Motorola AXH01 User manual

Warning: Charge the handset for 16 hours before use.
Motorola AXH01
Wireless Home Telephone
with Alexa Built-In

Welcome...
to your new Motorola AXH01 wireless home telephone with
Alexa Built-In!
Before you can use Alexa you will need
• An active landline home telephone service.
• An active Caller Display subscription.
• An active internet connection and router.
• An Amazon account.
• The Amazon Alexa app.
Alexa
• Access Alexa at the touch of a button on your cordless handset.
• Instant access to your cell phone contacts to make calls via the Motorola
AXH01 handset over your land line.
General Features
• 2.0” 65k TFT bright backlit colour display (176 x 220).
• Laser etched backlit keypad.
• Polyphonic ringer melodies.
• Caller ID shows you who’s calling and see details of the callers in a Calls
lists.1
• Make internal calls, transfer external calls and hold 3-way conversation.
Need help?
If you have any problems setting up or using your Motorola AXH01, please
contact Customer services: xxxxxxxx
Alternatively, you may find the answer in the ‘Help’ section at the back of
this guide.
Please note that this equipment is not designed for making emergency
telephone calls when the power fails. Alternative arrangements should be
made for access to emergency services.
1 Some features may require a subscription from your local telephone
company.

This User Guide provides you with all the information
you need to get the most from your phone.
Before you make your first call or use Alexa you
will need to set up your phone. Follow the simple
instructions in ‘Getting Started’, on the next few
pages.
Got everything?
• AXH handset
• AXH charger cradle
• AXH base
• AC power adaptor for the base
• AC power adaptor for the charger cradle
• 2 x rechargeable Ni-MH battery cells
• Ethernet cable
• Telephone line cord
For a better tomorrow
We make every eort through our design, research, engineering and supply
chain management to make better products for everyone, focusing on both
social and environmental responsibility.
• Eco friendly packaging with a minimum 20% post consumer
recycled content.
• Phone housing is built with a minimum of 25% post consumer recycled
content plastic.

4
1. Getting started ................................................................... 7
2. Getting to know your phone.........................................11
3. Alexa ..................................................................................... 16
3.1 Download the Amazon Alexa app and sign in .....................................16
3.2 Download the Motorola AXH01 App and log into Alexa ..................16
3.3 To activate Alexa ..............................................................................................17
4. Using the phone................................................................18
4.1 Switch the handset on / o.........................................................................18
4.2 Calls .......................................................................................................................18
4.2.1 Make a call ..........................................................................................18
4.2.2 Preparatory dialling.........................................................................18
4.2.3 Make a call using speed dial keys..............................................18
4.2.4 End a call.............................................................................................18
4.2.5 Receive a call .....................................................................................19
4.3 Adjust the earpiece or hands-free volume.............................................19
4.4 Adjust the ringer volume ..............................................................................19
4.5 Mute.......................................................................................................................19
4.7 Intercom, second calls, transferring calls and conference calls.....19
4.7.1 Making an internal call ...................................................................19
4.7.2 Receiving an internal call ..............................................................19
4.7.3 Making a second call..................................................................... 20
4.7.4 Conference calls ............................................................................. 20
4.7.5 Transferring calls ..............................................................................21
4.7.6 Receiving a second call (call waiting)......................................21
4.8 Lock / unlock the keypad.............................................................................21
5. Contacts ..............................................................................22
5.1 View the details or dial an entry ...............................................................22
5.2 Predial an entry................................................................................................22
6. Calls List ..............................................................................23
6.1 New calls alert ..................................................................................................23
6.2 Dial a number in the calls list......................................................................23
6.3 Save a calls list number to the contact list ...........................................23
6.4 View the details of an entry........................................................................24
6.5 Delete an entry.................................................................................................24
6.6 Delete all calls list............................................................................................24

5
6.7 Predial an entry in the calls list..................................................................24
7. Clock & alarm ....................................................................25
7.1 Set the date and time....................................................................................25
7.2 Set the alarm.....................................................................................................25
8. Call settings ...................................................................... 26
8.1 Auto hang-up ...................................................................................................26
8.2 Auto answer ......................................................................................................26
8.3 Add a speed dial number.............................................................................26
8.4 Edit / Delete a speed dial number ...........................................................27
9. Handset settings ..............................................................28
9.1 Sound...................................................................................................................28
9.1.1 Ringer volume ..................................................................................28
9.1.2 Ringer melody..................................................................................28
9.1.3 Key beep.............................................................................................28
9.1.4 Out of range tone ...........................................................................29
9.1.5 Cradle tone........................................................................................29
9.2 Display.................................................................................................................29
9.2.1 Display contrast...............................................................................29
9.2.2 Wallpaper...........................................................................................29
9.2.3 Display backlight............................................................................ 30
9.3 Language........................................................................................................... 30
9.4 Registration ...................................................................................................... 30
9.5 De-registering a handset...............................................................................31
9.6 Handset name ...................................................................................................31
9.7 Restore to default settings...........................................................................31
9.8 Handset version................................................................................................31
10. Advanced settings ..........................................................32
10.1 DECT settings...................................................................................................32
10.1.1 Change PIN........................................................................................32
10.1.2 Clock master.....................................................................................32
10.1.3 ECO +...................................................................................................32
10.1.4 Base version......................................................................................32
10.1.5 Restore to default settings..........................................................33
10.2 Internal names..................................................................................................33
10.3 Line settings......................................................................................................33
10.3.1 Line name...........................................................................................33

6
10.3.2 Line ID .................................................................................................33
10.4 Line selection................................................................................................... 34
10.5 Default settings............................................................................................... 34
11. Technical Specifications................................................35
12. Help...................................................................................... 36
13. General information ....................................................... 38

7Getting started
1. Getting started
Location
Important
Do not place your Motorola AXH01 in the bathroom or other humid areas.
Place your Motorola AXH01 base within reach of the AC power outlet,
telephone wall socket and router. The AC outlet should be installed near the
equipment and should be easily accessible.
Note
If you are wall mounting your phone please refer to the wall mount template
on page 46.
Handset range
The unit has a range of up to 300 meters outdoors when there is a clear line
of sight between the base and handset. Any obstruction between the base
and handset will reduce the range significantly. With the base indoors and the
handset either indoors or outdoors, the range will normally be up to 50 meters.
Thick concrete and stone walls can severely aect the range.
Signal strength
The on your handset indicates that you are within range of the base. When
out of range of the base, the handset will display . If you are on a call, and the
out of range tone is set to on, you will hear a warning beep.
The line will hang up if the handset moves out of range of the base. Move
closer to the base and the handset will automatically reconnect.
Setting up
Important
The base station must be plugged into the AC power outlet at all times. Use
only the AC power adaptor and telephone line cord supplied with the product.
Connecting the base

8 Getting started
1. Plug the telephone line cord into the socket marked on the rear of the
base and plug the other end into the telephone wall socket.
2. Plug the AC power adaptor into the socket marked on the rear of the
base and plug the other end into the AC outlet. Switch on the AC power.
3. Plug the Ethernet cable into the socket marked on the rear of the base
and plug the other end into the router.
Connecting the charger
1. Plug the AC power adaptor into the socket marked on the rear of the
charger and plug the other end into the AC power outlet. Switch on the AC
power.
Installing and charging the handset
1. Remove the battery cover from the back of the handset and insert
the rechargeable Ni-MH battery cells supplied. Please note the ’+’ and
’-’ markings inside the battery compartment and insert in the correct
direction.
2. Slide the battery cover back into place.
3. If you are charging the batteries for the first time, place the handset on the
charger to charge for at least 16 hours continuously.
4. When the handset is fully charged, will appear steady on the display.
1
Slide
2
Press down

9Getting started
Important
Warning! Use only the approved rechargeable Ni-MH battery cells (2 x AAA Ni-
MH 750mAh rechargeable batteries) supplied with your Motorola AXH01.
Battery low warning
If you hear a warning beep every 60 seconds during a call, you will need to
recharge the handset before you can use it again.
When charging, will scroll on the display.
Battery performance
In ideal conditions, fully charged batteries should give up to 17.5 hours talk
time or up to 300 hours standby time on a single charge.1
Note that new batteries do not reach their full capacity until they have been
put to normal use for several days.
To keep your batteries in the best condition, leave the handset o the charger
for a few hours at a time.
Running the batteries right down at least once a week will help them last as
long as possible.
The charge capacity of rechargeable batteries will reduce with time as they
wear out, giving the handset less talk / standby time. Eventually they will need
to be replaced.
After charging your handset for the first time, subsequent charging time
is about 6–8 hours a day. Batteries and handset may become warm during
charging. This is normal.
1All talk and standby times are approximate and depend on features selected
and usage pattern.
Date and time
The date and time is set automatically when registered to the base. You can
change the date and time format to show MM/DD or DD/MM and 12 hours or
24 hours.
Note
The phone can be set so that the base or handset can be the clock master,
once set this will sync across all handset. If you have the handset set to clock
master as well as changing the format you can set the date and time manually.
1. Press
Menu , scroll uto Clock & Alarm and press Select .
2.
Date/Time is highlighted. Press Select .
3. To change the date format, scroll dto
Date Format and scroll tor uto
select either MM/DD or DD/MM .
4. Scroll uto
Enter Date , enter the date, e.g. when set to MM/DD, 08/27/19 for
27 August 2019 and press
Ok .
5. Once the date is set, to change the time format, scroll dto
Time Format
and scroll tor uto select either
12 Hours or 24 Hours .

10 Getting started
6. Scroll uto Enter Time , enter the time, e.g. when set to 24 Hours, 1430 for
2:30pm and press Save .
If the current time format setting is 12 hour, scroll tor uto select
AM or PM .
7. Press eto return to standby.
Setting up Alexa
In order to set-up the Motorola AXH01 to work with Alexa, landline and
Alexa2Alexa (A2A) calling you need the following:
1. An active landline home telephone service.
2. An active Caller Display subscription.
3. An active internet connection and router.
4. An Amazon account. https://www.amazon.com
5. The Amazon Alexa app. Download it free to your cell phone.
Start the download process in your mobile browser at http:/alexa.amazon.
com
Your Motorola AXH01 is now ready for use.

11
2. Getting to know your phone
Overview of your handset
A Ring indicator LED
Flashes when the phone rings.
B Display
For display icons, see “Display” on page 13.
C Left softkey / Menu / OK
Enter the main menu.
Select the option displayed on screen.
Confirm a menu option.
D Scroll up / Volume up
Scroll up through lists and menus.
During a call, press to increase the earpiece and hands-free volume.
In standby, press to enter the handset ringer volume setting.
When you have entered the handset ringer volume setting, press to
increase the handset ringer volume. When the phone is ringing, press to
increase the handset ringer volume.
E Scroll left / Contacts / Flash
Scroll left when in the menu options.
Press to move the cursor to the left.
Press to enter the contact list menu.
Press and hold for switchboard / PABX services and some network
services.
Getting to know your phone
A
B
C
D
E
F
G
P
O
N
M
L
K
I
J
H
Q

12 Getting to know your phone
F Talk / Hands-free / Line selection
Make or answer a call.
Activate and deactivate hands-free during a call.
Press and hold to open the Line selection menu.
G Scroll down / Volume down
Scroll down through lists and settings.
During a call, press to decrease the earpiece and hands-free volume.
In standby, when you have entered the handset ringer volume setting, press
to decrease the handset ringer volume. When the phone is ringing press to
decrease the handset ringer volume.
H Speed dial keys
Press and hold to view / edit / dial the speed dial information for that key.
I * / Change case / Pulse to tone dialling / Ringer o
Press to dial a *.
Press to change the case when entering letters / editing.
During a call, press and hold to switch from pulse dialling to tone dialling.
(This feature is base dependent).
Press and hold in standby to turn the ringer on / o.
J Space / Pause
Press to insert a space during text editing.
Press and hold to enter a pause (P) when dialling or storing numbers or
when in call mode.
K Earpiece
L Right softkey / Clear / Back / Call list
Delete characters on screen when entering names and numbers.
When
Back is displayed on the screen, press to go back to the previous
menu.
In standby, press to enter the call list.
M Scroll right / Redial / Intercom
Scroll right when in the menu options.
Press to move the cursor to the right.
Press to enter the redial list.
In standby, press and hold for intercom.
N Alexa key
Press to activate Alexa.
O End call / Power on/o / Exit
Press to end a call.
In standby, press and hold to switch the phone o.
When the handset is switched o press to turn the handset on.
When in the menu press to return to standby.
P # / Keypad lock
Dial a #.
Press and hold to lock the keypad.
In editing mode, press to bring up symbols.
Q Microphone

13
Getting to know your phone
Display overview
Signal icon
Displays when in hands-free mode
Mute is activated
Ringer is switched o
Indicates a missed call
Indicates a message has been left
Alexa Notification icon
Alarm is set
Batteries are fully charged
Batteries are partially charged
Batteries are running low
Batteries are almost fully discharged
Batteries are empty

14 Getting to know your phone
Overview of the charger
A Charging contacts
Navigating the menus
Your Motorola AXH01 has an easy to use menu system on the handset.
Each menu has a list of options, which you can see on the menu map on the
following page.
Scrolling through menus
1. From the standby screen, press
Menu .
The main menu is opened.
2. Use the u/ d/ B(t) / r(u) keys to scroll through the menu.
3. Left softkey - press to action the corresponding word prompt shown in the
lower left corner of the display.
Right softkey - press to action the corresponding word prompt in the lower
right corner of the display.
4. Press eto return to standby.
A

15
Getting to know your phone
Menu map
Contacts
Press Bto enter the
phonebook.
View 1
Predial 1
Call List
Missed Calls
Received Calls
Outgoing Calls
Accepted Calls
All Call
Clock & Alarm
Date/Time
Alarm
Call Settings
Auto Hang-up
Auto Answer
Speed Dial
Handset Settings
Sound
Ringer Volume
Ringtone
Key Beep
Out Range Tone
Cradle Tone
Display
Contrast
Wallpaper
Backlight Timeout
Language
Registration
Handset Name
Handset Setback
Handset Version
Advance Settings
DECT Settings
Change PIN
Clock Master
ECO +
Base Version
Base Setback
Internal Names
Line Settings
Line Selection

16 Alexa
3. Alexa
3.1 Setting up
Download the Amazon Alexa app
With the Amazon Alexa app, you can set up your phone, manage shopping
lists, alarms, music, and much more. The Amazon Alexa app is available on cell
phones with:
Fire OS 3.0 or higher
Android 5.0 or higher
iOS 9.0 or higher
To download the Amazon Alexa app, go to the app store on your mobile
device and search for “Amazon Alexa app.” Select and download the app.
Once you have downloaded the Amazon Alexa app go to your cell phone’s
home screen and click on the icon, you will then be asked to log using your
Amazon account details.
Download the hello voice app and log into Alexa
Download the hello voice app to your cell phone (Go to the app store on your
mobile device and search for hello voice app). Select and download the app.
Ensure your cell phone is using the same Wi-Fi connection as the router your
base is plugged into.
Once you have downloaded the app, go to your cell phone’s home screen and
click on the icon.
Once the app is open it will automatically search for all active devises. Select
the devise you want and select
Done .
You will then be asked to log into Amazon Alexa through the hello voice app.
Select
Amazon Alexa Login , you will then be asked to log using your Amazon
account details.
After you get the “Login success” page you can start using your AXH01.

17
Alexa
3.3 To activate Alexa
1. Press to activate Alexa, the display will show Alexa
listening... and a beep will be heard.
2. You can then ask Alexa what you need.
For example:
Alexa what’s the weather today.
The screen will display
Alexa thinking... .
3. The display will show
Alexa speaking... when a response
is provided.

18 Using the phone
4. Using the phone
4.1 Switch the handset on / o
1. To power the handset o, press and hold efor about 5 seconds.
2.
Confirm? is displayed, press Yes to confirm or No to cancel.
3. Press eto turn the handset back on.
4.2 Calls
4.2.1 Make a call
When making calls you can pre set the line selection to auto, manual or
individual line selection, see page 35. The default setting is auto, when a
call is made the base will automatically select the line.
1. Press t.
2. Dial the number.
If the line selection is set to manual, press tscroll uor dto highlight
Auto
or
Line Name and press Select , if Line Name is selected scroll uor dto the
desired line and press Select , then dial the number.
3. Press tagain to switch to hands-free call.
Note
Your phone will automatically time the duration of all external calls, the call
timer will display on the screen. When the call ends, the total duration of your
talk time is shown for 1 second.
4.2.2 Preparatory dialling
1. Dial the number first. If you make a mistake press
Clear to delete the last
digit.
2. Press tto dial.
If the line selection is set to manual, press tscroll uor dto highlight
Auto
or
Line Name and press Select , if Line Name is selected scroll uor dto the
desired line and press Select .
3. Press tagain to switch to hands-free call.
4.2.3 Make a call using speed dial keys
1. Press and hold the relevant keypad number (1-9), press tthe number will
be dialled automatically.
If the line selection is set to manual, press tscroll uor dto highlight
Auto
or
Line Name and press Select , if Line Name is selected scroll uor dto the
desired line and press Select .
Note
To assign a speed dial number, see page 26.
4.2.4 End a call
Press O, or place the handset back on the charger.

19
Using the phone
Note
You can end calls simply by placing the handset on the charger. To turn this
feature o, see Auto hang-up, see page 26 .
4.2.5 Receive a call
When you receive an external call, the phone rings, , the line information
and the phone number (or name if stored in the contact list) is displayed.
1. Press tto answer the call and press tagain to switch to hands-free.
Note
If you prefer for the call to be automatically answered when you lift the
handset o the charger, you will need to switch Auto answer on, see page
26.
4.3 Adjust the earpiece or hands-free volume
1. During a call, press uto increase and dto decrease the volume level.
There are 5 levels to choose from, volumes 1-5.
4.4 Adjust the ringer volume
In standby, press uand then scroll uor dto select the desired volume level.
While the phone is ringing, press uor dto select the desired volume level.
Press and hold in standby to turn the ringer o. Press and hold again to
turn the ringer back on.
4.5 Mute
1. During a call press Mute , m is displayed.
2. To turn mute o, press
Unmute .
4.7 Intercom, second calls, transferring calls and conference
calls
4.7.1 Making an internal call
If more than one handset is registered to the base, an internal call can be made
between handsets and a second call can also be made, see page 20.
1. If 2 handsets are registered to the base, press
Intercom and the other
handset rings automatically.
2. If 2 or more handsets are registered to the base, press
Intercom and scroll
dto select the handset that is to be called, press
Select .
4.7.2 Receiving an internal call
When an internal call is received, the handset name or number that is calling is
displayed.
1. Press
Silence to stop the handset ringing.
2. Press
Reject to reject the call.
3. Press tto answer the call.

20 Using the phone
4.7.3 Making a second call
When on an internal or external call you can make a second internal or external
call without ending the first call.
Second internal call
During a call:
1. Press
Option and scroll d Intercom and press Select .
2. If 2 handsets are registered to the base the other handset rings
automatically.
3. If 2 or more handsets are registered to the base, scroll dto select the
handset that is to be called, or select All Handsets to ring all handsets, press
Select .
4. When the second handset answers you can have an internal conversion.
5. Press
Option , then scroll uor dto the required option.
Switch Calls - to switch between the 2 calls.
Conference - to join the 2 calls to make a 3-way call.
Transfer - to transfer the call to the second handset.
Release Active - to end the active call.
Second external call
During a call:
1. Press
Option and scroll dto Add Call , press Select .
2. You can either:
Dial the number manually.
Press B- to dial a number in the contact list.
Press d- to dial a number in the call list.
Then press Dial to dial.
3. If the line selection is set to manual, press tscroll uor dto highlight
Auto
or Line Name and press Select , if Line Name is selected scroll uor
dto the desired line and press
Select.
4. When the second call answers you can have a conversion.
5. Or select the following options:
Press
Option , then scroll uor dto the required option.
Switch Calls - to switch between the 2 calls.
Conference - to join the 2 calls to make a 3-way call.
Transfer - to transfer the call to the second handset.
Release Active - to end the active call.
4.7.4 Conference calls
If intrusion calls is set to allowed, see page 34, when a handset is on a call a
second handset can initiate a conference call. Press ton the second handset
and it will take the same line and a conference call will begin.