Motion CM-06 User manual

CM-06
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Li-ion battery powered tube motors with
pull and remote operation
MANUAL CM-06

MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Motor features
Control options
Support
CM-06
Li-ion battery powered tube motors
with pull and remote operation
Pull Control
Operate with
pull control
Li-ion Battery
Integrated
lithium-ion battery
Remote Control
Operate with a
remote control
USB Rechargeable
Rechargeable with
USB -C cable
App Control
Operate with the
MOTION Blinds app
Bluetooth Control
Operate with the
MOTION Blinds
Bluetooth app
Wireless
Cable free
installation
Connectivity
Compatible with
home and building
automation
Speed Control
Consistent
rolling speed
Bi-directional
Two-way
communication for
real-time response
Support
Video
How to install,
program and operate
rtube.nl/red1613
2

Conforms to
UL Std. 325
Certified to
CSA Std. C22.2#247
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
WARNING
Read the instructions carefully
before assembling and
using the product. Assembly
can be completed by non-
professionals. For indoor use
only.
Young children can strangle
themselves with the loop
of pull cords, chains and
tapes, and cords that operate
window coverings.
To avoid strangulation and
entanglement, keep cords out
of reach of young children.
Cords may ensnare a child’s
neck.
Move beds, cots and furniture
away from window covering
cords.
Do not tie cords together.
Make sure cords do not twist
together and form a loop.
Cleaning
Follow these general rules when cleaning the outside
of the device and its components:
Use a damp, soft, lint-free cloth. Avoid getting
moisture in openings.
Do not use aerosol sprays, solvents, alcohol, or
abrasives.
Service & Support
Do not perform repairs yourself. Do not attempt to
open the device or disassemble it. You run the risk of
electric shock and voiding the limited warranty. No
user-serviceable parts are inside.
Warranty Service
First follow the advice in this manual. If the product
appears to be damaged or does not function properly,
go to your local dealer for instructions on how to obtain
warranty service.
Recycle
This marking indicates that this product should not
be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment
or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse
of material resources. To return your used device, please
use the return and collec-tion systems or contact the
retailer where the product was purchased. They can
take this product for environmental safe recycling.
English
3

MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Important Safety instructions
WARNING: To reduce the risk of severe injury or
death, it is important to follow these instructions for
personal safety. Save these instructions.
Read and follow all installation instructions.
This appliance can be used by children aged
8 years and above and persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved. Children should not play with
the appliance. Cleaning and user maintenance
should not be performed by children without
supervision.
Do not allow children to play with fixed controls.
Keep remote controls away from children.
Frequently examine the installation for imbalance
and signs of wear or damage to cables and
springs. Do not use if repair or adjustment is
necessary.
This instruction manual is also available on the
website.
The drive must be disconnected from its power
source during cleaning, maintenance and when
replacing parts.
The A-weighted emission sound pressure level of
the drive is equal to or less than 70dB(A).
Indoor and household use only.
Disconnect the drive from the power supply
or switch off the automatic controls when
maintenance, such as window cleaning, is being
carried out in the vicinity.
When operating a biased switch, make sure that
other persons are kept away.
Do not operate when maintenance, such as
window cleaning, is being carried out in the
vicinity.
The tube motor must only be supplied with safety
extra low voltage corresponding to the marking on
the appliance.
Important Installation instructions
WARNING: Important safety instructions. Follow all
instructions, since incorrect installation can lead to
severe injury.
This motor can only be used with soft material for
driven parts.
Hazardous unprotected moving parts of the drive
must be installed higher than 2.5m above the
floor or any other level surface that could provide
access to it.
Install the actuating member of a manual release
at a height less than 1.8m.
The actuating member of a biased switch is to be
located within direct sight of the driven part but
away from moving parts. It is to be installed at a
minimum height of 1.5m and not accessible to
the public.
The mass and the dimension of the driven part
must be compatible with the rated torque and
rated operating time.
Fixed controls have to be clearly visible after
installation.
The driven part must be compatible with the
rated torque 6 N.m and rated operating time
(12 min).
Minimum tube diameter: Ø35mm.
The drive is intended to be installed at a height
of at least 2.5m above the floor or any other
accessible level surface.
All-pole disconnection switches must be
incorporated in the fixed wiring in accordance with
the wiring rules.
The appliance must only be supplied at safety
extra low voltage corresponding to the marking on
the appliance.
Before installing the drive, remove any
unnecessary cords or components and disable
any equipment not needed for powered operation.
4

MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
FCC Manual | FCC ID: ZY4CM06
Regulatory Information
1 FCC Information for User
This product does not contain any user
serviceable components and is to be used with
approved antennas only. Any product changes or
modifications will invalidate all applicable regulatory
certifications and approvals.
2 FCC Electronic Emission Notices
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired
operation.
3 FCC Radio Frequency Interference
statement
This equipment has been tested and found to
comply with the limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference, in which case the
user will be required to correct the interference at
their own expense. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna
Increase the distance separating the equipment
and receiver
Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected
Consult the dealer or an experienced radio/TV
technician for help
EU Declaration
Hereby, Coulisse declares that the radio
equipment type CM-06 is in compliance whith
directive 2014/53/EU.
The full text of the EU declaration of conformity
is available at the following internet address:
www.my.coulisse.com
English
5

1
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Install your blind
6

2
2
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
English
Download the MOTION Blinds bluetooth app
Download the MOTION Blinds app
Scan the QR code on your blind with the MOTION Blinds Bluetooth app to set your end limits and,
once the end limits have been set, you can control your blinds with your phone. To set the end limits
without your phone, please continue to step 3.
With the MOTION Blinds bridge you can unlock more options, such as voice assistants and the ability
to control your blinds when you are not at home.
App Store
Download the
MOTION Blinds
Bluetooth app
rtube.nl/red1614
App Store
Download the
MOTION Blinds
Wi-Fi app
rtube.nl/red981
Google Play
Download the
MOTION Blinds
Bluetooth app
rtube.nl/red1615
Google Play
Download the
MOTION Blinds
Wi-Fi app
rtube.nl/red982
7

3
4
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Activate the motor by charging it with a USB C cable. A green LED will start flashing.
The motor can be used during charging.To activate the motor without a USB C
cable, see step 18)
Activate the motor
Roller blind
Roman blind
Find the program button on your blind
Venetian blind
8

5.1
5.2
5.3
5
6.1
6.2
6
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Shortly press the program button on the
motor. The blind will start stepping, indicating
that program mode has been activated.
(The blind remains stepping until the program
mode is de-activated.)
Repeat steps 5.1 - 5.3 to remove a blind from
a channel.
Press the pair button on the back of the remote
control to pair the blind to the selected channel.
The blind will shortly stop stepping indicating
that the remote has been paired to the blind.
Select a desired channel for the blind using the
channel selection button on the remote control.
Channel
Selection Pair
Button
Channel
indicator
Pair a remote
English
Up
Down
Pair a remote control that is able to program blinds. In this manual
CM-12 is displayed.
Shortly
press
Shortly press the down button to check if the
blind unrolls the right way. If the blind moves
up the direction of rotation must be changed.
Simultaneously press the up and down button
to change the direction of rotation.
End limits must be programmed to use a blind properly and to prevent it from being damaged.
Proceed to step 11 if end limits are already set.
WARNING: risk of damage.
Stop the blind before reaching
the end positions.
Check direction of rotation
9

8
7
8.1
7.1
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Set bottom position
Down
Up
Center
Press and hold the down button until the
blind reaches the desired bottom position.
WARNING: Risk of damage.
Slowly approach the bottom position.
Simultaneously hold the center and the up
button until the blind stops stepping and
starts stepping again.
The bottom position has been saved.
10

9
10
9.1
10.1
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Set top position
Down
Center
Press and hold the up button until the blind
reaches the desired top position.
WARNING: Risk of damage.
Slowly approach the top position.
Simultaneously hold the center and the down
button until the blind stops stepping and
starts stepping again.
The top position has been saved.
Up
English
11

11
12
11.2
11.1
12.1
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
De-activate program mode
Set favourite position (optional)
Move the blind to a desired favourite position.
Center
Hold the center button to save this favourite
position. The blind shortly stops stepping
indicating the favourite position has been
saved.
Shortly press the program button to de-activate
program mode. The blind stops stepping and can
be operated.
Shortly
press
12

3 s
13
14
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Remote control: Choose the channel to which the blind
has been paired using the channel button.
Direct control off : Shortly press the up or down button
to slightly tilt the blind. Hold the up or down for 2
seconds and the blind will move to the end position.
Press the center button to stop the blind.
Direct control on : The blind will move to the end
position by a single press on the up or down button.
Press the center button to stop the blind.
Center
Operate the blind
Operate to favourite position
Pull control: pull once to move the blind to the end
positions. Pull again to stop the blind.
Direct control off : The blind will tilt slowly and lift at normal
speed.
Direct control on : The blind will tilt and lift at normal speed.
Remote control: Hold the center button to move the
blind to the favourite position.
Pull control: Pull and hold to move the
blind to the favourite position.
Up
Down
Center
Channel
Selection
English
13

5 s
15
16
16.2
16.1
15.1
15.2
15.3
15.4
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Move the blind to a desired favourite position.
Press the program button on the motor to activate
program mode. The blind starts stepping.
Hold the center button to save this favourite
position. The blind shortly stops stepping indicating
the favourite position has been saved succesfully.
Press the program button on the motor to de-activate
program mode. The blind stops stepping.
Press the program button on the motor to activate
program mode. The blind starts stepping.
Hold the program button until the blind stops stepping (approximately 5 seconds)
to de-activate or re-activate direct control.
When pressing the up or down button on the remote control the blind directly moves to
its end positions (direct control). To operate the blind with smaller steps using the up and
down button, direct control can be de-activated. Now, the blind only directly moves to its end
positons when the up or down button is held longer than two seconds.
The motor will also tilt slowly when using the pull function.
Center
Reset favourite position
De-activate direct control
Shortly
press
14

17
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
English
Use a USB C cable to
charge the motor
LED light flashes
red during operation;
Charge the battery
LED light flashes
green;
battery is charging
LED light constantly
green;
battery is fully charged
Recharge the battery
15

.1
10 s
20 s
i
i
10 s
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
It is possible to only delete end limits or to do a default factory reset.
A default factory reset will delete the end limits and remove the connection to any paired remote.
Press the program button on the motor to activate program mode.
Delete end limits: To delete the end limits of the blind hold the program button
until the blind stops stepping for the first time, keep holding the button until the
blind stops stepping for the second time. (approximately 10 seconds)
Default factory reset: To reset the blind to the default factory setting hold the button for at least 20
seconds.The blind will stop stepping twice. After the second stop the blind will give one extra step to
confirm the default factory reset.
Reset the blind
Hold the button 10 seconds to reset the bluetooth pairing. Any
paired device will be reset.
Reset bluetooth
Shortly
press
Hold
16

18
18.1
+2x
2x
MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Hold the program button and pull twice to activate or deactivate the motor.
The motor can also be activated by charging it with a micro USB cable.
To prevent the blind from getting damaged, the motor has a transport
mode that makes sure the blind will not be activated before installation.
Activate / deactivate the motor
or
English
Frequently Asked Questions
Problem Cause Solution
Blind does not work.
Motor is in transport mode. Activate the motor. See step 18.
Motor battery is empty. Charge the motor. See step 17.
Remote battery is empty. (LEDS of remote
are flashing rapidly.)
Replace the battery in the remote.
See the manual of the remote.
Remote battery is inserted incorrectly. Replace the battery in the remote.
See the manual of the remote.
Radio-frequency interference Make sure that the antenna of the motor is
out of the way of metal objects.
The distance from the remote/phone to the
motor is too far.
Move closer to the motor.
The remote is not connected to
the blind.
Pair the remote with the motor.
See step 5.
Motor LED flashes red. The battery of the motor is empty. Charge the motor. See step 17.
Blind is not charging. Charger is not plugged in or does not work. Try a different charger or make sure the
charger is plugged in the outlet.
Multiple blinds respond to a
remote. (Unable to program
a single blind)
Multiple blinds are paired with a single
channel.
Pair the blind with a free channel to
program or use single select to program
the blind.
Blind moves in small steps. 1) No end limits are programmed.
2) Direct control is deactivated.
1) Program end limits. See step 7 - 10.
2) Activate direct control. See step 16.
Favourite position can not
be programmed.
No end limits are programmed. Program end limits.
See step 7 - 10.
Blind lowers too far. End limits are programmed incorrectly. Reprogram end limits. See step 7 - 10.
Blind moves in the opposite
direction.
The rotational direction has been
set incorrectly.
Change the rotational direction.
See step 6.
The blind keeps moving up
and down. The blind is in program mode. Press the program button on the motor to exit program mode.
Hold
17

MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
18

MOTION BLINDS CM-06 LI-ION TUBULAR MOTOR
Disclaimer:
© Copyright Coulisse
All rights reserved. No part of this publication may be reproduced,
stored in a retrieval system, or transmitted, in any form, by any
means, electronic, mechanical, photocopying, recording, digital or
otherwise without the written permission of the publisher.
Although this manual has been composed with the utmost
care, Coulisse B.V. does not accept any responsibility for damage
due to mistakes and/or faults in this manual.
Coulisse B.V. reserves the right to revise the manual and to revise
and/or change its content at any time, without obligation to
notify any person or entity of such revisions or changes.
The most recent version replaces older versions of this manual.
The most recent version is available at my.coulisse.com or by
contacting your Coulisse contact person.
We invite you to send remarks and comments about this manual
to Coulisse at [email protected].
For the latest information and updated
manuals visit rtube.nl/cm-06
English
19

MOTION CM-06 LI-ION ROHR MOTOR
Motoreigenschaften
Steuerungsoptionen
Support
CM-06
Li-ionbatteriebetriebene Rohrmotoren mit Zieh- und ferngesteuertem Betrieb
Support
Zieh-Steuerung
Betrieb mit
Zieh-Steuerung
Li-ion-Batterie
Integrierte
Lithium-Ionenbatterie
Fernsteuerung
Betrieb mit
Fernbedienung
USB wiederaufladbar
Wiederaufladbar mit
USB-C-Kabel
App-Steuerung
Betrieb mit der
MOTION-App
App-Steuerung
Betrieb mit der
MOTION-App
Kabellos
Kabellose
Installation
Konnektivität
Kompatibel mit
Heim- und Gebäude-
automatisierung
Geschwindigkeits-
kontrolle
Einheitliche
Rollgeschwindigkeit
Bidirektional
Beidseitige
Kommunikation für
Echtzeit-Reaktion
Video
Installation,
Programmierung und
Betrieb
rtube.nl/red1613
20