Mortch Falcon User manual

FALCON
User’s Manual
Mortch International Ltd
Http://motor.mortch.com

Preface
Thank you very much for purchasing our scooters. And welcome to join the driver’s line of MORTC motorcycle.
With its extraordinary advantages of excellent quality, smart appearance and shape of legerity, our product will surely
bring the utmost pleasure and convenience to your life.
This manual gives you information about the general structure, function, operation and maintenance methods of
FALCON. In order to enable your beloved motorcycle to render a best performance and a longer life, please read this
manual carefully, pay particular attention to the running-in part in it and follow all the operating instruction. It is of great
importance to make your riding safer and more comfortable. Experienced staffs in our sale agency and the maintenance
shop will also offer excellent service for you.
● Please take an initial examination of your motorcycle after the first 300km running in our designated maintenance
shop, and take regular examination in every 1000km thereafter.
● All the direction, illustration and specification included in t his manual are based on the latest product information.
Please be noted that they may be different from the actual status of the motorcycle if there is new revision on its
specification, and no further advice will be given.
● This motorcycle was designed and manufactured which complied with e-mark, the safety standard of Europe Union.
Please do NOT change any parts without professional advice and use non-original parts in case of avoiding danger
to driver and the broken of traffic laws.
Mortch International Ltd
Http://motor.mortch.com

CONTENTS
Guidance …………………………………………………………………………………………… 1
Names of parts ……………………………………………………………………………………… 3
Controlling parts ……………………………………………………………………………………… 4
Fuel tank …………………………………………………………………………………………… 6
Fuel and engine oil …………………………………………………………………………………… 6
Starting pedal ………………………………………………………………………………………… 6
Pre-riding inspection ………………………………………………………………………………… 7
Engine starting ……………………………………………………………………………………… 8
Running-in …………………………………………………………………………………………… 9
Regular maintenance ………………………………………………………………………………… 10
Tools ………………………………………………………………………………………………… 16
Technical Parameters ………………………………………………………………………………… 17
Electrical Circuit Chart ………………………………………………………………………………… 19
Mortch International Ltd
Http://motor.mortch.com

1
□
□□
□ Guidance
Please keep safety in your mind and observe the regulations of transportation while enjoying your riding. Pay attention to
the following rules:
1. Pre-riding inspection
Please read the details in the relevant chapter for your safety.
2. Hel et
Do remember to wear helmet while riding.
3. Being fa iliar with otorcycle operation
It is of great importance to ensure your safety getting familiar
with motorcycle operation.
4. Speed li itation
Drive at proper speed in accordance with the road condition,
the weather and your driving skill.
WARNING
It is dangerous to drive on the wet road.
Do not make an abrupt turning while
accelerating and keep proper distance
from other vehicles.
Mortch International Ltd
Http://motor.mortch.com

2
5. Positions of the nu bers
The frame number and the engine number are for the purpose of
registering the motorcycle. When your motorcycle needs
inspection, repair or other special service, the number will enable
you to get good service from our sale agency. Please note down
your number here:
□
□□
□ The fra e nu ber:
□
□□
□ The engine nu ber:
engine number
frame number
Mortch International Ltd
Http://motor.mortch.com

3
□
□□
□ Na es of parts
BAO
TIAN
BT49QT-2
1 2 3 4 5 6 7 8 91011 12 13 14 15 16 17
18
19
20
15. left front turning light
2. front sho k absorber
4. rear brake lever
5. helmet hook
18. meters
7. seat
9. starting pedal
8. main stand
10. rear sho k absorber
16. right fro nt turning light
12. taillight & rear turning light
17. rig ht rear -view mirror
1. brake dis
14. head light & position light
3. front brake assy.
19. left rear -view mirror
6. side stand 11. drum brake
13. hand- hold
20. muffler
Mortch International Ltd
Http://motor.mortch.com

4
□ Controlling parts
1. Rear brake lever
old it tight and the rear brake works.
2. Switches on the left
A. Switch for high/low beam lights
B. Turning signal switch
Left turning light
Right turning light
C. orn button
D. Danger signal button
3. Meters and indicating lights
A. Indicates the speed in km/ h and Mph
B. Indicates total distance the motorcycle has run
C. Left turning light indicator
D. Right turning light indicator
E. Fuel gauge F. Indicates the rev in 1000r/min
G. igh beam indicator
C
B
A
D
A CB FD E G
Mortch International Ltd
Http://motor.mortch.com

5
4. Front brake lever
old it tightly and the front brake works.
5. Switches on the right
A. ead light switch
B. Starting button
When the ignition switch is at ON position, hold
the brake and press the button and then the
engine starts.
6. Ignition switch
ON: Engine can be started and all the lights
can be operated. The key cannot be
taken out.
OFF: The whole circuit is cut. Engine and lights
cannot be operated and the key can be
taken out.
LOCK: Turn the steering handlebar fully to the left,
slightly press the key and turn it to the
lock position. Then the key can be taken
out.
A
B
---ON
---OFF
---LOCK
U
S
H
P
Mortch International Ltd
Http://motor.mortch.com

6
Warning
15w/40-15w/50
10w/40
10w/30
-10 010 20 30 40C °
20 40 60 80 100 ° F
T
20w/40-20w/50
□
□□
□Fuel tank
Usage of the fuel tank lock:
1. Insert the key and open the seat.
2. Turn the cap counter-clockwise and take off it.
3. Align the lock tongue on cap with the notch on
the fuel tank, turn the cap clockwise and
tightened it.
`
□
□□
□Fuel and engine oil
A. Gasoline
igh quality fuel is essential to the engine.
Any sand in the fuel is absolutely prohibited.
90# or higher quality unleaded gasoline is
preferred.
B. Engine oil
SAE15w/40 SF
□
□□
□Starting pedal
Starting pedal is for kicking start of the engine.
◆
Turn off
the engine when refilling the tank.
◆Turn off the cap slowly.
◆Don’t overfill the gasoline over the designated scale.
◆Do not add anything into the gasoline.
lo k tongue
not h
open
ap
seat lo k
starting pedal
Mortch International Ltd
Http://motor.mortch.com

7
□
□□
□Pre-riding inspection
Please check the following parts before you drive.
No. Items Inspection content
1 Steering handlebar 1.Flexibility 2.No gap or loosing appearance
2 Brake system 1.Travel of front brake and rear brake 2.No break on the cable
3.Flexible function
3 Tires 1.Proper pressure 2.No crack or cutting
4 Fuel Sufficient fuel
5 Engine oil Sufficient engine oil
6 Lights Workable
7 orn Workable
8 Gear oil With normal stock
9 Throttle 1. Proper gap 2.Flexible function 3.Proper control lever returning
10 All the bolts and nuts No loosing appearance.
Mortch International Ltd
Http://motor.mortch.com

8
□
□□
□Engine starting
1. Please check the volume of engine oil and
gasoline before starting. The main stand and
the side stand should not be stood up while
starting the engine.
2. Turn the ignition switch to the “ON” position.
3. Engine Starting
Press the starting button and then the engine
will be started.
◆ Grip the rear brake lever in case that the
motorcycle rushes forwards abruptly.
Warning
Grip the rear brake lever "ON" position
U
S
H
P
Mortch International Ltd
Http://motor.mortch.com

9
4. Kick Starting
Grip the brake lever, tread the starting pedal
heavily and then the engine will be started.
□
□□
□Running in
To keep your motorcycle running in a good
condition, please follow the below rules during the
running-in period.
Distance (km) Speed limitation (km/h)
0-300 25
300-1000 35
1000----- ≤45
◆
5 seconds is the maximum limit for each
startin
g
and10 seconds is the minimum interval.
◆ Stop pressing the starting button immediately
after the engine starts.
◆ Do not press the starting button while the engine
is running, or the start motor will be damaged.
◆ When using electric starting, please press the
rear brake lever in advance to get through the
circuit and start the motor.
◆ When using electric starting, don’t operate the
starting motor continually, or it may cause
damage to the starting motor and the battery.
◆ Warm up the engine after cold starting (about 3
minutes).
Warning
◆
After the engine starts, the start
ing
pedal
should be turned to its original position.
Otherwise, it will affect the driver’s safety.
◆ Please don’t start the engine in unventilated
places, because the wasted gas with CO is
harmful to human beings.
Warning
Mortch International Ltd
Http://motor.mortch.com

10
□
□□
□Regular aintenance
Interval
Item
Km
300
1000
3000
6000
1
2000
Month
N
ew motor
1
3
6
12
Battery
I I I I I
Engine oil strainer
C C
Gasoline strainer
R
Carburetor
I I I C
Air cleaner
core
Clean it every 2000km
Spark plug
Clean every 3000km, replace when necessary
Fuel
throttle
A A A A
Drive belt
I I
Engine oil
R R Replace every 3000km
Brake
system
I I I I I
Front fork and steering
stem bearing
I I I I
S
uspension
I I I I
Tires
I I I I I
Fastening nuts and bolts
I F F F
Gear oil
R Replace every 5000km / 5Month
Rear brake cam
C
NOTE: I=Inspect and clean 、 adjust 、 replace or lubricate when necessary, C=Clean, R=Replace, F=Fastened
Service more frequently when riding in dusty conditions.
Mortch International Ltd
Http://motor.mortch.com

11
1 . Battery
12V/5.7Ah battery
① When the voltage is less than 11.5V, please
use kicking start in stead of electric starting.
② Put the ignition switch on OFF position before
battery replacement.
③ Electrode identification: “+”— red line, “-”—green line.
④ Change a new battery every 4 years.
2. Carburetor and idling speed adjust ent
① Keep the engine warmed up for 2-3 minutes.
② Adjust the idling speed screw to set the
engine at speed of 1900±100 rpm. The idling
speed adjusting screw is following:
3. Air cleaner
A: Air cleaner is on the left rear side of the
motorcycle. Remove 6 tightening screws of air
cleaner cover.
B: Remove air cleaner cover and take out of the
sponge core.
C: a---- Pour the non-inflammable detergent into a
basin and immerse the core into the detergent.
Warning
◆It has been fully adjusted to the highest
position when manufactured.
idling speed adjusting s rew
s rew
air leaner over air leaner ore
A B C
dba
Mortch International Ltd
Http://motor.mortch.com

12
b----Press the core in palm to squeeze the
detergent out of it. Never twist it in case that
it is broken.
c----Immerse the core into engine oil.
d----Squeeze the excessive oil out but keep it
lightly oil immersed.
4. Spark plug
◆Clean the carbon deposit on the spark plug
with a piece of hard wire or steel needle.
◆Adjust the gap to 0.6-0.7mm with a thickness
gauge.
◆Use A7RC when replacement is needed.
5. Fuel
Refill the recommended unleaded gasoline
with an appointed number of 90# or higher
when the indicating needle points to the red
area in the fuel gauge.
NOTE: Unleaded gasoline will extend spark
plug and catalytic converter life.
6. Engine oil
Replace the engine oil with the engine warmed up.
① Remove the oil dipstick.
oil dipsti k
upper
lower
oil dipsti k oil plug
for displa ement
Mortch International Ltd
Http://motor.mortch.com

13
② Remove the oil plug for displacement to drain
the used oil.
③ Reinstall the oil plug for displacement, paying
attention to be tightened .
④ Refill 0.8 L recommended fresh engine oil.
⑤ Fasten all the nuts and screws.
7. Brake syste
Normal free stroke of the brake lever is about
10-20mm.
① The front brake (disk brake)
②The rear brake (drum brake)
Turn the adjusting nut to get a proper stroke.
◆ FREE STROKE means the distance between
the positions from free status to the
beginning performance of the brake.
◆ Pay attention to the sensitivity of the brake.
Warning
a
a=10~20mm
a=10~20mm
a
adjusting nut
Mortch International Ltd
Http://motor.mortch.com

14
☆ Disk brake
◆Grip the brake lever and check the wear & tear
indicator . If the indicator nearly touched the brake
disc, please ask the appointed maintainer to
change the brake blocks.
①wear & tear indicator ②brake disc ③brake blocks
◆Check the following items of brake system
before driving the motorcycle:
① Check if there is any leakage;
② Check if there is any leakage or crack on the
oil pressed hose;
③ The brake lever should be kept with a certain
free distance of 10～20mm and kept a certain
re-grip power;
④ Abrasion of the brake blocks.
◆Brake oil level
① It has been filled with the special brake oil
before the motorcycle leaves the factory. User
should fill or change the qualified brake oil (such
as No.DOT3 or DOT4 brake oil) from the
appointed maintenance station. Never change or
mix other oil, otherwise it would damage the brake
system.
②If the brake oil is insufficient, it might be
possible for the air to come into the brake system
and result in the failure of the system.
③
②
①
Mortch International Ltd
Http://motor.mortch.com

15
1mm
8. Tires
Insufficient tire pressure hastens wear of them
and affects the riding stability. Please check the
tire pressure and tread depth when applying
regular maintenance.
①Tire pressure: front 225 KPa, rear 250 KPa.
②Tread depth: It is suggested to replace a new
tire when the tread depth is less than l mm.
9. Starting otor
Check the fastening bolts and the carbon brush,
and replace them if necessary.
10. Fuse
Fuse (10A) is linked with the outer line of the
battery. When a light or circuit fails suddenly,
please check the fuse first.
◆
The standard tire is
110/70
-
12 47J
for
front
and rear tires. Another type of tire may cause
trouble.
◆ Tire inflation pressures and the general tire
condition are extremely important to the pro-
per performance and safety of the vehicle.
Warning
◆ The fuse can not be replaced by any iron
or aluminum wire.
Warning
Warning
◆ Brake oil is corrosive material. It would damage
and corrupt the painting of the part. It should be
cleanout if the oil splash on the part.
◆ If the oil sprayed on the skin or eyes, it should
be cleaning quickly with a lot of water.
Mortch International Ltd
Http://motor.mortch.com

16
11. Gear oil
Please use the recommended gear oil:
SAE85W/90
Total capacity: 110ml
Replacing capacity: 100ml
ow to change gear oil
 Stand up the main stand.
 Take off the oil plug for supplying.
 Take off the oil plug for draining, let off all the
dirty gear oil.
 Tighten the oil plug for draining.
 Refill fresh gear oil from the sprue and
tighten the oil plug for supplying.
After refilling, please make sure you have locked
the oil plug and bolts.
□
□□
□Tools
A full set of tools is offered for your daily use.
oil plug for supplying
oil plug for displa ement
Mortch International Ltd
Http://motor.mortch.com

17
□
□□
□Technical Para eters
Items Specifications
Size
Length
Width
eight
Wheel base
1965mm
700mm
1120mm
1420mm
Weight
Unloaded weight
Max. load
98kg
188kg
Capacity Max. Speed
Slope
45km/h
≥21°
Circuit system
Spark plug
Battery
Fuse
eadlight
Front turning lights
Rear turning lights
Brake light
Position lights
A7RC
12V/5.7A
10A
12V 35 / 35W
12V 10W
12V 10W
12V 21/5W
12V 5W
Volume of the fuel tank
Volume of the engine oil tank
6L±0.5L
1L
Mortch International Ltd
Http://motor.mortch.com