Motorola Horizonmacro outdoor User manual

31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION i
GSM-204-423
Installation & Configuration
Horizon macro outdoor
Motorola 1999-2001
All Rights Reserved
Printed in the U.K.

GSM-204-423
31st Oct 01
ii Installation & Configuration: Horizon
macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A
Copyrights, notices and trademarks
Copyrights
The Motorola products described in this document may include copyrighted Motorola computer
programs stored in semiconductor memories or other media. Laws in the United States and other
countries preserve for Motorola certain exclusive rights for copyright computer programs, including the
exclusive right to copy or reproduce in any form the copyright computer program. Accordingly, any
copyright Motorola computer programs contained in the Motorola products described in this document
may not be copied or reproduced in any manner without the express written permission of Motorola.
Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by
implication, estoppel or otherwise, any license under the copyrights, patents or patent applications of
Motorola, except for the rights that arise by operation of law in the sale of a product.
Restrictions The software described in this document is the property of Motorola. It is furnished under a license
agreement and may be used and/or disclosed only in accordance with the terms of the agreement.
Software and documentation are copyright materials. Making unauthorized copies is prohibited by
law. No part of the software or documentation may be reproduced, transmitted, transcribed, stored
in a retrieval system, or translated into any language or computer language, in any form or by any
means, without prior written permission of Motorola.
Accuracy While reasonable efforts have been made to assure the accuracy of this document, Motorola
assumes no liability resulting from any inaccuracies or omissions in this document, or from the use
of the information obtained herein. Motorola reserves the right to make changes to any products
described herein to improve reliability, function, or design, and reserves the right to revise this
document and to make changes from time to time in content hereof with no obligation to notify any
person of revisions or changes. Motorola does not assume any liability arising out of the application
or use of any product or circuit described herein; neither does it convey license under its patent
rights of others.
Trademarks
and MOTOROLA are registered trademarks of Motorola Inc.
Aspira, Intelligence Everywhere, M-Cell and Taskfinder are trademarks of Motorola Inc.
All other brands and corporate names are trademarks of their respective owners.

GSM-204-423 Issue status of this manual
31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION 1
Issue status of this manual
Introduction
The following shows the issue status of this manual since it was first released.
Version
information
The following lists the versions of this manual in order of manual issue:
Manual
issue Date of
issue Remarks
O12th Jan 00 Original issue.
A31st Oct 01 Updated to include details for GSM850 and
PCS1900.
Resolution of
Service
Requests
The following Service Requests are now resolved in this manual:
Service
Request GMR
Number Remarks
N/A N/A

GSM-204-423
General information
31st Oct 01
2Installation & Configuration: Horizon
macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A
General information
Important
notice
If this manual was obtained when attending a Motorola training course, it will not
be updated or amended by Motorola. It is intended for TRAINING PURPOSES
ONLY. If it was supplied under normal operational circumstances, to support a
major software release, then corrections will be supplied automatically by
Motorola in the form of General Manual Revisions (GMRs).
Purpose
Motorola cellular communications manuals are intended to instruct and assist
personnel in the operation, installation and maintenance of the Motorola cellular
infrastructure equipment and ancillary devices. It is recommended that all
personnel engaged in such activities be properly trained by Motorola.
WARNING Failure to comply with Motorola’s operation, installation
and maintenance instructions may, in exceptional
circumstances, lead to serious injury or death.
These manuals are not intended to replace the system and equipment training
offered by Motorola, although they can be used to supplement and enhance the
knowledge gained through such training.
About this
manual
The manual contains: technical description of the hardware elements,
installation and configuration information, repair procedures and parts lists for
the Horizon
macro outdoor equipment in Motorola GSM850, GSM/EGSM900,
DCS1800 and PCS1900 systems.
The objectives are to help the reader:
Gain an overview of the equipment and interconnection of components.
Understand the function and operation of all components.
Recognize configurations, and equivalent module functions to M-Cell 6 (a
previous BTS type, interchangeable with Horizon
macro ).
Be aware of the warnings (potential for harm to people) and cautions
(potential for harm to equipment) to be observed when working on the
equipment.
Understand how to install and commission the equipment.
Understand how to inspect, maintain, and repair the equipment.
Have a clear ready reference for all dedicated information in one manual.

GSM-204-423 General information
31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION 3
Cross
references
Throughout this manual, cross references are made to the chapter numbers and
section names. The section name cross references are printed bold in text.
This manual is divided into uniquely identified and numbered chapters that, in
turn, are divided into sections. Sections are not numbered, but are individually
named at the top of each page, and are listed in the table of contents.
Text
conventions
The following conventions are used in the Motorola cellular infrastructure
manuals to represent keyboard input text, screen output text and special key
sequences.
Input
Characters typed in at the keyboard are shown like
this.
Output
Messages, prompts, file listings, directories, utilities, and
environmental variables that appear on the screen are shown like
this.
Special key sequences
Special key sequences are represented as follows:
CTRL–c Press the Control and c keys at the same time.
ALT–f Press the Alt and f keys at the same time.
|Press the pipe symbol key.
CR or RETURN Press the Return (Enter) key. The Return key is
identified with the ↵symbol on both the PC and
the Sun keyboards. The keyboard Return key
may also be identified with the word Return.

GSM-204-423
First aid in case of electric shock
31st Oct 01
4Installation & Configuration: Horizon
macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A
First aid in case of electric shock
Warning
WARNING Do not touch the victim with your bare hands until the
electric circuit is broken.
Switch off. If this is not possible, protect yourself with
dry insulating material and pull or push the victim clear of
the conductor.
Artificial
respiration
In the event of an electric shock it may be necessary to carry out artificial
respiration. Send for medical assistance immediately.
Burns treatment
If the patient is also suffering from burns, then, without hindrance to artificial
respiration, carry out the following:
1. Do not attempt to remove clothing adhering to the burn.
2. If help is available, or as soon as artificial respiration is no longer required,
cover the wound with a dry dressing.
3. Do not apply oil or grease in any form.

GSM-204-423 Reporting safety issues
31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION 5
Reporting safety issues
Introduction
Whenever a safety issue arises, carry out the following procedure in all
instances. Ensure that all site personnel are familiar with this procedure.
Procedure
Whenever a safety issue arises:
1. Make the equipment concerned safe, for example, by removing power.
2. Make no further attempt to tamper with the equipment.
3. Report the problem directly to the Customer Network Resolution Centre,
Swindon [phone] or China [phone] (telephone) and
follow up with a written report by fax, Swindon [phone] or
China [phone] (fax).
4. Collect evidence from the equipment under the guidance of the Customer
Network Resolution Centre.

GSM-204-423
Warnings and cautions
31st Oct 01
6Installation & Configuration: Horizon
macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A
Warnings and cautions
Introduction
The following describes how warnings and cautions are used in this manual and
in all manuals of this Motorola manual set.
Warnings
Definition of Warning
A warning is used to alert the reader to possible hazards that could cause loss
of life, physical injury, or ill health. This includes hazards introduced during
maintenance, for example, the use of adhesives and solvents, as well as those
inherent in the equipment.
Example and format
WARNING Do not look directly into fibre optic cables or data in/out
connectors. Laser radiation can come from either the data
in/out connectors or unterminated fibre optic cables
connected to data in/out connectors.
Cautions
Definition of Warning
A caution means that there is a possibility of damage to systems, software or
individual items of equipment within a system. However, this presents no danger
to personnel.
Example and format
CAUTION Do not use test equipment that is beyond its calibration
due date when testing Motorola base stations.

GSM-204-423 General warnings
31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION 7
General warnings
Introduction Observe the following warnings during all phases of operation, installation and
maintenance of the equipment described in the Motorola manuals. Failure to
comply with these warnings, or with specific warnings elsewhere in the Motorola
manuals, violates safety standards of design, manufacture and intended use of
the equipment. Motorola assumes no liability for the customer’s failure to comply
with these requirements.
Warning labels Personnel working with or operating Motorola equipment must comply with any
warning labels fitted to the equipment. Warning labels must not be removed,
painted over or obscured in any way.
Specific
warnings Warnings particularly applicable to the equipment are positioned on the
equipment and within the text of this manual. These must be observed by all
personnel at all times when working with the equipment, as must any other
warnings given in text, on the illustrations and on the equipment.
High voltage Certain Motorola equipment operates from a dangerous high voltage of 230 V
ac single phase or 415 V ac three phase supply which is potentially lethal.
Therefore, the areas where the ac supply power is present must not be
approached until the warnings and cautions in the text and on the equipment
have been complied with.
To achieve isolation of the equipment from the ac supply, the ac input isolator
must be set to off and locked.
Within the United Kingdom (UK) regard must be paid to the requirements of the
Electricity at Work Regulations 1989. There may also be specific country
legislation which need to be complied with, depending on where the equipment
is used.
RF radiation High RF potentials and electromagnetic fields are present in the base station
equipment when in operation. Ensure that all transmitters are switched off when
any antenna connections have to be changed. Do not key transmitters
connected to unterminated cavities or feeders.
Refer to the following standards:
ANSI IEEE C95.1-1991, IEEE Standard for Safety Levels with Respect to
Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to
300 GHz
.
CENELEC 95 ENV 50166-2, Human Exposure to Electromagnetic Fields
High Frequency (10 kHz to 300 GHz)
.

GSM-204-423
General warnings
31st Oct 01
8Installation & Configuration: Horizon
macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A
Laser radiation
Do not look directly into fibre optic cables or optical data in/out connectors.
Laser radiation can come from either the data in/out connectors or unterminated
fibre optic cables connected to data in/out connectors.
Lifting
equipment
When dismantling heavy assemblies, or removing or replacing equipment, the
competent responsible person must ensure that adequate lifting facilities are
available. Where provided, lifting frames must be used for these operations.
When equipments have to be manhandled, reference must be made to the
Manual Handling of Loads Regulations 1992 (UK) or to the relevant manual
handling of loads legislation for the country in which the equipment is used.
Do not ... ... substitute parts or modify equipment.
Because of the danger of introducing additional hazards, do not install substitute
parts or perform any unauthorized modification of equipment. Contact Motorola
if in doubt to ensure that safety features are maintained.
Battery supplies
Do not wear earth straps when working with standby battery supplies.
Toxic material
Certain equipment may incorporate components containing the highly toxic
material Beryllium or its oxide Beryllia or both. These materials are especially
hazardous if:
Beryllium materials are absorbed into the body tissues through the skin,
mouth, or a wound.
The dust created by breakage of Beryllia is inhaled.
Toxic fumes are inhaled from Beryllium or Beryllia involved in a fire.
Beryllium warning labels are fitted to equipment incorporating Beryllium or
Beryllium Oxide. Observe all safety instructions given on warning labels.
Beryllium Oxide is used within some components as an electrical insulator.
Captive within the component it presents no health risk whatsoever. However, if
the component should be broken open or burnt, the Beryllium Oxide, in the form
of dust or fumes, could be released, with the potential for harm.
Lithium
batteries
Lithium batteries, if subjected to mistreatment, may burst and ignite. Defective
lithium batteries must not be removed or replaced. Any boards containing
defective lithium batteries must be returned to Motorola for repair.

GSM-204-423 General cautions
31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION 9
General cautions
Introduction
Observe the following cautions during operation, installation and maintenance of
the equipment described in the Motorola manuals. Failure to comply with these
cautions or with specific cautions elsewhere in the Motorola manuals may result
in damage to the equipment. Motorola assumes no liability for the customer’s
failure to comply with these requirements.
Caution labels
Personnel working with or operating Motorola equipment must comply with any
caution labels fitted to the equipment. Caution labels must not be removed,
painted over or obscured in any way.
Specific
cautions
Cautions particularly applicable to the equipment are positioned within the text
of this manual. These must be observed by all personnel at all times when
working with the equipment, as must any other cautions given in text, on the
illustrations and on the equipment.
Fibre optics
The bending radius of all fibre optic cables must not be less than 30 mm.
Static discharge
Motorola equipment contains CMOS devices that are vulnerable to static
discharge. Although the damage caused by static discharge may not be
immediately apparent, CMOS devices may be damaged in the long term due to
static discharge caused by mishandling. Wear an approved earth strap when
adjusting or handling digital boards.
See Devices sensitive to static for further information.

GSM-204-423
Devices sensitive to static
31st Oct 01
10 Installation & Configuration: Horizon
macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A
Devices sensitive to static
Introduction
Certain metal oxide semiconductor (MOS) devices embody in their design a thin
layer of insulation that is susceptible to damage from electrostatic charge. Such
a charge applied to the leads of the device could cause irreparable damage.
These charges can be built up on nylon overalls, by friction, by pushing the
hands into high insulation packing material or by use of unearthed soldering
irons.
MOS devices are normally despatched from the manufacturers with the leads
shorted together, for example, by metal foil eyelets, wire strapping, or by
inserting the leads into conductive plastic foam. Provided the leads are shorted
it is safe to handle the device.
Special
handling
techniques
In the event of one of these devices having to be replaced, observe the
following precautions when handling the replacement:
Always wear an earth strap which must be connected to the electrostatic
point (ESP) on the equipment.
Leave the short circuit on the leads until the last moment. It may be
necessary to replace the conductive foam by a piece of wire to enable the
device to be fitted.
Do not wear outer clothing made of nylon or similar man made material. A
cotton overall is preferable.
If possible work on an earthed metal surface. Wipe insulated plastic work
surfaces with an anti-static cloth before starting the operation.
All metal tools should be used and when not in use they should be placed
on an earthed surface.
Take care when removing components connected to electrostatic sensitive
devices. These components may be providing protection to the device.
When mounted onto printed circuit boards (PCBs), MOS devices are normally
less susceptible to electrostatic damage. However PCBs should be handled with
care, preferably by their edges and not by their tracks and pins, they should be
transferred directly from their packing to the equipment (or the other way
around) and never left exposed on the workbench.

GSM-204-423 Motorola GSM manual set
31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION 11
Motorola GSM manual set
Introduction
The following manuals provide the information needed to operate, install and
maintain the Motorola equipment.
Generic GSM
manuals
The following are the generic manuals in the GSM manual set, these manuals
are release dependent:
Classification
number Name Order number
GSM-100-101 System Information: General 68P02901W01. . . . . . . . . . . . . . . . . . .
GSM-100-201 Operating Information: GSM System Operation 68P02901W14. . .
GSM-100-202 Operating Information: OMC-R System
Administration 68P02901W19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GSM-100-313 Technical Description: OMC-R Database Schema 68P02901W34.
GSM-100-320 Technical Description: BSS Implementation 68P02901W36. . . . . . .
GSM-100-321 Technical Description: BSS Command Reference 68P02901W23.
GSM-100-403 Installation & Configuration: GSM System
Configuration 68P02901W17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GSM-100-423 Installation & Configuration: BSS Optimization 68P02901W43. . . .
GSM-100-413 Installation & Configuration: OMC-R Clean Install 68P02901W47. .
GSM-100-501 Maintenance Information: Alarm Handling at
the OMC-R 68P02901W26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GSM-100-520 Maintenance Information: BSS Timers 68P02901W58. . . . . . . . . . .
GSM-100-521 Maintenance Information: Device State Transitions 68P02901W57
GSM-100-523 Maintenance Information: BSS Field
Troubleshooting 68P02901W51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GSM-100-503 Maintenance Information: GSM Statistics
Application 68P02901W56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GSM-100-721 Software Release Notes: BSS/RXCDR 68P02901W72. . . . . . . . . .
GSM-100-712 Software Release Notes: OMC-R System 68P02901W74. . . . . . . .

GSM-204-423
Motorola GSM manual set
31st Oct 01
12 Installation & Configuration: Horizon
macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A
Related GSM
manuals The following are related Motorola GSM manuals:
Classification
number Name Order number
GSM-001-103 System Information: BSS Equipment Planning 68P02900W21. . . .
GSM-002-103 System Information: DataGen 68P02900W22. . . . . . . . . . . . . . . . . .
GSM-002-703 Software Release Notes: DataGen 68P02900W76. . . . . . . . . . . . . .
GSM-005-103 System Information: GSM Advance Operational
Impact 68P02900W25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GSM-008-103 System Information: Network Health Analyst 68P02900W36. . . . . .
GSM-008-703 Software Release Notes: Network Health Analyst 68P02900W77.
GSM-TOOLS-001 System Information: Cell Optimization (COP) 68P02900W90. . . . .
GSM-TOOLS-002 System Information: Motorola Analysis and
Reporting System (MARS) 68P02900W94. . . . . . . . . . . . . . . . . . . . .
GSM-TOOLS-701 Software Release Notes: Cell Optimization (COP) 68P02900W69.
GSM-TOOLS-702 Software Release Notes: Motorola Analysis and
Reporting System (MARS) 68P02900W68. . . . . . . . . . . . . . . . . . . . .
GSM-006-202 Operating Information: OMC-R System
Administration (OSI) 68P02901W10. . . . . . . . . . . . . . . . . . . . . . . . . .
GSM-006-413 Installation & Configuration: OSI Clean Install 68P02901W39. . . . .
GSM-006-712 Software Release Notes: OMC-R OSI System 68P02901W70. . . .
Generic GPRS
manuals The following are the generic manuals in the GPRS manual set, these manuals
are release dependent:
Classification
number Name Order number
GPRS-300-101 System Information: GPRS Overview 68P02903W01. . . . . . . . . . . .
GPRS-300-202 Operating Information: OMC-G System
Administration 68P02903W03. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GPRS-300-222 Operating Information: GSN System Administration 68P02903W37
GPRS-300-313 Technical Description: OMC-G Database Schema 68P02903W46.
GPRS-300-321 Technical Description: GSN Command Reference 68P02903W18.
GPRS-300-423 Installation & Configuration: GSN Clean Install 68P02903W47. . . .
GPRS-300-413 Installation & Configuration: OMC-G Clean Install 68P02903W04.
GPRS-300-501 Maintenance Information: Alarm Handling at
the OMC-G 68P02903W19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GPRS-300-503 Maintenance Information: GSN Statistics
Application 68P02903W20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GPRS-300-722 Software Release Notes: GSN System 68P02903W76. . . . . . . . . .
GPRS-300-712 Software Release Notes: OMC-G System 68P02903W70. . . . . . . .
Related GPRS
manuals The following are related Motorola GPRS manuals:
Classification
number Name Order number
GPRS-001-103 System Information: GPRS Equipment Planning 68P02903W02. .
GPRS-005-103 System Information: GSN Advance Operational
Impact 68P02903W38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

GSM-204-423 Motorola GSM manual set
31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION 13
BSS service
manuals
The following are the Motorola Base Station service manuals, these manuals
are not release dependent. The internal organization and makeup of service
manual sets may vary, they may consist of from one to four separate manuals,
but they can all be ordered using the overall catalogue number shown below:
Classification
number Name Order number
GSM-100-020 Service Manual: BTS 68P02901W37. . . . . . . . . . . . . . . . . . . . . . . . . .
GSM-100-030 Service Manual: BSC/RXCDR 68P02901W38. . . . . . . . . . . . . . . . . .
GSM-105-020 Service Manual: M-Cell 2 68P02901W75. . . . . . . . . . . . . . . . . . . . . . .
GSM-106-020 Service Manual: M-Cell 6 68P02901W85. . . . . . . . . . . . . . . . . . . . . . .
GSM-201-020 Service Manual: M-Cell city and M-Cell city+ 68P02901W95. . . . . . .
GSM-202-020 Service Manual: M-Cell access 68P02901W65. . . . . . . . . . . . . . . . . .
GSM-203-020 Service Manual: Horizon micro 68P02902W36. . . . . . . . . . . . . . . . . .
GSM-206-020 Service Manual: Horizon compact 68P02902W15. . . . . . . . . . . . . . .
GSM-205-020 Service Manual: Horizon macro Indoor 68P02902W06. . . . . . . . . . .
GSM-204-020 Service Manual: Horizon macro Outdoor 68P02902W12. . . . . . . . . .
GSM-207-020 Service Manual: Horizon office 68P02902W46. . . . . . . . . . . . . . . . . .
GSM-209-020 Service Manual: Horizon micro2 Horizon compact2 68P02902W61.
GSM-208-020 Service Manual: Horizon macro 12 Carrier Outdoor 68P02902W66
GPRS service
manuals
The following are the Motorola GPRS service manuals, these manuals include
the Packet Control Unit (PCU) service manual which becomes part of the BSS
for GPRS:
GPRS-301-020 Service Manual:GPRS Support Nodes (GSN) 68P02903W05. . . . .
GPRS-302-020 Service Manual: Packet Control Unit (PCU) 68P02903W10. . . . . . .
Classification
number
The classification number is used to identify the type and level of a manual. For
example, manuals with the classification number GSM-100-2xx contain
operating information.
Order number
The Motorola 68P order (catalogue) number is used to order manuals.
Ordering
manuals
All orders for Motorola manuals must be placed with your Motorola Local Office
or Representative. Manuals are ordered using the order (catalogue) number.
Motorola manual sets may also be ordered on CD-ROM.

GSM-204-423
GMR amendment
31st Oct 01
14 Installation & Configuration: Horizon
macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A
GMR amendment
Introduction to
GMRs
Changes to a manual that occur after the printing date are incorporated into the
manual using General Manual Revisions (GMRs). GMRs are issued to correct
Motorola manuals as and when required. A GMR has the same identity as the
target manual. Each GMR is identified by a number in a sequence that starts at
01 for each manual at each issue. GMRs are issued in the form of loose leaf
pages, with a pink instruction sheet on the front.
GMR procedure
When a GMR is received, remove and replace pages in this manual, as detailed
on the GMR pink instruction sheet.

GSM-204-423 GMR amendment record
31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION 15
GMR amendment record
GMR
instructions
When a GMR is inserted in this manual, the amendment record below is
completed to record the GMR. Retain the pink instruction sheet that
accompanies each GMR and insert it in a suitable place in this manual for future
reference.
Amendment
record
Record the insertion of GMRs in this manual in the following table:
GMR number Incorporated by (signature) Date
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25

GSM-204-423
GMR amendment record
31st Oct 01
16 Installation & Configuration: Horizon
macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A

31st Oct 01
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION i
Chapter 1
Introduction to installation

GSM-204-423
31st Oct 01
ii Installation & Configuration: Horizon
macro outdoor
CONTROLLED INTRODUCTION
68P02902W03-A