Motorola PIP10 User manual

MOTOROLA PIP10
DIGITAL AUDIO BABY MONITOR
For: PIP10
User Guide

Safety instructions
WARNING
Strangulation Hazard. Children have STRANGLED in cords. Keep
this cord out of the reach of children (more than 1 metre away).
Never use extension cords with AC Adaptors. Only use the AC
Adaptors provided.

Baby monitor setup and use:
• Determine a location for the baby unit that will allow you to hear your baby
in his/her cot.
• Place the baby unit on a flat surface, such as a dresser, bureau, or shelf or
mount the unit to a wall securely using the keyhole slots under the stand.
• NEVER place the baby unit or cords within the cot.
WARNING
This digital audio baby monitor is compliant with all relevant standards
regarding electromagnetic fields and is, when handled as described in the User
Guide, safe to use. Therefore, always read the instructions in this User Guide
carefully before using the device.
• Adult assembly is required. Keep small parts away from children when
assembling.
• This product is not a toy. Do not allow children to play with it.
• This digital audio baby monitor is not a substitute for responsible adult
supervision.
• Keep this User Guide for future reference.
• Keep the cords out of reach of children.
• Do not cover the digital audio baby monitor with a towel or blanket.
• Test this monitor and all its functions so that you are familiar with it prior to
actual use.
• Do not use the digital audio baby monitor in damp areas or close to water.
• Do not install the digital audio baby monitor in extreme cold or heat, direct
sunlight, or close to a heat source.
• Do not touch the plug contacts with sharp or metal objects.
• Connect the power adaptors to easily accessible mains power.
CAUTION
There is a risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.

Welcome...
to your new Motorola PIP10 Audio Baby Monitor!
• Secure, interference free reception and high-quality sound.
• Long range up to 160 feet indoors and 1000 feet outdoors.
• Microphone with high sensitivity.
• Battery powered portable parent unit.
• Expandable up to 2 parent units.
• Parent unit with mute function and alert indicator.
• Out of range and low battery alarm.
Need help?
If you have any problems setting up or using your PIP10, please visit us at
motorolanursery.com/support.
Alternatively, you may find the answer in the ‘Help’ section at the back of
this guide.

This User Guide provides you with all the information
you need to get the most from your digital audio
baby monitor.
Read the instructions carefully, and be aware that
this digital audio baby monitor is only intended as an
aid. It is not a substitute for responsible and proper
adult supervision.
Before you use the digital audio baby monitor, set
up the parent and baby units. Follow the simple
instructions in ‘Getting started’, on the next few
pages.
Important
Only use the power adaptors supplied.
Got everything?
• Parent unit
• Baby unit
• AC power adaptor for the parent unit
• AC power adaptor for the baby unit
If you have purchased PIP10 dual parent units, you will also have the
following additional items:
• Parent unit
• AC power adaptor for the parent unit

6
1. Getting started ...................................................................8
2. Getting to know your baby monitor ..........................11
3. Using the digital audio baby monitor.......................13
3.1 Turn the baby unit on / o...........................................................................13
3.2 Turn the parent unit on / o........................................................................13
3.3 Adjust the speaker volume on the parent unit.....................................13
3.4 Mute the speaker..............................................................................................13
3.5 Sound alert .........................................................................................................13
4. Help....................................................................................... 14
5. Technical Specifications.................................................15
6. General information........................................................ 16

7
< This page has been intentionally left blank >

8Getting started
1. Getting started
Location
Important
Do not place your PIP10 in the bathroom or other humid areas.
Place your units within reach of the AC power outlet and wall socket. The
socket-outlet should be installed near the equipment and should be easily
accessible.
Range of parent and baby units
Make sure the distance between the parent unit and baby unit is less than 300
metres.
Setting up
Important
The baby unit must be plugged into the AC power at all times. Use only the AC
power adaptor supplied with the product.

9
Getting started
Connecting the baby unit
1. Plug the DC plug of the power adaptor into the DC jack on the rear of the
baby unit and plug the other end of the AC adaptor into the AC power
outlet.
2. Switch on the AC power.
Installing batteries (not supplied) into the parent unit
1. Lift up the battery cover to remove it from the the parent unit.

10
2. Insert the battery cells (not supplied). Note the ’+’ and ’-’ markings inside
the battery compartment and insert in the correct direction.
3. Slide the battery cover back into place.
Note
You can either purchase non-rechargeble battery cells (2 x AAA batteries) or
rechargeable NIMH battery cells (2 x AAA batteries) for the parent unit.
Connecting the parent unit
You will need to carry out this process for the single or dual parent units.
1. Plug the DC plug of the power adaptor into the DC jack on the side of the
parent unit and plug the other end of the AC adaptor into the AC power
outlet.
2. Switch on the AC power. The parent unit turns on.
Note
The parent unit will not start charging if rechargeable NIMH battery cells are
installed.
Your PIP10 is now ready for use.
Getting started