Motorola PIP1000 CONNECT User manual

For:
PIP1000 CONNECT
User Guide
PIP1000 CONNECT
Wi-Fi® HD Video Baby Camera

Welcome...
to your new Motorola Wi-Fi®Video Baby
Motorized Camera!
Thank you for purchasing the Wi-Fi® Video Baby Motorized
Camera. Now you can see and hear your baby sleeping in
another room or you can monitor your older children in their
play room. Our Connected Baby Monitor let you see your baby
from your smartphone. Watch over and communicate with
your baby from anywhere in the world.
Please keep your original dated sales receipt for your records.
For warranty service of your Motorola product, you will need to
provide a copy of your dated sales receipt to confirm warranty
status. Registration is not required for warranty coverage.
For questions, warranty, support or service related to
the product, please contact us by visiting:
motorolanursery.com
This user guide has all the information you need to make the
most out of your product.
Please read the Safety Instructions on pages 6-8before you
install the unit.
Inside the Box
•1 x Wi-Fi® Camera
•1 x Wall Mount Bracket
•1 x Power adapter for Camera

Overview of Your Camera
Important guidelines for installing your Camera
•To use your Camera,you must have a Wi-Fi router to be connected
with and the Motorola Nursery app installed in your smart phone.
•Any large metal object, like a refrigerator, a mirror, a filing cabinet, a
metallic door or reinforced concrete, between the Camera and the Wi-Fi
router may block the radio signal.
• The signal strength may also be reduced by other solid structures, like walls,
or by radio or electrical equipment, such as TVs, computers, cordless or
mobile phones, fluorescent lights or dimmer switches.
•Other 2.4GHz products, such as Bluetooth™ systems, microwave ovens or
other Baby Monitors, may cause interference with this product, so keep
the Camera at least 5ft (1.5m) away from these types of product, or
switch them off if they appear to be causing interference.
•If the signal is weak, try moving the Camera to different positions in
the rooms.
1. Photo sensor (Night Vision
Mode)
2. Camera lens
3. Infrared LEDs under the camera
lens (x 8, for night vision)
4. High sensitivity microphone
5. Stand
6. Power/Link LED indicatior
7. PAIR button
8. Speaker
9. Power Socket
10. Temperature Sensor
1
24
5
3
10
9
8
7
6

4Table of contents
Table of contents
1. Safety Instructions..........................................................................6
2. Getting Started................................................................................8
2.1 Connecting the Power Supply for the Camera ...........................8
2.2 Fixing magnetic mount on the wall .................................................8
3. Using the Camera ........................................................................... 9
4.Viewing the baby through your device..................................... 10
5.Help .................................................................................................. 13
6.General Information...................................................................... 14
7.Technical Specifications .............................................................. 19

5
< This page has been intentionally left blank >

6Safety Instructions
1. Safety Instructions
WARNING:
Strangulation Hazard: Children have
STRANGLED in cords. Keep this cord
out of the reach of children (more than
3ft (1m) away). Never use extension
cords with AC Adapters. Only use the AC
Adapters provided.

7
Safety Instructions
Wi-Fi®CAMERA UNIT SET UP & USE:
•Choose a location for the Camera that will provide the
best view of your baby in his/her crib.
•Place the Camera on a flat surface, such as a dresser,
bureau or shelf, or mount the Camera on a wall securely
using the keyhole slots in the underside of the stand.
•NEVER place the Camera or cords within the crib.
WARNING
This Camera is compliant with all relevant standards regarding
electromagnetic fields and is, when handled as de-scribed in
the User’s Guide, safe to use. Therefore, always read the
instructions in this User’s Guide carefully before using the
device.
• Adult assembly is required. Keep small parts away from children
when assembling.
• This product is not a toy. Do not allow children to play with it.
•This Camera is not a substitute for responsible adult
supervision.
•Keep this User Guide for future reference.
• Keep the cords out of reach of children.
•Do not cover the Camera with a towel or blanket.
• Test this camera and all its functions so that you are familiar with
it prior to actual use.
• Do not use the Camera in damp areas or close to water.
•Do not install the Camera in extreme cold or heat, direct
sunlight, or close to a heat source.
•Only use the chargers and power adapters provided. Do not use
other chargers or power adapters as this may damage the
device.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adapters to easily accessible electrical sockets.
•The wall mounting height is less than 2m for the Camera.

8Getting Started
2.1 Connecting the Power Supply for the Camera
•Insert the DC plug of the power
adapter into the DC socket on the
back of the Camera.
•Connect the other end of the
power adapter to a suitable
electrical outlet.
•The Camera turns on and the
power indicator lights up blue.
Note
Only use the supplied power
adapter (DC5V/1000mA).
2.2 Fixing mount to the wall
• Mark the position of the screw holes on the wall.
•Install wall anchors (if suitable for the wall type) and the wall
mounting screws.
•Fix the camera on the wall mount bracket by fastening the screw.
2. Getting Started
Screw

9
Using the Camera
3.1 Setting Up
Place the Camera in a convenient location (e.g. on a table) and
point the camera lens towards the area you want to monitor.
NOTE
Do not place the Camera within the baby's reach! If there is inter-
ference with the picture or sound, try moving the units to different
locations, and ensure they are not close to other electrical equipment.
3.2 Night Vision Mode
The Camera has 8 high-intensity infrared LEDs for picking up clear
images in the dark. When the built-in photo sensor on the front of
the camera detects a low level of ambient light, the LEDs will
automatically activate and the screen on your smart phone will
display in black and white.
3.3 Talk Mode
The camera has a built-in speaker. By operating on the Motorola
Nursery app installed in your smart phone, you can talk to your
baby through your smart phone.
3.5Temperature Display (HH °C / °F or LL °C / °F) There
is a temperature sensor at the back of the camera. By operating
on the Motorola Nursery app installed in your smart phone, you
can monitor the environmental temperature at where the camera
is placed.
3.4Lullaby, Audio Book and Personal Sound Recording
The camera has a built-in speaker. By operating on the Motorola
Nursery app installed in your smart phone, you can operate the
camera to play lullabies, audio books and your personal sound
recordings.
3.Using the Camera

10
Viewing the baby through your device
4.1
4.Viewing the baby through your device
Minimum System Requirements
Android™ System
• Version 7.0 or above
iPhone®/iPad® iOS
• Version 10.0 or above
High Speed (Wi-Fi®) Internet
• At least 0.6 Mbps upload bandwidth per camera (you can test your internet
speed on this site: http://www.speedtest.net).
4.2 Connect your device
When a user tries to access the Wi-Fi® camera (baby unit), our server
authenticates the user’s identity and permits access to the Wi-Fi® camera
(baby unit).
Note
You can only set up through a compatible smartphone or tablet but not
through a PC.
Wi-Fi®
router
Outer
compatible device remotely
Access your camera locally
View your camera from any
Service
Camera