Motorola Q700 User manual

Q700
Quick Start Guide

essentials
insert your SIM card
Your Subscriber Identity Module (SIM) card stores your
phone number and other information. Turn off your
device and remove your battery before you install
or remove a SIM card.
1 2
Tip: Hold your device with both hands and use your
thumbs to push battery cover.
Note: Before using your device for the
first time, be sure to review the important
safety information in the reference guide.
Periodically review this information so you
remember how to safely use your device.

essentials
insert a memory card
Memory cards are optional. You can use a removable
microSD memory card with your device to store and
retrieve multimedia content (such as photos and
sounds).
1 If necessary, remove the
back cover and battery.
Slide the memory card into
the card slot as shown.
insert your battery
1 2

essentials
charge your battery
New batteries are not
fully charged. Plug the
travel charger into the
mini-USB port on your
device as shown.
Plug the other end into
an electrical outlet.
Your device might take
several seconds to start charging the battery. Your
device’s red charge indicator comes on and a lightning
bolt appears over the battery charging icon, in the title
bar. The internal battery bars move while the battery
is charging, and stop when the battery is fully charged.
turn device on & off
To turn on your device, press
and hold
P for a few seconds
or until the display lights up.
To turn off your device, press
and hold
P for a few seconds.

essentials
registration
Before you can start using your device, you must
complete the registration steps. You’ll know your device
has been activated when the Welcome screen appears.
Just follow the prompts until you see the
Congratulations screen.
display
To open your display, hold
your device securely with
both hands, then push up on
the display with your thumbs.
The display springs smoothly
into the open position.
The normal operating position of the device
is horizontal, with the trackball on the right.

make a call
To make a call, from the Jump screen or Phone screen,
open the display and enter a phone number then,
press
O .
answer a call
To answer a call when your device rings, select Answer
or press
O .
To “hang up,” select End or press and hold N .
end a call
To end a call select End or press and hold N .
essentials

basics
your device
Introducing your new Motorola Q700 hiptop slide
device.
Directional Pad
Left Shoulder Key Right Shoulder Key
Headset Jack
USB/Power
Connection Port
Jump Key
Menu Key
Volume Keys Power On/Off Key
Cancel Key
End Key
Trackball
Send Key
Done Key
Microphone
Speaker
Keyboard
Battery charging
indicator
Tip: Scroll the trackball S or press the directional pad
R left, right, up or down to highlight items. Press the
trackball
T to select highlighted items and open pop-up
menus.

sound profiles
Each sound profile defines the volume of rings,
reminders, and system sounds. You can have up to eight
profiles. Six editable profiles are provided by default.
To create a new profile or modify an existing sound
profile:
Find it:
A > M > Settings > Sound Profiles
ringtone
Find it: A > Phone > M > Settings > General
1 Highlight the Incoming Call Ringtone pop-up menu,
then press
T . The ringtone categories are shown.
2 Highlight a category, then press T to open the
ringtones submenu. Scroll through the sounds,
you can preview each sound by hovering over it
for a few seconds.
3 Press T to select the ringtone you want and then
press C .
customize

backgrounds
You can customise the background on all application
splash screens.
Find it: A > M > Backgrounds
Highlight your choice of background from the submenu,
then press
T to select it.
applications
You can set application-specific preferences using the
Settings options found within the applications.
Find it: A > application > M > Settings
customize

address book
store a phone number
Find it: A > Address Book > M > New Contact
1 Enter your contact’s details. You only need to enter
basic “identity” information, a First or Last name.
2 When you have finished entering “identity”
information, select DONE or press C .
3 Scroll through the New Contact fields (such as
Personal Info , Phone , and Email ) and select Add or Edit
to enter additional contact information.
4 When you have finished entering additional contact
information, select DONE or press C .
call a stored phone number
Find it: A > Phone
1 Scroll to and select Look Up .
2 Enter a name to narrow your search.
3 Scroll to and highlight the phone number, then press
O to call.

messaging
send an sms
Find it: A > Phone Messaging > SMS > M > New Message
1 Select To to add a recipient. Enter the recipient’s
number or start entering their name to show
Address Book matches.
2 Scroll to the Compose field and press the keyboard
keys to enter text on the page.
Note: To view or change your autotext settings
press A > M > Settings > AutoText
3 When you finish the message, select Send or press
M + M.
receive an sms
When you receive a new sms, your device plays
an alert. Also, you will see a visual “balloon” notification
move across the title bar and then the sms indicator v
is displayed.
Press T to open an sms.

music player
play music files
Your device can play and store MP3, WAV, MIDI, WMA,
and AAC (MP4) music files.
Find it: Press A + C
Once the Mini Music Player is displayed, use the
trackball or directional pad to highlight a control,
then press T to perform the action. Press:
• Play or pause or
B .
• Play previous or
K .
• Play next or L .
select songs
To scroll through the songs in the Play Queue :
1 Scroll to and select .
2 Press S or R up or down to scroll through the
songs in your queue.

create a playlist
Find it: A > SonicBOOM
1 In the Browse Music screen, select one of the
categories, then select a song, artist, or album you
want in your playlist.
2 With the song, artist, or album highlighted press
M and select Add to Playlist > New Playlist .
3 Enter your new playlist name and press C to save
the playlist.
Press M > Play to listen to your new playlist.
You can also control playback from the Mini Music
Player, press
M > Open Mini Player .
music player

photos
take & store or send photos
Note: Some networks or plans do not support
messages with photos. For details, contact your
service provider.
Your camera lens is on the back of your device. To get
the clearest pictures, wipe the lens clean with a dry
cloth before you take a picture.
1 Press A > Camera > M > Capture New or press L
to see the camera viewfinder.
2 To take your photo, press L or use the trackball
to select the capture icon .
3 The photo preview appears on the display:
• Press B to discard the photo.
• Press C to save the photo to the album
you’ve selected.
• Select ] to send it via an Email or MMS
message.
By default, your photo will be saved to the Memory Card
Album if a memory card is inserted. To save to your
device, press M > Capture to > Device Album .

see stored photos
Find it: Press A > Camera > Memory Card Album or Device Album
To see a photo scroll to it and press T , then press M
> View > Full Screen .
photos

Bluetooth™ wireless
use a headset or handsfree
car kit
Your device can make handsfree calls using an optional
Bluetooth headset or car kit.
Note: The use of wireless devices while driving
may cause distraction. Discontinue a call if you can’t
concentrate on driving. Additionally, the use of wireless
devices and their accessories may be prohibited or
restricted in certain areas. Always obey the laws and
regulations on the use of these products.
Before you try to connect your device with a
handsfree device, make sure the device is on and
ready in pairing or bonding mode (see the user’s guide
for the device). You can connect your device with only
one device at a time.
Your device lists the devices it finds within range.
1 Press A > M > Bluetooth > Pairing, then scroll to
a device in the list and press the trackball T .
2 If necessary, enter the device passkey (such as 0000)
and then press C to connect to the device.

By default, your call’s sound will go through the device
handset. To send or receive your call using a Bluetooth
device, press M > Transfer Sound to , then select your
Bluetooth device from the submenu. When your device
is connected, the Bluetooth indicator i is highlighted
in the status bar.
When using a Motorola Bluetooth headset use the send/
end key on the headset to make and answer calls. The
sound will be automatically transferred to the headset.
For specific information about a device, refer to the
instructions that came with it.
Bluetooth™ wireless

accessories
H670 Bluetooth™
headset
H700 Bluetooth™
headset
IHF1000 Bluetooth™
Car Kit
Car Charger

www.hellomoto.com
Certain mobile phone features are dependent on the capabili-
ties and settings of your service provider’s network. Additionally,
certain features may not be activated by your service provider, and/or
the provider’s network settings may limit the feature’s functionality.
Always contact your service provider about feature availability
and functionality. All features, functionality, and other product
specifications, as well as the information contained in this user’s
guide are based upon the latest available information and are
believed to be accurate at the time of printing. Motorola reserves
the right to change or modify any information or specifications
without notice or obligation.
MOTOROLA and the Stylized M Logo are registered in the US Patent
& Trademark Office. All other product or service names are the
property of their respective owners.
© Motorola, Inc., 2007.