . . . . . . . . . . . . . . . . . . . . 1
Safety Information. . . . . . . . . . . . . . . . 1 - 2
Machine Description. . . . . . . . . . . . . . 3
Assembly Instructions. . . . . . . . . . . . . 3
Operating Instructions. . . . . . . . . . . . . . . 4
Maintenance. . . . . . . . . . . . . . . . . . . . . 4
Parts Lists and Diagrams. . . . . . . . . . . . . . . . 5
Receiving Procedures
Every Morse drum handler is inspected prior to shipping. However,
damage may be incurred during transit.
Check for visible damage. If you choose to accept damaged•
freight, always sign noting the damage on the Bill of
Lading.
Document the damage and have the truck driver sign. We•
recommend keeping a digital camera at your receiving dock
for this purpose.
Open packages expeditiously to check the condition of the•
goods. There is only a 24 hour window to notify the carrier
of any concealed damage.
Immediately• report all damage to the shipping company!
Then you may contact Morse for assistance with your
freight claim.
Morse Manufacturing will not be held responsible for any•
damaged freight that is not signed for as damaged.
Limited 2 Year Warranty
Morse drum handling equipment is guaranteed against defects in
workmanship or materials for two years when used properly within
its rated capacity. Warranty does not cover wear from normal use
or damage from accident or abuse. Motors and other purchased
parts carry the warranties of their manufacturers.
For warranty claims, contact your Morse Dealer to obtain a
return authorization number, and for return freight advice. Return
freight must be prepaid.
In all instances, liability is limited to the purchase price paid or to
repairing or replacing the product. Customer assumes liability for
anymodications,unauthorizedrepairsorpartssubstitution.
Operator’s Manual
for Morse Super-Duty
Forklift-Karrier
Model 285SX-NT
Serial Number 1219 to ____ (MMYY)
Safety Information
While Morse Manufacturing Co. drum handling equipment is
engineeredforsafetyande󰀩ciency,ahighdegreeofresponsibility
must be placed upon the machine operator to follow safe practices,
based primarily on common sense, upon which true safety
depends.
Failure to follow the safety precautions in this manual can result in
personal injury or property damage. Observe the same precautions
as with similar machinery where carelessness in operating or
maintenance is hazardous to personnel. Carefully read the safety
precautions below and throughout this manual.
Copyright 2021 - Morse Mfg. Co., Inc. Form PL285SX-NT (1219-____) (Updated 5 May, 2021) 1
[email protected] 103 Kuhn Rd.
Syracuse, NY, 13208 U.S.A.
morsedrum.com [phone]

morsedrum.com
Copyright 2021 - Morse Mfg. Co., Inc. Form PL285SX-NT (1219-____) (Updated 5 May, 2021) 2
The Specialist In Drum Handling Equipment
Model 285SX-NT
Super-Duty Forklift-Karrier with No Tilt
Operator’s Manual for
Morse Super-Duty Forklift-Karrier with 3000 Lb. (1361 kg) Capacity - Model 285SX-NT
Serial Number 1219 to ____ (MMYY)
Safety Information (continued)
DANGER - Indicates a situation which, if not avoided, will result in serious injury or
death. This signal word is limited to the most extreme situations.
WARNING - Indicates a situation which, if not avoided, could result in serious injury or
death.
CAUTION - Indicates a situation which, if not avoided, can result in damage to the
machine.
CAUTION – Do Not Transport with Drum Raised. Always lower the drum holder to lowest position before
transporting.
WARNING - The Forklift-Karrier is designed to handle one drum of the types listed at the top of page 3. Machine
Description. DO NOT attempt to handle any other type of drum or object. DO NOT exceed the weight capacity of
3000 Lb. (1361 kg).
WARNING - Do Not Modify the Unit.
UndernocircumstancesshouldanymodicationsbemadetotheMorsemachinerywithoutfactoryauthorization.
Anymodicationsmayvoidthewarranty.Thismachinewasdesignedtoperformaspecicjobandalterations
may result in injury to operator or machine.
WARNING - No Loose Fitting Clothing
Wearclose-ttingclothingandsafetyequipmentappropriatetothejob.Loosettingclothingmaybecomecaught
on the machinery and cause severe personal injury.
CAUTION - Wear Safety Shoes
Wear safety shoes with non-slip soles and hard toe protection.
CAUTION: DONOTallowdrumtoimpactonoor,ground,ordumpingstation,etc.
WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and
2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to
the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov

The Specialist In Drum Handling Equipment
Model 285SX-NT
Super-Duty Forklift-Karrier with No Tilt
Operator’s Manual for
Morse Super-Duty Forklift-Karrier with 3000 Lb. (1361 kg) Capacity - Model 285SX-NT
Serial Number 1219 to ____ (MMYY)
morsedrum.com
Copyright 2021 - Morse Mfg. Co., Inc. Form PL285SX-NT (1219-____) (Updated 5 May, 2021) 3
Machine Description
The Model 285SX-NT Super-Duty Forklift-Karrier with NO Tilt is designed to lift and
transport a ribbed 55-gallon (210 liter) steel drum 22.5” (57 cm) in diameter. The maximum
full-drum capacity is 3000 Lb. (1361 kg).
Assembly Instructions
Prior to initial use, inspect all moving parts and saddle (drum holder) assembly.1.
Perform necessary load test, inspections, operator training, etc.
Important
Review the Material Safety Data Sheet(s) for the material(s) in the drum(s) and1.
take all necessary precautions. Safety shoes, work gloves, hard hat and other
personal protective devices are recommended.
Please read all instructions thoroughly before attempting to operate your new2.
Morse drum handler.
The model 285SX-NT has a maximum capacity rating of 3000 Lb. (1361 kg)3.
drum, and is designed to lift and move a 55-gallon (210 liter) steel drum. DO NOT
exceed these ratings. Exceeding these ratings or handling drums other than those
mentioned above is unsafe and could result in equipment damage, excessive wear
or awkward handling.
When loading, unloading, operating, or maintaining your MORSE drum handler,4.
alwaysusecareandgoodjudgment.Maintainsecurefootingandarmhold.
Keep hands and loose clothing away from all moving parts. Never allow anyone to
be below any part of a raised drum handler or drum. Read operating instructions
and review the pictures in the sales brochure before operation.
Because the model 285SX-NT is a front-end attachment for a forklift, OSHA5.
recommends that “… the truck (forklift) be marked to identify the attachment(s) and
show the approximate weight of the truck and attachment combination at maximum
elevation with load laterally centered.”
Net weight of Morse model 285SX-NT is 172 Lb. (78 kg).
Prior to initial use, inspect all moving parts and saddle (drum holder) assembly.6.
Inspect saddle assembly for proper operation. Perform necessary load test,
inspections, operator training, etc.

morsedrum.com
Copyright 2021 - Morse Mfg. Co., Inc. Form PL285SX-NT (1219-____) (Updated 5 May, 2021) 4
The Specialist In Drum Handling Equipment
Model 285SX-NT
Super-Duty Forklift-Karrier with No Tilt
Operator’s Manual for
Morse Super-Duty Forklift-Karrier with 3000 Lb. (1361 kg) Capacity - Model 285SX-NT
Serial Number 1219 to ____ (MMYY)
Operating Instructions
Before sliding forklift forks into the fork tubes, adjust forks to an inside spread of 25.5” (64.8 cm) minimum. Lock forks into position on1.
the forklift carriage.
Drive the forklift forward to slip the forks into the fork tubes. Tighten tee screws to secure the Forklift Karrier to the forks, or secure2.
chain anchor between forklift cariage and Forklift-Karrier. Transport Forklift Karrier to drum to be handled.
DrivetheforkliftwiththeForkliftKarriernearoorleveltopositionthesaddlebandaroundthemiddleofthedrumbetweentheribs.3.
Open the toggle clamp by activating the release lever and4.
swing both hinge bands to the open position. Push the Forklift-
Karrier against the drum to surround the drum with the saddle
band.
Close the two hinged bands around the drum and latch the5.
toggle clamp to secure the drum.
Raiseforkstocleartheoorandtransportdruminvertical6.
position to dispensing location.
While transporting, ensure that the drum is raised away from7.
theoortopreventthedrumbottomfrominterferingwitha
pallet or other obstacle.
Remove the drum by activating the release lever and opening8.
the toggle clamp. Swing both hinged bands open. Drive the
forklift away from the drum.
Maintenance
Periodicinspectionforthegeneralconditionofstructuralandmechanicalcomponentsisimperativeforsafeande󰀩cientoperation.
Periodically inspect all moving parts, framework, drum holder and contact areas for signs of wear, fatigue, or loosening. Tighten,•
adjust, or replace parts as necessary to prevent failure and maintain proper function.
Oil or grease all moving parts.•
Worn or damaged parts must be properly replaced with the correct, genuine Morse parts.•

The Specialist In Drum Handling Equipment
Model 285SX-NT
Super-Duty Forklift-Karrier with No Tilt
Operator’s Manual for
Morse Super-Duty Forklift-Karrier with 3000 Lb. (1361 kg) Capacity - Model 285SX-NT
Serial Number 1219 to ____ (MMYY)
morsedrum.com
Copyright 2021 - Morse Mfg. Co., Inc. Form PL285SX-NT (1219-____) (Updated 5 May, 2021) 5