Motorola solutions PELCO IDL302-FXI User manual

Sarix Modular Camera
Installation Manual













Document number: C6718M
Publication date: 01/22

Sarix Modular Camera Installation Manual
C6718M | 01/22 2
Legal Notices
©2023,PelcoCorporation.Allrightsreserved.PELCO,thePELCOlogo,PELCOaretrademarksof
PelcoCorporation.Othernamesorlogosmentionedhereinmaybethetrademarksoftheirrespective
owners.Theabsenceofthesymbols™and®inproximitytoeachtrademarkinthisdocumentoratallis
notadisclaimerofownershipoftherelatedtrademark.PelcoCorporationprotectsitsinnovationswith
patentsissuedintheUnitedStatesofAmericaandotherjurisdictionsworldwide(seewww.pelco.com).
Unlessstatedexplicitlyandinwriting,nolicenseisgrantedwithrespecttoanycopyright,industrial
design,trademark,patentorotherintellectualpropertyrightsofPelcoCorporationoritslicensors.
Disclaimer
Thisdocumenthasbeencompiledandpublishedusingproductdescriptionsandspecificationsavailable
atthetimeofpublication.Thecontentsofthisdocumentandthespecificationsoftheproductsdiscussed
hereinaresubjecttochangewithoutnotice.PelcoCorporationreservestherighttomakeanysuch
changeswithoutnotice.NeitherPelcoCorporationnoranyofitsaffiliatedcompanies:(1)guaranteesthe
completenessoraccuracyoftheinformationcontainedinthisdocument;or(2)isresponsibleforyour
useof,orrelianceon,theinformation.PelcoCorporationshallnotberesponsibleforanylossesor
damages(includingconsequentialdamages)causedbyrelianceontheinformationpresentedherein.
PelcoCorporation
www.pelco.com
C6718M
Revision:3-EN
20230809

Sarix Modular Camera Installation Manual
C6718M | 01/22 3
Table of Contents
LegalNotices 2
Disclaimer 2
ImportantSafetyInformation 5
RegulatoryNotices 5
FCCNotice 6
DisposalandRecyclingInformation 6
Overview 7
MainUnit 7
FrontView 7
RearView 7
BottomView 8
DINRailMountView 9
MicroBulletImager 9
MicroBulletImagerView 9
L-BracketandMicroBulletView 10
RightAngleImager 11
RightAngleImagerView 11
OptionalAccessoryFlatBracketView 11
PreparingtheInstallation 12
ModularCameraSystemSetup 12
MountingandAimingVideoAnalyticsCameras 12
RecommendedUseofHDBNCCables 12
MainUnitInstallation 13
RequiredToolsandMaterials 13
MainUnitPackageContents 13
MountingonaFlatSurfaceorTable 13
MountingtheUnittoaWall 14
ChangingtheMountingFeetPosition 14
MountingtoaWall 15
MountingtheUnitonaDINRail 17
CableConnections 19
ConnectingtheEthernetandHDBNCCables 19
ConnectingExternalPower 19
ConnectingtoExternalAudioandI/ODevices 20
MicroBulletImagerInstallation 20
RequiredToolsandMaterials 20
ImagerPackageContents 21
UsingtheL-BracketMountingAdapter 21
PositioningtheMicroBulletImagerintheL-Bracket 21

Sarix Modular Camera Installation Manual
C6718M | 01/22 4
MountingtheL-Bracket 22
MountingThroughtheMountingSurface 24
MountingtoaThinMetalSheet 26
RightAngleImagerInstallation 28
RequiredToolsandMaterials 28
ImagerPackageContents 28
MountingThroughtheMountingSurface 28
InstallingwithMountingScrews 28
InstallingwiththeAdhesiveStrip 30
MountingtheImagerontoaSurface 31
InstallingwithMountingScrews 31
InstallingwiththeAdhesiveStrip 32
MountingThroughtheMountingSurfacewiththeBracket 33
InstallingwithMountingScrews 33
InstallingwiththeAdhesiveStrip 35
MountingtheImagerandBracketontoaSurface 36
InstallingwithMountingScrews 36
InstallingwiththeAdhesiveStrip 37
ConnectingtotheCamera 38
ConnectingExternalPower 38
Non-SeamlessFailover 39
InitializingaCameraUsernameandPassword 39
AssigninganIPAddress 39
AccessingtheLiveVideoStream 40
(Optional)ConfiguringOnboardStorage 40
ConfiguringtheCamera 40
ForMoreInformation 40
MainUnitLEDIndicators 40
ConnectionStatusLEDIndicator 40
TroubleshootingNetworkConnectionsandLEDBehavior 41
ImagerConnectionLEDIndicators 41
TroubleshootingImagerConnectionsandLEDBehavior 42
ResettingtoFactoryDefaultSettings 42
SettingtheIPAddressUsingtheARP/PingMethod 42
Cleaning 43
MicroBulletImagerLensBubble 43
ImagerandMainUnitBody 43
PelcoTroubleshootingContactInformation 43

Sarix Modular Camera Installation Manual
C6718M | 01/22 5
Important Safety Information
Thismanualprovidesinstallationandoperationinformationandprecautionsfortheuseofthisdevice.
Incorrectinstallationcouldcauseanunexpectedfault.Beforeinstallingthisequipmentreadthismanual
carefully.Pleaseprovidethismanualtotheowneroftheequipmentforfuturereference.
ThisWarningsymbolindicatesthepresenceofdangerousvoltagewithinandoutsidethe
productenclosurethatmayresultinariskofelectricshock,seriousinjuryordeathto
personsifproperprecautionsarenotfollowed.
ThisCautionsymbolalertstheusertothepresenceofhazardsthatmaycauseminoror
moderateinjurytopersons,damagetopropertyordamagetotheproductitselfifproper
precautionsarenotfollowed.
Failuretoobservethefollowinginstructionsmayresultinsevereinjuryordeath.
lInstallationmustbeperformedbyqualifiedpersonnelonly,andmustconformtoalllocalcodes.
lESDtothecamerawhenitisoperatingcouldcauseatemporarylossofvideo.Whenservicingthe
camera,followtheappropriateESDmitigationprocedures.Theoperatorshouldremoveanystatic
bygroundingthemselvesbeforeservicingthecamera.
lThisproductisintendedtobesuppliedbyaULListedPowerUnitmarked“Class2”or“LPS”or
“LimitedPowerSource”withoutputrated12VDC,11.5Wmin.orPoE,11.5Wminimum.
lDonotconnectdirectlytomainspowerforanyreason.

Failuretoobservethefollowinginstructionsmayresultininjurytopersonsordamagetothe
device.
lDonotexposethecameradirectlytohighlevelsofx-ray,laser,orUVradiation.Directexposure
maycausepermanentdamagetotheimagesensor.
lDonotinstallnearanyheatsourcessuchasradiators,heatregisters,stoves,orothersourcesof
heat.
lDonotsubjectthedevicecablestoexcessivestress,heavyloadsorpinching.
lDonotopenordisassemblethedevice.Therearenouserserviceableparts.
lReferalldeviceservicingtoqualifiedpersonnel.Servicingmayberequiredwhenthedevicehas
beendamaged(suchasfromaliquidspillorfallenobjects),hasbeenexposedtorainormoisture,
doesnotoperatenormally,orhasbeendropped.
lDonotusestrongorabrasivedetergentswhencleaningthedevicebody.
lUseonlyaccessoriesrecommendedbyPelco.
Regulatory Notices
Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:
(1)Thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptanyinterference
received,includinginterferencethatmaycauseundesiredoperation.
ThisClassAdigitalapparatuscomplieswithCanadianICES-003.
ThisdevicecomplieswithEN60529IP66rating.

Sarix Modular Camera Installation Manual
C6718M | 01/22 6
ThemicrobulletcameraimagermodelsIDL302-FXIandIDL502-FXIcomplywithEN60529IP66rating.
FCC Notice
ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassAdigitaldevice,pursuant
toPart15oftheFCCrules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmful
interferencewhentheequipmentisoperatedinacommercialenvironment.Thisequipmentgenerates,
usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedinaccordancewiththe
instructionmanual,maycauseharmfulinterferencetoradiocommunications.Operationofthis
equipmentinaresidentialareaislikelytocauseharmfulinterferenceinwhichcasetheuserwillbe
requiredtocorrecttheinterferenceathisownexpense.
ChangesormodificationsmadetothisequipmentnotexpresslyapprovedbyPelcoCorporationor
partiesauthorizedbyPelcoCorporationcouldvoidtheuser’sauthoritytooperatethisequipment.
Disposal and Recycling Information
Whenthisproducthasreachedtheendofitsusefullife,pleasedisposeofitaccordingtoyourlocal
environmentallawsandguidelines.
European Union:
Thissymbolmeansthataccordingtolocallawsandregulationsyourproductshouldbedisposedof
separatelyfromhouseholdwaste.Whenthisproductreachesitsendoflife,takeittoacollectionpoint
designatedbylocalauthorities.Somecollectionpointsacceptproductsforfree.Theseparatecollection
andrecyclingofyourproductatthetimeofdisposalwillhelpconservenaturalresourcesandensurethat
itisrecycledinamannerthatprotectshumanhealthandtheenvironment.

Sarix Modular Camera Installation Manual
C6718M | 01/22 7
Overview
Main Unit
Front View
1. microSD card slots (x2)
AcceptsuptotwomicroSDcardsforonboardstorage.InstallmicroSDcardssothemetalcontacts
arefacingtowardsthemountingfeet.Formoreinformation,see(Optional) Configuring Onboard
Storage.
2. Firmware revert button
Resetsthecameratoitsfactorydefaultsettings.
Rear View

Sarix Modular Camera Installation Manual
C6718M | 01/22 8
1. Imager connection LEDs (x2)
LEDsthatprovideinformationaboutimagerdeviceconnections.Formoreinformation,see
Imager Connection LED Indicators.
2. Imager HD BNC connectors (x2)
HDBNCcableconnectionsforconnectingthemodularcameramainunittouptotwoimager
modules.
3. Micro USB port
Reservedforfutureuse.
4. I/O connector block
Providesconnectionstoexternalinput/outputandaudiodevices.
5. Ethernet port
AcceptsanEthernetconnectiontoanetwork.Servercommunicationandimagedata
transmissionoccursoverthisconnection.Alsoreceivespowerwhenitisconnectedtoanetwork
thatprovidesPoweroverEthernet.
6. Power connector block
AcceptsanexternalDCpowerconnectionwhenPoweroverEthernetisnotavailable.
7. Link LED indicator
AmberLEDindicatesifthereisanactiveconnectionintheEthernetport.
8. Connection status LED indicator
GreenLEDprovidesinformationaboutdeviceoperation.Formoreinformation,seeConnection
Status LED Indicator.
Bottom View
1. Mounting feet (x2)
Mainunitmountingfeetthatcanbeusedforatabletopinstallationorawallmount.Themounting
feetareremovedforaDINrailmountedunit.
2. Mounting feet screws (x4)
Screwsforfasteningthemountingfeettothemainunit.
3. DIN rail mount screw hole
ScrewholeusedforfasteningtheDINrailmounttothemainunit.

Sarix Modular Camera Installation Manual
C6718M | 01/22 9
DIN Rail Mount View
1. DIN rail mount
MountusedforsecuringthemainunittoaDINrail.Orderedseparately(BRKTMD-1001).
2. DIN rail mount screw
ScrewusedforfasteningtheDINrailmounttothemainunit.
Micro Bullet Imager
Micro Bullet Imager View
1. Camera mount
Providesmountingpointfortheimager.MountacceptsM3screws.
2. Lens collar
Removablelenscollar.
3. Camera lens
Lensthatcapturesthevideoimage.

Sarix Modular Camera Installation Manual
C6718M | 01/22 10
L-Bracket and Micro Bullet View
1. L-bracket mounting adapter
L-bracketformountingthemicrobulletimagertoaflatsurface.
2. L-bracket thumbscrew
Thumbscrewtoadjustthepositionorangleofthemicrobulletimager.
3. L-bracket micro bullet mount
MountingcollarforconnectingthemicrobulletimagertotheL-bracketmount.
4. HD BNC connector
HDBNCcableconnectionforconnectingthemicrobulletimagertothemodularcameramainunit.
5. Mounting screws (x2)
ScrewstofastentheL-bracketmounttothemountingsurface.

Sarix Modular Camera Installation Manual
C6718M | 01/22 11
Right Angle Imager
Right Angle Imager View
1. Bracket clip retainers (x4)
Bracketclipretainersforfasteningtheoptionalaccessoryflatbrackettotherightangleimager.
2. Camera pinhole lens
Pinhole-sizedlensthatcapturesthevideoimage.
3. Mounting slots (x2)
Slotsforfasteningtherightangleimagertoamountingsurface.
4. HD BNC connector
HDBNCcableconnectionforconnectingtherightangleimagertothemodularcameramainunit.
Optional Accessory Flat Bracket View
1. Lens opening
Openinginthebracketforlenstobepositioned.
2. Bracket mounting clips (x2)
Clipstoconnectthebrackettotheclipretainersontherightangleimager.
3. Mounting slots (x2)
Slotsforfasteningthebracketandrightangleimagertoamountingsurfacewiththeprovided
mountingscrews.

Sarix Modular Camera Installation Manual
C6718M | 01/22 12
Preparing the Installation
Modular Camera System Setup
Themodularcameraprovidesmaximumflexibilitytocombinedifferentimagermodules,mounting
options,andcableconfigurationstosuitanynumberofinstallationscenarios.Eitherofthe2camera
imagermodulescanbeconnectedtothemodularcameramainunitformaximumversatilityandoptimal
installations.
Thefollowingarerequiredtosetupyourmodularcamerasystem:
lAtleastonemodularcameramainunit;IDL0-PU2
lUptotwoimagermodulespermainunit:
lMicrobulletimager:IDL502-FXIorIDL302-FXI
lRightangleimager:IDL303PHI
lOneHDBNCcableforeachimagermodule:
l2m(6.5ft)cable:CBL2M-1001
l5m(16.4ft)cable:CBL5M-1001
HDBNCcablesshouldnotbesharplybent,twisted,orcrimpedtoensureoptimalvideotransmission
quality.Formoreinformation,seeRecommended Use of HD BNC Cables.
Mounting and Aiming Video Analytics Cameras
WheninstallingaPelcoSmartanalyticscamera,followthelistedmountingandaimingrecommendations
tomaximizethecamera'sanalyticscapabilities:
lThecamerashouldbeinstalledabove2.74m(9feet).
Thecameraalsosupportslowerinstallationsthatareintheeye-levelrangeof1.21mto2.13m(4-
7ftrange).Ifinstallinginthislowerrange,makesuretoselecttheIndoorClose-upmodewhen
configuringtheanalytics.Formoreinformation,seetheDesigning a Site with Pelco Smart
Analytics Guide,availableonthewebsite.
lThecamerashouldtiltdownwardsnomorethan45degrees.
lThecameraimageshouldbelevelwiththehorizonline.
lThecamerashouldbemountedtoastablesurfacetominimizethephysicalmovementofthe
cameraafterinstallation.
Formoredetails,seetheDesigning a Site with Pelco Smart Analytics Guide.Thisdocumentisavailable
onthePelcowebsite.
Recommended Use of HD BNC Cables
HDBNCcablesarecapableoftransmittinghighresolutionvideofromanimagermoduletothemainunit
whilealsopoweringtheimagermodule.ForoptimalperformanceoftheHDBNCcableandtoreduce
signaldegredation,thecableshouldneverbebentorcurvedanylessthana0.5"(12.7mm)radiuscircle.

Sarix Modular Camera Installation Manual
C6718M | 01/22 13
OneconnectoroneachHDBNCcableisIP66ratedforprotectionfromdustandwateringress.TheIP66
connectorshouldbeusedwiththemicrobulletimagertosetupanIP66rated,weather-protected
connectionforthatimager.
Thenon-IPratedendoftheHDBNCisusedtoconnecttothemainunit,whichshouldbeinstalledina
dryandsecurelocation.
OnlythemicrobulletimagerisIP66-rated.Therightangleimagershouldbeinstalledinadryandsecure
location.
Main Unit Installation
Required Tools and Materials
Thefollowingtoolsarerequiredtocompletetheinstallationbutarenotincludedinthepackage:
lAtleastonemodularcameraimagerandanHDBNCcable.Formoreinformation,seeModular
Camera System Setup.
lSmallslottedscrewdriverwith5/64”or2mmbladewidth—forconnectingpowerwhennotusing
PoweroverEthernet
lNo.2Phillipsscrewdriver—forattachingcameratoamountingsurface
Main Unit Package Contents
Ensurethesurfacemountedcamerapackagecontainsthefollowing:
lPelcoSarixModularcameramainunit
lBaseMountingTemplatesticker
lPowerandI/Oterminalblock
l4xscrewsandanchors—forsecuringtheunittothemountingsurface.
TheoptionalDINrailmountingaccessory,BRKTMD-1001,canalsobeorderedseparately.
Mounting on a Flat Surface or Table
Ifthemodularcameramainunitisinstalledinasecurelocationwhereitwouldnotbebumpedorjostled,
youcanplacetheunitonaflatshelfortabletop.Makesuretoinstallthemainunitinalocationwherethe
unitandconnectedcableswillbesecureandundisturbed.
1. Theunitisshippedwiththemountingfeetinthetabletopmountingposition.
Ifthemountingfeetarenotorientedasshownbelow,removethefourscrewsandre-installthe
mountingfeetinthecorrectorientation.Formoreinformation,seeChanging the Mounting Feet
Position.

Sarix Modular Camera Installation Manual
C6718M | 01/22 14
2. Placetheunitonaflatsurfaceandconnecttherequiredcables.Formoreinformation,seeCable
Connections.

Mounting the Unit to a Wall
Performthefollowingstepstoinstallthemodularcameramainunitonaverticalwall.Thismounting
optionisidealforkeepingtheunitandit'scablesoutoftheway.
Changing the Mounting Feet Position
Theunitisshippedwiththemountingfeetinthetabletopmountingposition.Tomounttheunittoawall,
youmustfirstchangetheorientationmountingfeettomatchtheimagebelow.

Sarix Modular Camera Installation Manual
C6718M | 01/22 15
1. Removethe4screwsholdingthemountingfeetinposition.
2. Rotatethemountingfeet180°sotheymatchtheimagebelow.Connectthemountingfeettothe
mainunitusingthe4screws.
Mounting to a Wall
1. UsingtheMountingTemplate,drill4pilotholesintothemountingsurfaceforthemountingscrews.
Discardthemountingtemplatewhenyouarefinished.
Beawarethatthecableswillbecomingfromoneofthetwoendsofthemountingtemplatewhere
themountingscrewsarelocated.

Sarix Modular Camera Installation Manual
C6718M | 01/22 16
2. Hammerthesuppliedplasticanchorsintotheholes.
3. Alignthemountingslotsontheunit'smountingfeettothedrilledpilotholesandusetheprovided
self-tappingscrewstosecuretheunittothemountingsurface.
4. Connecttherequiredcables.Formoreinformation,seeCable Connections.

Sarix Modular Camera Installation Manual
C6718M | 01/22 17
Mounting the Unit on a DIN Rail
ADINrailisastandardmetalrailthatiswidelyusedformountingequipment,suchasonanequipment
rackorinastorageroom.Ifyouareinstallingthemodularcameramainunitinalocationwithaccessible
DINrails,usetheDINrailmounttomounttheunit.
TheDINrailmount,BRKTMD-1001,isanoptionalaccessoryandmustbeorderedseparately.
1. Removethe4screwsholdingthemountingfeetinposition.ThesepartsarenotrequiredforaDIN
railmountedmainunit.

Sarix Modular Camera Installation Manual
C6718M | 01/22 18
2. AligntheDINrailmountwiththecenterscrewholeandfastenitinplacewiththescrewprovided.
3. PushthespringportionoftheDINrailmountontoonesideoftheDINrail.
4. RotatetheotherendoftheunittowardstheDINrailuntilthemountsnapsintoplace.
5. Connecttherequiredcables.Formoreinformation,seeCable Connections.

Sarix Modular Camera Installation Manual
C6718M | 01/22 19
Cable Connections
Connecting the Ethernet and HD BNC Cables
RefertothediagramsintheMainUnitOverviewsectionforthelocationofthedifferentconnectorsand
statusLEDsonthemainunit.
1. Connectanetworkcabletotheunit'sEthernetport(RJ45connector).
2. ConnectanHDBNCcableforthenumberofimagermodulesyouareinstalling.Uptotwoimagers
canbeconnectedtoeachmainunit.
3. Ifthecameraisconnectedtoanyexternaldevices,connecttheI/OoraudiocablestotheI/O
connectorblock.Formoreinformation,seeConnecting to External Audio and I/O Devices.
4. Powerthecamerausingoneofthefollowingmethods:
lPoweroverEthernet(PoE)Class3—IfPoEisavailable,theLEDswillturnon.PoE,IEEE
802.3afClass3issufficienttopowerthemodularcameramainunitanduptotwoconnected
imagers.
lExternalPower—Connectanexternal12VDCpowersourcetothepowerconnectorblock.
Formoreinformation,seeConnecting External Power.
ThestatusLEDsturnonwhenthecamerareceivespower.
Connecting External Power
IfPoEisnotavailable,thecameraneedstobepoweredthroughtheremovablepowerconnectorblock.
RefertotheMainUnitOverviewsectionforthelocationofthepowerconnectorblock.
Toconnectpowertothepowerconnectorblock,completethefollowingsteps:
1. Removethepowerconnectorblockfromthecamera.
2. Removetheinsulationfrom¼”(6mm)ofthepowerwires.Donotnickordamagethewires.
3. Insertthetwopowerwiresintothetwoterminalsonthepowerconnectorblock.Theconnection
canbemadewitheitherpolarity.
Useasmallslotted(5/64”or2mmbladewidth)screwdrivertoloosenandtightentheterminals.
4. Attachthepowerconnectorblockbackintothecamera.
ThisproductisintendedtobesuppliedbyaULListedPowerUnitmarked“Class2”or“LPS”or
“LimitedPowerSource”withoutputrated12VDC,11.5Wmin.orPoE,11.5Wmin.
Non-Seamless Failover
lIfthecamerahaspoweravailablefrombothanexternalAuxpowersupplyandaPoEPSE(Power
SourcingEquipment)device,thecamerawilldrawpowerfromAux.
lWhenthecameraisusingAuxpower,PoEpowernegotiationisinhibited.
lIfthecameralosesAuxpower,thecamerawillpower-offwhilewaitingtotransitiontoPoEpower.
lIftheexternalAuxpowerre-energizes,thecameramightrebootwhiletransitioningbacktousing
Auxpower.ThecameramightnotrebootiftheexternalAuxpowersupplyreactsquicklyenough
totheincreaseinload.
lEnsurethatsufficientpowerismanuallyreservedonthePSE,asthecamerawillnotrequestPoE
poweruntilthecameralosesAuxpower.

Sarix Modular Camera Installation Manual
C6718M | 01/22 20
Connecting to External Audio and I/O Devices
ExternalaudioandI/OdevicesareconnectedtothecamerathroughtheaudioandI/Oconnectorblock.
Thepinoutfortheconnectorblockisshowninthefollowingdiagram:
1. DigitalInput—Toactivate,connecttheInputtotheGroundpin.Todeactivate,leave
disconnectedorapplybetween3-15V.
2. Ground
3. DigitalOutput—Whenactive,OutputisinternallyconnectedwiththeGroundpin.Circuitisopen
wheninactive.Maximumloadis25VDC,120mA.
4. AudioOutput(linelevel)
Anexternalpoweramplifiershouldbeusedwhenconnectingspeakersandmicrophones,as
showninthediagram.
5. AudioGround
6. AudioInput(linelevel)
l*—Relay
l**—Switch
lM—Microphone
lS—Speaker
Micro Bullet Imager Installation
Required Tools and Materials
Thefollowingtoolsarerequiredtocompletetheinstallationbutarenotincludedinthepackage:
lAmodularcameramainunitandanHDBNCcable.Formoreinformation,seeModular Camera
System Setup.
lAppropriatetoolforcuttingtheentryholeinthemountingsurface
lNo.2Phillipsscrewdriver—forattachingtheimagerorbrackettoamountingsurface