Motec M1 Series User manual

© MoTeC Published 3 May 2016 www.motec.com 1
M1 SERIES
QUICK START GUIDE
READ THIS FIRST
Installing and tuning an M1
ECU is vastly different to
previous MoTeC ECU
products.
It is highly recommended that
you read the M1 Tune manual
for information on how to use
this product. There are also
training videos on the USB
stick that you should watch
prior to using the product.
If any further information is
required, please visit
www.motec.com/forum or
contact [email protected].
 CONTENTS
Your M1 kit should contain the following items:
M1 ECU
MoTeC USB stick
M1 Quick Start Guide (this document)
MoTeC sticker
Ancillary parts – these may include cables, looms and other devices, supplied
according to the product purchased, or as required for the relevant application.
 GETTING STARTED
The MoTeC USB stick contains all the required software and supporting
documentation for your M1 installation, plus additional information about the M1 series
and other MoTeC products.
Quick start process:
1. Connect the supplied USB stick to your PC
2. Browse the USB stick, and run the MoTeCCD.exe file
3. Select the Software button
4. Select the M1 Series Software button
5. Select and install the Release version of M1 Tune
6. When the installation completes, select the Back button to return to the Main
Menu
7. Select the Packages button
8. Search for the M1 Package that you intend to use
9. To install the Package, double-click on the Package name
10. When the installation completes, select the Back button, and then Exit
11. On returning to the desktop, launch the M1 Tune software using the M1 Tune icon.
If the M1 ECU is connected, it is now possible to communicate with it; otherwise, open
the installed Package in an offline state.
Some firewalls and anti-virus software may interfere with communication between
M1 Tune and the ECU. For assistance, see “Establishing ECU Communications” in the
M1 Tune help or User Guide.
To open an offline Package:
1. From the Quick Launch window, select the Browse Packages button, or use the
File > Open Package menu option.
If the Quick Launch window is not displayed, it can be selected from the Quick
Launch tab located on the left edge of the MI Tune window.
2. Select the required Package and either double-click on the Package name to open
it or select the Open button.

© MoTeC Published 3 May 2016 www.motec.com 2
M1 SERIES
TO SEND A PACKAGE TO THE M1 ECU
A Package may be sent to the M1 ECU once it has been
opened in M1 Tune:
Open the Package:
-Choose File > Open Package from the M1 Tune
menu bar.
-Select the Package you wish to send to the M1
ECU. Package variants may be filtered in the Quick
Filter panel on the left side of the Open Package
dialogue, by serial number, ECU type etc.
-Highlight the Package you wish to open and select
the Open button.
Once the file has been loaded, you can select the
serial number of the ECU to which you want to send
the Package :
-Choose File > Edit Target ECU Serial # from the
menu bar. A list of currently visible ECUs is
displayed.
Send the Package to the target ECU:
-Choose File > Send from the menu bar. The
Package will be sent to the M1 ECU. A progress
bar indicates each phase of the Package send.
Note: The Package send process involves
numerous resets of the ECU as different elements
of the Package are downloaded. This is normal
and you should expect the Package send process
to take up to a minute.
-Upon completion of the Package send, live data
from the M1 ECU should bevisibleinTune,
dependingontheparticularWorksheetinuse.
-Choose the M1 ECU to which you want to send the
Package and click OK. If the ECU you wish to
select is not visible you should ensure that the ECU
is powered and connected to the PC via Ethernet.
The serial number can also be manually entered.
-The Package is now ready to send.