Motorola PIP1010 Connect User manual

PIP1010 CONNECT
Quick Start Guide
EN
PIP1010 CONNECT_QSG_EN_AE_v1.indd 1PIP1010 CONNECT_QSG_EN_AE_v1.indd 1 2023/10/23 14:162023/10/23 14:16

2
1. At a glance
2. Connect
1. Plug the DC plug of the power adapter into the power socket on the rear
of the camera unit and plug the other end of the AC adapter into the wall
socket.
2. The camera unit turns on and the power indicator lights up in blue first and
changes to red flashing if not paired to the Motorola Nursery App.
WARNING
Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out
of the reach of children (more than 1 meter or 3 feet away). Do not remove the
tags from the AC Adapters. Only use the AC Adapters provided.
Note
Use only the supplied power adapter (DC5V / 1000 mA).
1. Camera
2. Desk stand
3. Speaker
4. Antenna
5. Power jack
1
2
3
5
4
6
7
6. Power indicator
Lights up in blue when powered on.
7. Pair button
(For information on how to connect the
camera unit to your device, see section 4.)
PIP1010 CONNECT_QSG_EN_AE_v1.indd 2PIP1010 CONNECT_QSG_EN_AE_v1.indd 2 2023/10/23 14:162023/10/23 14:16

3
3. Wall mount the camera unit
1. Mark the positions of 2 screw holes on the wall. Drill a screw hole at
each marking.
2. Install the supplied wall anchors into 2 screw holes on the wall.
3. Insert the supplied wall mounting screws into the wall anchors.
4. Remove the desk stand by loosening the screw on the underside of the
desk stand.
5. Fix and fasten this screw on the camera unit and the wall mount bracket.
6. Hang the wall mount bracket on the wall mounting screws on the wall.
Note
The pack includes a power adapter with a longer cord which is beneficial for
wall mount application, where your wall socket is far from the camera.
2
5.8mm
28.2mm
1
4 5 6
3
25mm
4.1mm
32.5mm
(1.28”)
6.0mm
(0.24”)
PIP1010 CONNECT_QSG_EN_AE_v1.indd 3PIP1010 CONNECT_QSG_EN_AE_v1.indd 3 2023/10/23 14:162023/10/23 14:16

4
4. View the baby through your device
Minimum system requirement of your device
• Android™ System: Version 7.0 or above
• iPhone® iOS: Version 11.0 or above
• High Speed 2.4GHz (Wi-Fi®) Internet: At least 0.6 Mbps upload
bandwidth per camera (you can test your internet speed on this site:
http://www.speedtest.net).
Connect to Wi-Fi® and use the Nursery App
1. Scan the QR code with your smart device and download the Motorola
Nursery App from App Store for iOS devices or from Google Play™ Store
for Android™ devices.
2. Install the App on your device.
3. Follow the on-screen instructions to run and sign up or log in to the App.
4. Open the Motorola Nursery App on your compatible smartphone.
5. Follow the in-app instructions to create your account and connect the
camera to your device.
6. When the connection is successfully established, you can remotely adjust
the camera with your device.
Note
If the connection is lost, check your Wi-Fi® settings and reconnect your Wi-Fi®
if necessary. Ensure the camera unit is switched on. Wait for a few minutes for
the camera unit to reconnect with your device.
View your camera
from any compatible
device remotely
Camera Connect to internet
via Wi-Fi® router
PIP1010 CONNECT_QSG_EN_AE_v1.indd 4PIP1010 CONNECT_QSG_EN_AE_v1.indd 4 2023/10/23 14:162023/10/23 14:16

5
5. Help
The baby (camera) unit has lost its link with your Wi-Fi router.
• The baby (camera) unit is too far away and may be out of range. Move it
closer to the Wi-Fi router.
• Power reset the baby (camera) units. Wait for about 15 seconds and
reconnect to the Wi-Fi router.
Noise interference
• Make sure there is at least (2 meter) 6 feet between your smart devices and
the baby (camera) units to avoid audio feedback.
• Make sure the baby (camera) units are not placed near other electrical
equipment, such as a television, computer or cordless/mobile telephone.
Move the baby (camera) units 1.5 meters (5 feet) away from other electrical
equipment.
• Use of other 2.4 GHz products, such as Bluetooth™ systems, or microwave
ovens, may cause interference with this product.
• If the signal is weak, try moving the baby (camera) units to dierent
positions in rooms.
Lost connection to your smart device
• Check your Wi-Fi® settings and power reset your Wi-Fi router if necessary.
Power reset the baby (camera) unit. Wait for a few minutes for the baby
(camera) unit to connect with the Wi-Fi® system.
System reset
• When problems cannot be fixed based on the above guides, you can try
to do a system reset. Note that after system reset, you will need to do the
pairing to the app again.
• System reset of the camera unit: press and hold the pair button on the
camera for about 20 seconds. Release it when you hear the voice prompt
'Reset Camera'. The camera is reset successfully.
PIP1010 CONNECT_QSG_EN_AE_v1.indd 5PIP1010 CONNECT_QSG_EN_AE_v1.indd 5 2023/10/23 14:162023/10/23 14:16

6
6. General information
Consumer Products and Accessories Warranty
Thank you for purchasing this Motorola branded product manufactured under
license by Meizhou Guo Wei Electronics Co. LTD., AD1 section, The economy
exploitation area, Meizhou, Guangdong, P.R.China . (“MZGW”)
What Does this Warranty Cover?
Subject to the exclusions contained below, MZGW warrants that this Motorola
branded product (“Product”) or certified accessory (“Accessory”) sold for use
with this product that it manufactured to be free from defects in materials and
workmanship under normal consumer usage for the period outlined below.
This Limited Warranty is your exclusive warranty and is not transferable.
Who is covered?
This warranty extends only to the first consumer purchaser, and is not
transferable.
What will MZGW do?
MZGW or its authorized distributor at its option and within a commercially
reasonable time, will at no charge repair or replace any Products or
Accessories that do not conform to this limited warranty. We may use
functionally equivalent reconditioned / refurbished / pre-owned or new
Products, Accessories or parts.
What Other Limitations Are There?
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT
PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA
OR MZGW BE LIABLE, WHETHER IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL
OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY
OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL
EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of incidental or
consequential damages, or limitation on the length of an implied warranty, so
the above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights that vary from one
jurisdiction to another.
PIP1010 CONNECT_QSG_EN_AE_v1.indd 6PIP1010 CONNECT_QSG_EN_AE_v1.indd 6 2023/10/23 14:162023/10/23 14:16

7
Products Covered Length of Coverage
Consumer Products One (1) year from the date of the
products original purchase by the first
consumer purchaser of the product.
Consumer Accessories (battery,
power supply(s) and line cords)
Ninety (90) days from the date of the
accessories original purchase by the first
consumer purchaser of the product.
Consumer Products and
Accessories that are Repaired or
Replaced
The balance of the original warranty or for
ninety (90) days from the date returned
to the consumer, whichever is longer.
Exclusions
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts
due to normal wear and tear are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below 80% of their
rated capacity and batteries that leak are covered by this limited warranty.
Abuse & Misuse. Defects or damage that result from:
• Improper operation, storage, misuse or abuse, accident or neglect, such
as physical damage (cracks, scratches, etc.) To the surface of the product
resulting from misuse;
• Contact with liquid, water, rain, extreme humidity or heavy perspiration,
sand, dirt or the like, extreme heat, or food;
• Use of the products or accessories for commercial purposes or subjecting
the product or accessory to abnormal usage or conditions; or
• Other acts which are not the fault of motorola or mzgw are excluded from
coverage.
Use of Non-Motorola branded Products and Accessories. Defects or damage
that result from the use of Non-Motorola branded or certified Products or
Accessories or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting
from service, testing, adjustment, installation, maintenance, alteration, or
modification in any way by someone other than Motorola, MZGW or its
authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with
• Serial numbers or date tags that have been removed, altered or obliterated;
• Broken seals or that show evidence of tampering;
• Mismatched board serial numbers; or
• Nonconforming or non-motorola branded housings, or parts, are excluded
from coverage.
Communication Services. Defects, damages, or the failure of Products or
Accessories due to any communication service or signal you may subscribe to
or use with the Products or Accessories is excluded from coverage.
PIP1010 CONNECT_QSG_EN_AE_v1.indd 7PIP1010 CONNECT_QSG_EN_AE_v1.indd 7 2023/10/23 14:162023/10/23 14:16

8
How to Obtain Warranty Service or Other Information?
To obtain service or information, please visit us at:
motorolanursery.com/support
You will receive instructions on how to ship the Products or Accessories at
your expense and risk, to a MZGW Authorized Repair Center.
To obtain service, you must include:
• The product or accessory;
• The original proof of purchase (receipt) which includes the date, place and
seller of the product;
• If a warranty card was included in your box, a completed warranty card
showing the serial number of the product;
• A written description of the problem; and, most importantly;
• Your address and telephone number.
FCC and IC regulations (FCC Part 15)
This equipment has been tested and found to comply with the requirements
for a Class B digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) rules.
Industry Canada
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Product disposal instructions
Product disposal instructions for residential users
When you have no further use for it, please remove any batteries
and dispose of them and the product according to your local
authority’s recycling processes. For more information, please
contact your local authority or the retailer where the product
was purchased.
Product disposal instructions for business users
Business users should contact their suppliers and check the
terms and conditions of the purchase contract and ensure
that this product is not mixed with other commercial waste for
disposal.
CE Declaration
This product is in compliance with the essential requirements and other
relevant provisions of the RED Directive 2014/53/EU.
PIP1010 CONNECT_QSG_EN_AE_v1.indd 8PIP1010 CONNECT_QSG_EN_AE_v1.indd 8 2023/10/23 14:162023/10/23 14:16

<This page has been intentionally left blank>
PIP1010 CONNECT_QSG_EN_AE_v1.indd 9PIP1010 CONNECT_QSG_EN_AE_v1.indd 9 2023/10/23 14:162023/10/23 14:16

<This page has been intentionally left blank>
PIP1010 CONNECT_QSG_EN_AE_v1.indd 10PIP1010 CONNECT_QSG_EN_AE_v1.indd 10 2023/10/23 14:162023/10/23 14:16

<This page has been intentionally left blank>
PIP1010 CONNECT_QSG_EN_AE_v1.indd 11PIP1010 CONNECT_QSG_EN_AE_v1.indd 11 2023/10/23 14:162023/10/23 14:16

Manufactured, distributed or sold by Meizhou Guo Wei
Electronics Co. LTD., ocial licensee for this product.
MOTOROLA and the Stylized M Logo are trademarks or
registered trademarks of Motorola Trademark Holdings,
LLC. and are used under license. All other trademarks
are the property of their respective owners. © 2023
Motorola Mobility LLC. All rights reserved.
Version 1 (EN_AE)
Printed in China
PIP1010 CONNECT_QSG_EN_AE_v1.indd 12PIP1010 CONNECT_QSG_EN_AE_v1.indd 12 2023/10/23 14:162023/10/23 14:16